We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting MISUMI FPQSTD8, get in touch with FAMAGA, the world's key supplier of industrialized equipment. Our company has lasted for more than ten years - these are years of experience, which are illustrated in the quality of outputs and special attention to each buyer. We respect everyone, who collaborated with us - so, our regular buyers obtain the most favorable purchase terms and discounts on the machine made streamlined equipment market. At present, there are more than 3500 such clients, and we constantly sign new agreements. More than 700 proceedings are resolved per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Chad, Senegal, Hungary, India, Indonesia, Brazil, Algeria, Ghana, Burma, Australia, Singapore, Mauritius, Paraguay, Sudan, Nigeria, Latvia, Kenya, Israel, Malaysia, Vietnam, Tunisia, Eswatini, Niger, Gambia, Czech Republic, Macedonia, Djibouti, Chile, Turkey, Turkmenistan, Tanzania, Pakistan, Kyrgyzstan, Montenegro, Bulgaria, Seychelles, Tajikistan, Laos, Mauritania, Namibia, Cameroon, Zambia, Serbia, Bangladesh, Philippines. A well-elaborated logistics bond and a partnership network allow us to dispatch our units anywhere in the planet promptly without undermining product quality.
A particular source of repute for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only experts, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been provided, and this bulk is amounting every day. We are pleased that customers choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To get some advice or book, phone us or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQS | TB (Round) | JPQS | TA (Round) TD (Diamond) | FPQS | TA (Round) TD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPQS | GFPQS | ||||
EN 1.4301 Equiv.* | - | - | - | SJPQS | SFPQS | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | CJPQS | CFPQS |
Part Number | - | P | - | L | - | B |
JPQSTA6 | - | 4.00 | ||||
FPQSTA6 | - | P4.00 | - | L10 | - | B5.5 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque Ncm | |||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||
JPQS | TB (Round) | 6 | -0.004 -0.012 | 4 | 5 | 10 | 5 | M3 | 147 | 5 | ||||
8 | -0.005 -0.014 | 6 | 7 | 15 | 6 | M5 | 676 | 8 | ||||||
10 | -0.006 -0.017 | 7 | 8 | 8 | ||||||||||
13 | 8 | 10 | 22 | M8 | 2803 | 12 | ||||||||
16 | 10 | 10 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque Ncm | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQS GJPQS SJPQS CJPQS | TA (Round) TD (Diamond) | 5 | -0.004 -0.012 | 3.00~5.00 | 10 | 5 | M2 | - | 3 | 1.2 |
6 | 4.00~6.00 | M3 | 147 | 5 | 1.5 | |||||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | 6.00~8.00 | 15 | 6 | M5 | 676 | 8 | 1.8 | ||
8T | M4 | 333 | 6 | |||||||
10 | -0.006 -0.017 | 7.00~10.00 | 8 | M5 | 676 | 8 | 2.2 | |||
12 | 7.00~12.00 | 2.5 | ||||||||
13 | 8.00~13.00 | 22 | M8 | 2803 | 12 | 3 | ||||
16 | 10.00~16.00 | 10 | 4 | |||||||
20 | -0.007 -0.020 | 13.00~20.00 | 30 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque Ncm | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQS GFPQS SFPQS CFPQS | TA (Round) TD (Diamond) | 5 | -0.004 -0.012 | 3.00~5.00 | 8~10 | 2.0~10.0 | M2 | - | 3 | 1.2 |
6 | 4.00~6.00 | 8(9)~12 | 2.0~12.0 | M3 | 147 | 5 | 1.5 | |||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | 6.00~8.00 | 11(12)~16 | 2.0~15.0 | M5 | 676 | 8 | 1.8 | ||
8T | M4 | 333 | 6 | |||||||
10 | 7.00~10.00 | 11(12)~20 | 3.0~20.0 | M5 | 676 | 8 | 2.2 | |||
10T | 8(12)~16 | M4 | 333 | 6 | ||||||
12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | M5 | 676 | 8 | 2.5 | |||
12T | 8(12)~18 | M4 | 333 | 6 | ||||||
13 | 8.00~13.00 | 13(14)~26 | 5.0~20.0 | M8 | 2803 | 10 | 3 | |||
13T | 10(14)~20 | M6 | 1156 | 9 | ||||||
16 | 10.00~16.00 | 16~32 | M8 | 2803 | 12 | 4 | ||||
16T | 10(14)~24 | M6 | 1156 | 9 | ||||||
20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | M8 | 2803 | 12 | 5 | |||
20T | 12(18)~30 | M6 | 1156 | 9 |