We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
GFPQSTA6-P[4-6/0.01]-L[8-12/1]-B[2-12/0.1]
Description
Spherical Small Head/Tapped/P Configurable
Stock availability:
On request
If you are questing MISUMI GFPQSTA6-P[4-6/0.01]-L[8-12/1]-B[2-12/0.1], communicate with FAMAGA, the world's top supplier of industrialized equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of goods and personalseparate attention to each user. We appreciate everyone, who collaborated with us - so, our regular purchasers bring in the most flexible purchase terms and discounts on the industrial equipment market. Nowadays, there are more than 4 thousand such customers, and we constantly sign new agreements. More than 650 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, Honduras, Comoros, Benin, United Arab Emirates, Czech Republic, Finland, Suriname, Poland, Dominican Republic, Madagascar, Myanmar, Australia, Belarus, Nepal, Switzerland, Rwanda, Malaysia, United States, South Sudan, Romania, Burundi, Malta, Fiji, Jamaica, Samoa, Algeria, Egypt, Cyprus, Denmark, Botswana, Mexico, Sudan, Philippines, Nigeria, Guatemala, Mozambique, Seychelles, Slovakia, Uganda, Djibouti, Mali, Serbia, Iraq, China, Ukraine, Kuwait, Costa Rica. A well-shaped logistics system and a partnership network assist us to ship our units anywhere in the earth with no delay without damaging product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to our work. We call into our team only professionals, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are affirmed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been delivered, and this number is ascending every day. We are happy that customers choose FAMAGA again and again, and we strive to make more developed and technologically modern industrial equipment so as not to lower the bar.
To get some advice or make a request, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQS | TB (Round) | JPQS | TA (Round) TD (Diamond) | FPQS | TA (Round) TD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPQS | GFPQS | ||||
EN 1.4301 Equiv.* | - | - | - | SJPQS | SFPQS | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | CJPQS | CFPQS |
Part Number | - | P | - | L | - | B |
JPQSTA6 | - | 4.00 | ||||
FPQSTA6 | - | P4.00 | - | L10 | - | B5.5 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque Ncm | |||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||
JPQS | TB (Round) | 6 | -0.004 -0.012 | 4 | 5 | 10 | 5 | M3 | 147 | 5 | ||||
8 | -0.005 -0.014 | 6 | 7 | 15 | 6 | M5 | 676 | 8 | ||||||
10 | -0.006 -0.017 | 7 | 8 | 8 | ||||||||||
13 | 8 | 10 | 22 | M8 | 2803 | 12 | ||||||||
16 | 10 | 10 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque Ncm | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQS GJPQS SJPQS CJPQS | TA (Round) TD (Diamond) | 5 | -0.004 -0.012 | 3.00~5.00 | 10 | 5 | M2 | - | 3 | 1.2 |
6 | 4.00~6.00 | M3 | 147 | 5 | 1.5 | |||||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | 6.00~8.00 | 15 | 6 | M5 | 676 | 8 | 1.8 | ||
8T | M4 | 333 | 6 | |||||||
10 | -0.006 -0.017 | 7.00~10.00 | 8 | M5 | 676 | 8 | 2.2 | |||
12 | 7.00~12.00 | 2.5 | ||||||||
13 | 8.00~13.00 | 22 | M8 | 2803 | 12 | 3 | ||||
16 | 10.00~16.00 | 10 | 4 | |||||||
20 | -0.007 -0.020 | 13.00~20.00 | 30 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque Ncm | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQS GFPQS SFPQS CFPQS | TA (Round) TD (Diamond) | 5 | -0.004 -0.012 | 3.00~5.00 | 8~10 | 2.0~10.0 | M2 | - | 3 | 1.2 |
6 | 4.00~6.00 | 8(9)~12 | 2.0~12.0 | M3 | 147 | 5 | 1.5 | |||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | 6.00~8.00 | 11(12)~16 | 2.0~15.0 | M5 | 676 | 8 | 1.8 | ||
8T | M4 | 333 | 6 | |||||||
10 | 7.00~10.00 | 11(12)~20 | 3.0~20.0 | M5 | 676 | 8 | 2.2 | |||
10T | 8(12)~16 | M4 | 333 | 6 | ||||||
12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | M5 | 676 | 8 | 2.5 | |||
12T | 8(12)~18 | M4 | 333 | 6 | ||||||
13 | 8.00~13.00 | 13(14)~26 | 5.0~20.0 | M8 | 2803 | 10 | 3 | |||
13T | 10(14)~20 | M6 | 1156 | 9 | ||||||
16 | 10.00~16.00 | 16~32 | M8 | 2803 | 12 | 4 | ||||
16T | 10(14)~24 | M6 | 1156 | 9 | ||||||
20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | M8 | 2803 | 12 | 5 | |||
20T | 12(18)~30 | M6 | 1156 | 9 |