We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FPQTA20-P[22-30/0.01]-L[20-40/1]-B[5-20/0.1]
Description
Spherical Large Head/Tapped/P Configurable
Stock availability:
On request
If you are pursuing MISUMI FPQTA20-P[22-30/0.01]-L[20-40/1]-B[5-20/0.1], reach FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and special attention to each buyer. We esteem everyone, who liased with us - so, our regular consumers procure the most beneficial purchase terms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Jordan, Bangladesh, Austria, Dominican Republic, Malawi, Dominica, Haiti, Zambia, Paraguay, East Timor, Cape Verde, Mexico, Eswatini, Burundi, Netherlands, Egypt, Fiji, Tunisia, Mauritius, Ireland, Kenya, Vietnam, Laos, Morocco, Russia, Switzerland, Brazil, Guatemala, Finland, Qatar, Indonesia, Croatia, Djibouti, Panama, Swaziland, Philippines, The Gambia, South Korea, Montenegro. A well-built logistics network and a partnership network allow us to ship our goods anywhere in the world quickly without compromising product quality.
A specific source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the sphere of industrial equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that purchasers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or write a message to the online chat on our official website. You can also forward a list of the needful equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQT | BB (Round) | JPQT | A (Round) D (Diamond) | FPQT | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQT | GFPQT | ||||
EN 1.4301 Equiv.* | - | - | SJPQT | SJPQT | SFPQT | ||||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQT | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQT | CJPQT | CFPQT | ||||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | MJPQT | MFPQT | ||||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffed | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQT | ||||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | MCJPQT | MCFPQT |
Part Number | - | P | - | L | - | B |
JPQTA6 MFPQTA6 | - - | 10.0 P10.00 | - | L10 | - | B5.0 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N cm | |||||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||||
JPQT SJPQT CJPQT | BB (Round) | 6 | -0.004 -0.012 | 7 | 8 | 9 | 10 | 10 | 8 | M3 | 147 | 5 | ||||||||||
8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 15 | M5 | 676 | 8 | ||||||||||||
10 | 11 | 12 | 13 | 15 | 10 | |||||||||||||||||
12 | -0.006 -0.017 | 15 | 16 | |||||||||||||||||||
16 | 18 | 19 | 20 | 24 | 25 | 22 | M8 | 2803 | 12 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque Ncm | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQT GJPQT SJPQT CJPQT (Buff Finished) MJPQT MCJPQT | A (Round) D (Diamond) | 5 | -0.004 -0.012 | 5.50~8.00 | 10 | 6 | M2 | - | 3 | 2.2 |
6 | 6.50~10.00 | 8 | M3 | 147 | 5 | 3 | ||||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | 9.00~13.00 | 15 | M5 | 676 | 8 | 3.5 | |||
8T | M4 | 333 | 6 | |||||||
10 | 11.00~15.00 | 10 | M5 | 676 | 8 | 4 | ||||
12 | -0.006 -0.017 | 13.00~16.00 | 5 | |||||||
13 | 14.00~18.00 | 22 | M8 | 2803 | 10 | 5.5 | ||||
16 | 17.00~25.00 | 12 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque Ncm | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQT GFPQT SFPQT HFPQT CFPQT (Buff Finished) MFPQT MGFPQT MCFPQT | A (Round) D (Diamond) | 5 | -0.004 -0.012 | 5.50~8.00 | 5(9)~10 | 2.0~10.0 | M2 | - | 3 | 2.2 |
6 | 6.50~10.00 | 6(9)~12 | 2.0~12.0 | M3 | 147 | 5 | 3 | |||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | 9.00~13.00 | 8(12)~16 | 2.0~15.0 | M5 | 676 | 8 | 3.5 | ||
8T | 6(12)~16 | M4 | 333 | 6 | ||||||
10 | 11.00~15.00 | 10(12)~20 | 3.0~20.0 | M5 | 676 | 8 | 4 | |||
10T | 6(12)~16 | M4 | 333 | 6 | ||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~20.0 | M5 | 676 | 8 | 5 | ||
12T | 8(12)~18 | M4 | 333 | 6 | ||||||
13 | 14.00~18.00 | 13(14)~26 | 5.0~20.0 | M8 | 2803 | 10 | 5.5 | |||
13T | 8(14)~20 | M6 | 1156 | 9 | ||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | M8 | 2803 | 12 | 7 | |||
16T | 10(14)~24 | M6 | 1156 | 9 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~20.0 | M8 | 2803 | 12 | 9 | ||
20T | 12(18)~30 | M6 | 1156 | 9 |