We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
GFPQSTA12-P[7-12/0.01]-L[12-24/1]-B[3-20/0.1]
Description
Spherical Small Head/Tapped/P Configurable
Stock availability:
On request
If you are pursuing MISUMI GFPQSTA12-P[7-12/0.01]-L[12-24/1]-B[3-20/0.1], catch up with FAMAGA, the world's primary vendor of manufacturing equipment. Our company has operated for more than ten years - these are years of experience, which are described in the quality of merchandises and special attention to each orderer. We esteem everyone, who joined with us - hence, our regular consumers get the most helpful purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such purchasers, and we constantly form new agreements. More than 700 affairs are settled per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Malawi, Montenegro, Slovakia, Macedonia, Latvia, Argentina, Sudan, Austria, Belgium, Thailand, Canada, Syria, Czech Republic, Uganda, India, Mexico, Tanzania, Chile, Gambia, Philippines, Panama, Jordan, Andorra, Moldova, Chad, Rwanda, Kenya, Bolivia, Niger, Bulgaria, Tajikistan, Denmark, Finland, Israel, Kazakhstan, Ghana, Poland, Haiti, Iceland, Guatemala, Greece, Antigua and Barbuda, Mongolia, Estonia, Central African Republic, Georgia. A well-shaped logistics connection and a partnership network assist us to deliver our units anywhere in the planet with no delay without compromising product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the range of industrial equipment.
All spare parts from FAMAGA are assured - we are responsible for the cause of our work. Now, more than 10 million units of products have been provided, and this quantity is rising every day. We are pleased that buyers choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To get some advice or book, contact us or write a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQS | TB (Round) | JPQS | TA (Round) TD (Diamond) | FPQS | TA (Round) TD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPQS | GFPQS | ||||
EN 1.4301 Equiv.* | - | - | - | SJPQS | SFPQS | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | CJPQS | CFPQS |
Part Number | - | P | - | L | - | B |
JPQSTA6 | - | 4.00 | ||||
FPQSTA6 | - | P4.00 | - | L10 | - | B5.5 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque Ncm | |||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||
JPQS | TB (Round) | 6 | -0.004 -0.012 | 4 | 5 | 10 | 5 | M3 | 147 | 5 | ||||
8 | -0.005 -0.014 | 6 | 7 | 15 | 6 | M5 | 676 | 8 | ||||||
10 | -0.006 -0.017 | 7 | 8 | 8 | ||||||||||
13 | 8 | 10 | 22 | M8 | 2803 | 12 | ||||||||
16 | 10 | 10 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque Ncm | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQS GJPQS SJPQS CJPQS | TA (Round) TD (Diamond) | 5 | -0.004 -0.012 | 3.00~5.00 | 10 | 5 | M2 | - | 3 | 1.2 |
6 | 4.00~6.00 | M3 | 147 | 5 | 1.5 | |||||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | 6.00~8.00 | 15 | 6 | M5 | 676 | 8 | 1.8 | ||
8T | M4 | 333 | 6 | |||||||
10 | -0.006 -0.017 | 7.00~10.00 | 8 | M5 | 676 | 8 | 2.2 | |||
12 | 7.00~12.00 | 2.5 | ||||||||
13 | 8.00~13.00 | 22 | M8 | 2803 | 12 | 3 | ||||
16 | 10.00~16.00 | 10 | 4 | |||||||
20 | -0.007 -0.020 | 13.00~20.00 | 30 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque Ncm | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQS GFPQS SFPQS CFPQS | TA (Round) TD (Diamond) | 5 | -0.004 -0.012 | 3.00~5.00 | 8~10 | 2.0~10.0 | M2 | - | 3 | 1.2 |
6 | 4.00~6.00 | 8(9)~12 | 2.0~12.0 | M3 | 147 | 5 | 1.5 | |||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | 6.00~8.00 | 11(12)~16 | 2.0~15.0 | M5 | 676 | 8 | 1.8 | ||
8T | M4 | 333 | 6 | |||||||
10 | 7.00~10.00 | 11(12)~20 | 3.0~20.0 | M5 | 676 | 8 | 2.2 | |||
10T | 8(12)~16 | M4 | 333 | 6 | ||||||
12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | M5 | 676 | 8 | 2.5 | |||
12T | 8(12)~18 | M4 | 333 | 6 | ||||||
13 | 8.00~13.00 | 13(14)~26 | 5.0~20.0 | M8 | 2803 | 10 | 3 | |||
13T | 10(14)~20 | M6 | 1156 | 9 | ||||||
16 | 10.00~16.00 | 16~32 | M8 | 2803 | 12 | 4 | ||||
16T | 10(14)~24 | M6 | 1156 | 9 | ||||||
20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | M8 | 2803 | 12 | 5 | |||
20T | 12(18)~30 | M6 | 1156 | 9 |