We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FPQTD12T-P[13-16/0.01]-L[12-18/1]-B[3-20/0.1]
Description
Spherical Large Head/Tapped/P Configurable
Stock availability:
On request
If you are pursuing MISUMI FPQTD12T-P[13-16/0.01]-L[12-18/1]-B[3-20/0.1], communicate with FAMAGA, the world's chief distributor of factory-made equipment. Our company has existed for more than ten years - these are years of experience, which are expressed in the quality of goods and special attention to each client. We cherish everyone, who conspired with us - so, our regular consumers obtain the most attractive purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 650 purchases are terminated per day, because FAMAGA works all over the world Germany, United Kingdom, Liechtenstein, Australia, Rwanda, Algeria, Lebanon, Kuwait, Canada, Dominica, Armenia, Israel, Morocco, Switzerland, South Korea, Malta, Turkmenistan, Fiji, Botswana, Japan, Ecuador, Suriname, Samoa, Andorra, Malaysia, India, Brunei, Qatar, Greece, Pakistan, Estonia, Georgia, Comoros, Angola, United Arab Emirates, Philippines, Latvia, Tajikistan, Equatorial Guinea, Guatemala, Libya. A well-shaped logistics series and a partnership network assist us to deliver our units anywhere in the earth with no delay without compromising product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are assured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this amount is growing every day. We are proud that consumers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To request or order, call us by phone or write a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQT | BB (Round) | JPQT | A (Round) D (Diamond) | FPQT | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQT | GFPQT | ||||
EN 1.4301 Equiv.* | - | - | SJPQT | SJPQT | SFPQT | ||||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQT | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQT | CJPQT | CFPQT | ||||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | MJPQT | MFPQT | ||||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffed | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQT | ||||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | MCJPQT | MCFPQT |
Part Number | - | P | - | L | - | B |
JPQTA6 MFPQTA6 | - - | 10.0 P10.00 | - | L10 | - | B5.0 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N cm | |||||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||||
JPQT SJPQT CJPQT | BB (Round) | 6 | -0.004 -0.012 | 7 | 8 | 9 | 10 | 10 | 8 | M3 | 147 | 5 | ||||||||||
8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 15 | M5 | 676 | 8 | ||||||||||||
10 | 11 | 12 | 13 | 15 | 10 | |||||||||||||||||
12 | -0.006 -0.017 | 15 | 16 | |||||||||||||||||||
16 | 18 | 19 | 20 | 24 | 25 | 22 | M8 | 2803 | 12 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque Ncm | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQT GJPQT SJPQT CJPQT (Buff Finished) MJPQT MCJPQT | A (Round) D (Diamond) | 5 | -0.004 -0.012 | 5.50~8.00 | 10 | 6 | M2 | - | 3 | 2.2 |
6 | 6.50~10.00 | 8 | M3 | 147 | 5 | 3 | ||||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | 9.00~13.00 | 15 | M5 | 676 | 8 | 3.5 | |||
8T | M4 | 333 | 6 | |||||||
10 | 11.00~15.00 | 10 | M5 | 676 | 8 | 4 | ||||
12 | -0.006 -0.017 | 13.00~16.00 | 5 | |||||||
13 | 14.00~18.00 | 22 | M8 | 2803 | 10 | 5.5 | ||||
16 | 17.00~25.00 | 12 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque Ncm | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQT GFPQT SFPQT HFPQT CFPQT (Buff Finished) MFPQT MGFPQT MCFPQT | A (Round) D (Diamond) | 5 | -0.004 -0.012 | 5.50~8.00 | 5(9)~10 | 2.0~10.0 | M2 | - | 3 | 2.2 |
6 | 6.50~10.00 | 6(9)~12 | 2.0~12.0 | M3 | 147 | 5 | 3 | |||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | 9.00~13.00 | 8(12)~16 | 2.0~15.0 | M5 | 676 | 8 | 3.5 | ||
8T | 6(12)~16 | M4 | 333 | 6 | ||||||
10 | 11.00~15.00 | 10(12)~20 | 3.0~20.0 | M5 | 676 | 8 | 4 | |||
10T | 6(12)~16 | M4 | 333 | 6 | ||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~20.0 | M5 | 676 | 8 | 5 | ||
12T | 8(12)~18 | M4 | 333 | 6 | ||||||
13 | 14.00~18.00 | 13(14)~26 | 5.0~20.0 | M8 | 2803 | 10 | 5.5 | |||
13T | 8(14)~20 | M6 | 1156 | 9 | ||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | M8 | 2803 | 12 | 7 | |||
16T | 10(14)~24 | M6 | 1156 | 9 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~20.0 | M8 | 2803 | 12 | 9 | ||
20T | 12(18)~30 | M6 | 1156 | 9 |