We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
CJPQTBB6-10
Description
Spherical Large Head/Tapped/P Configurable
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are seeking MISUMI CJPQTBB6-10, reach FAMAGA, the world's primary vendor of industrialized equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of products and special attention to each client. We admire everyone, who cooperated with us - thus, our regular customers procure the most attractive purchase terms and discounts on the industrial equipment market. Now, there are more than 4500 such buyers, and we constantly arrange new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Togo, France, Syria, Dominican Republic, Liberia, Georgia, Lebanon, Netherlands, Poland, Malawi, Dominica, Saudi Arabia, Niger, Uganda, Finland, Bolivia, Cameroon, Bulgaria, Eswatini, China, Russia, Ghana, Botswana, Greece, South Korea, Fiji, Norway, Mali, Madagascar, Montenegro, Kyrgyzstan, Mongolia, Algeria, Nigeria, Moldova, Zambia, Bosnia and Herzegovina, Armenia, Macedonia, Iran, Costa Rica. A well-elaborated logistics system and a partnership network help us to deliver our goods anywhere in the globe on-time without undermining product quality.
A specific source of repute for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the field of industrial equipment.
All merchandises from FAMAGA are affirmed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been provided, and this bulk is ascending every day. We are pleased that consumers choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as keep on top of it.
To get some advice or book, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
| Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
| Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
| EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQT | BB (Round) | JPQT | A (Round) D (Diamond) | FPQT | A (Round) D (Diamond) | |
| EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQT | GFPQT | ||||
| EN 1.4301 Equiv.* | - | - | SJPQT | SJPQT | SFPQT | ||||
| EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQT | ||||
| EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQT | CJPQT | CFPQT | ||||
| EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | MJPQT | MFPQT | ||||
| EN 1.2510 Equiv. | Hard Chrome Plating + Buffed | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQT | ||||
| EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | MCJPQT | MCFPQT |
| Part Number | - | P | - | L | - | B |
| JPQTA6 MFPQTA6 | - - | 10.0 P10.00 | - | L10 | - | B5.0 |
| Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N cm | |||||||||||||||||
| Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||||
| JPQT SJPQT CJPQT | BB (Round) | 6 | -0.004 -0.012 | 7 | 8 | 9 | 10 | 10 | 8 | M3 | 147 | 5 | ||||||||||
| 8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 15 | M5 | 676 | 8 | ||||||||||||
| 10 | 11 | 12 | 13 | 15 | 10 | |||||||||||||||||
| 12 | -0.006 -0.017 | 15 | 16 | |||||||||||||||||||
| 16 | 18 | 19 | 20 | 24 | 25 | 22 | M8 | 2803 | 12 |
| Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque Ncm | (W) | ||||
| Type | Shape | D | D dim. Tolerance g6 | |||||||
| JPQT GJPQT SJPQT CJPQT (Buff Finished) MJPQT MCJPQT | A (Round) D (Diamond) | 5 | -0.004 -0.012 | 5.50~8.00 | 10 | 6 | M2 | - | 3 | 2.2 |
| 6 | 6.50~10.00 | 8 | M3 | 147 | 5 | 3 | ||||
| 6T | M2.6 | - | 4 | |||||||
| 8 | -0.005 -0.014 | 9.00~13.00 | 15 | M5 | 676 | 8 | 3.5 | |||
| 8T | M4 | 333 | 6 | |||||||
| 10 | 11.00~15.00 | 10 | M5 | 676 | 8 | 4 | ||||
| 12 | -0.006 -0.017 | 13.00~16.00 | 5 | |||||||
| 13 | 14.00~18.00 | 22 | M8 | 2803 | 10 | 5.5 | ||||
| 16 | 17.00~25.00 | 12 | 7 | |||||||
| 20 | -0.007 -0.020 | 22.00~30.00 | 30 | 15 | 9 |
| Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque Ncm | (W) | ||||
| Type | Shape | D | D dim. Tolerance g6 | |||||||
| FPQT GFPQT SFPQT HFPQT CFPQT (Buff Finished) MFPQT MGFPQT MCFPQT | A (Round) D (Diamond) | 5 | -0.004 -0.012 | 5.50~8.00 | 5(9)~10 | 2.0~10.0 | M2 | - | 3 | 2.2 |
| 6 | 6.50~10.00 | 6(9)~12 | 2.0~12.0 | M3 | 147 | 5 | 3 | |||
| 6T | M2.6 | - | 4 | |||||||
| 8 | -0.005 -0.014 | 9.00~13.00 | 8(12)~16 | 2.0~15.0 | M5 | 676 | 8 | 3.5 | ||
| 8T | 6(12)~16 | M4 | 333 | 6 | ||||||
| 10 | 11.00~15.00 | 10(12)~20 | 3.0~20.0 | M5 | 676 | 8 | 4 | |||
| 10T | 6(12)~16 | M4 | 333 | 6 | ||||||
| 12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~20.0 | M5 | 676 | 8 | 5 | ||
| 12T | 8(12)~18 | M4 | 333 | 6 | ||||||
| 13 | 14.00~18.00 | 13(14)~26 | 5.0~20.0 | M8 | 2803 | 10 | 5.5 | |||
| 13T | 8(14)~20 | M6 | 1156 | 9 | ||||||
| 16 | 17.00~25.00 | 16~32 | 5.0~20.0 | M8 | 2803 | 12 | 7 | |||
| 16T | 10(14)~24 | M6 | 1156 | 9 | ||||||
| 20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~20.0 | M8 | 2803 | 12 | 9 | ||
| 20T | 12(18)~30 | M6 | 1156 | 9 |
