We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for MISUMI FPQSTD13, reach FAMAGA, the world's chief retailer of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are portrayed in the quality of products and special attention to each customer. We appreciate everyone, who liased with us - therefore, our regular consumers receive the most attractive purchase forms and discounts on the machine made streamlined equipment market. Today, there are more than 4000 such purchasers, and we constantly arrange new agreements. More than 600 proceedings are resolved per day, because FAMAGA operates all over the world Germany, United Kingdom, Nicaragua, Morocco, Seychelles, Peru, Iran, Burkina Faso, Portugal, Swaziland, Eritrea, Syria, Liberia, Bosnia and Herzegovina, Indonesia, Tajikistan, Finland, Turkey, Cape Verde, Comoros, Tanzania, Kiribati, Qatar, Togo, South Korea, South Sudan, Latvia, Luxembourg, Iceland, Mozambique, Suriname, El Salvador, Djibouti, Brazil, Afghanistan, Kuwait, Nepal, Ghana, The Gambia, Botswana, Kyrgyzstan, Egypt, Cyprus, Benin, Greece, Zimbabwe, Denmark. A well-developed logistics series and a partnership network assist us to send our units anywhere in the globe on-time without damaging product quality.
A special source of repute for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only experts, who already have experience in the field of machine made streamlined equipment.
All products from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that buyers choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To get some advice or make a request, phone us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQS | TB (Round) | JPQS | TA (Round) TD (Diamond) | FPQS | TA (Round) TD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPQS | GFPQS | ||||
EN 1.4301 Equiv.* | - | - | - | SJPQS | SFPQS | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | CJPQS | CFPQS |
Part Number | - | P | - | L | - | B |
JPQSTA6 | - | 4.00 | ||||
FPQSTA6 | - | P4.00 | - | L10 | - | B5.5 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque Ncm | |||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||
JPQS | TB (Round) | 6 | -0.004 -0.012 | 4 | 5 | 10 | 5 | M3 | 147 | 5 | ||||
8 | -0.005 -0.014 | 6 | 7 | 15 | 6 | M5 | 676 | 8 | ||||||
10 | -0.006 -0.017 | 7 | 8 | 8 | ||||||||||
13 | 8 | 10 | 22 | M8 | 2803 | 12 | ||||||||
16 | 10 | 10 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque Ncm | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQS GJPQS SJPQS CJPQS | TA (Round) TD (Diamond) | 5 | -0.004 -0.012 | 3.00~5.00 | 10 | 5 | M2 | - | 3 | 1.2 |
6 | 4.00~6.00 | M3 | 147 | 5 | 1.5 | |||||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | 6.00~8.00 | 15 | 6 | M5 | 676 | 8 | 1.8 | ||
8T | M4 | 333 | 6 | |||||||
10 | -0.006 -0.017 | 7.00~10.00 | 8 | M5 | 676 | 8 | 2.2 | |||
12 | 7.00~12.00 | 2.5 | ||||||||
13 | 8.00~13.00 | 22 | M8 | 2803 | 12 | 3 | ||||
16 | 10.00~16.00 | 10 | 4 | |||||||
20 | -0.007 -0.020 | 13.00~20.00 | 30 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque Ncm | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQS GFPQS SFPQS CFPQS | TA (Round) TD (Diamond) | 5 | -0.004 -0.012 | 3.00~5.00 | 8~10 | 2.0~10.0 | M2 | - | 3 | 1.2 |
6 | 4.00~6.00 | 8(9)~12 | 2.0~12.0 | M3 | 147 | 5 | 1.5 | |||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | 6.00~8.00 | 11(12)~16 | 2.0~15.0 | M5 | 676 | 8 | 1.8 | ||
8T | M4 | 333 | 6 | |||||||
10 | 7.00~10.00 | 11(12)~20 | 3.0~20.0 | M5 | 676 | 8 | 2.2 | |||
10T | 8(12)~16 | M4 | 333 | 6 | ||||||
12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | M5 | 676 | 8 | 2.5 | |||
12T | 8(12)~18 | M4 | 333 | 6 | ||||||
13 | 8.00~13.00 | 13(14)~26 | 5.0~20.0 | M8 | 2803 | 10 | 3 | |||
13T | 10(14)~20 | M6 | 1156 | 9 | ||||||
16 | 10.00~16.00 | 16~32 | M8 | 2803 | 12 | 4 | ||||
16T | 10(14)~24 | M6 | 1156 | 9 | ||||||
20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | M8 | 2803 | 12 | 5 | |||
20T | 12(18)~30 | M6 | 1156 | 9 |