We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FPQSTA8-P[6-8/0.01]-L[11-16/1]-B[2-15/0.1]
Description
Spherical Small Head/Tapped/P Configurable
Stock availability:
On request
If you are inspecting MISUMI FPQSTA8-P[6-8/0.01]-L[11-16/1]-B[2-15/0.1], communicate with FAMAGA, the world's top supplier of industrialized equipment. Our company has functioned for more than ten years - these are ages of experience, which are expressed in the quality of items and individual attention to each user. We appreciate everyone, who collaborated with us - so, our regular consumers bring in the most flexible purchase forms and discounts on the industrial equipment market. At present, there are more than 4 thousand such clients, and we constantly form new agreements. More than 650 transactions are made per day, because FAMAGA works all over the planet Germany, United Kingdom, Russia, Dominica, Afghanistan, Samoa, Uruguay, Mozambique, Myanmar, Morocco, Monaco, Costa Rica, Turkmenistan, Slovenia, Swaziland, Honduras, Botswana, Australia, Serbia, Latvia, Ukraine, Nigeria, United Arab Emirates, Cape Verde, Seychelles, Angola, Brunei, Albania, Zambia, Mexico, Syria, Estonia, Chile, Indonesia, Suriname, Sweden, Senegal, Philippines, Ireland, Paraguay, Burkina Faso, Vietnam, Guatemala, Argentina, Georgia, Norway. A well-built logistics system and a partnership network help us to conduct our elements anywhere in the globe with no delay without damaging product quality.
A specific source of honor for FAMAGA is its team members, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the direction of industrial equipment.
All products from FAMAGA are affirmed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this amount is amounting every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically innovative industrial equipment so as stay in control.
To get some advice or place an order, get in touch with us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQS | TB (Round) | JPQS | TA (Round) TD (Diamond) | FPQS | TA (Round) TD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPQS | GFPQS | ||||
EN 1.4301 Equiv.* | - | - | - | SJPQS | SFPQS | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | CJPQS | CFPQS |
Part Number | - | P | - | L | - | B |
JPQSTA6 | - | 4.00 | ||||
FPQSTA6 | - | P4.00 | - | L10 | - | B5.5 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque Ncm | |||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||
JPQS | TB (Round) | 6 | -0.004 -0.012 | 4 | 5 | 10 | 5 | M3 | 147 | 5 | ||||
8 | -0.005 -0.014 | 6 | 7 | 15 | 6 | M5 | 676 | 8 | ||||||
10 | -0.006 -0.017 | 7 | 8 | 8 | ||||||||||
13 | 8 | 10 | 22 | M8 | 2803 | 12 | ||||||||
16 | 10 | 10 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque Ncm | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQS GJPQS SJPQS CJPQS | TA (Round) TD (Diamond) | 5 | -0.004 -0.012 | 3.00~5.00 | 10 | 5 | M2 | - | 3 | 1.2 |
6 | 4.00~6.00 | M3 | 147 | 5 | 1.5 | |||||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | 6.00~8.00 | 15 | 6 | M5 | 676 | 8 | 1.8 | ||
8T | M4 | 333 | 6 | |||||||
10 | -0.006 -0.017 | 7.00~10.00 | 8 | M5 | 676 | 8 | 2.2 | |||
12 | 7.00~12.00 | 2.5 | ||||||||
13 | 8.00~13.00 | 22 | M8 | 2803 | 12 | 3 | ||||
16 | 10.00~16.00 | 10 | 4 | |||||||
20 | -0.007 -0.020 | 13.00~20.00 | 30 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque Ncm | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQS GFPQS SFPQS CFPQS | TA (Round) TD (Diamond) | 5 | -0.004 -0.012 | 3.00~5.00 | 8~10 | 2.0~10.0 | M2 | - | 3 | 1.2 |
6 | 4.00~6.00 | 8(9)~12 | 2.0~12.0 | M3 | 147 | 5 | 1.5 | |||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | 6.00~8.00 | 11(12)~16 | 2.0~15.0 | M5 | 676 | 8 | 1.8 | ||
8T | M4 | 333 | 6 | |||||||
10 | 7.00~10.00 | 11(12)~20 | 3.0~20.0 | M5 | 676 | 8 | 2.2 | |||
10T | 8(12)~16 | M4 | 333 | 6 | ||||||
12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | M5 | 676 | 8 | 2.5 | |||
12T | 8(12)~18 | M4 | 333 | 6 | ||||||
13 | 8.00~13.00 | 13(14)~26 | 5.0~20.0 | M8 | 2803 | 10 | 3 | |||
13T | 10(14)~20 | M6 | 1156 | 9 | ||||||
16 | 10.00~16.00 | 16~32 | M8 | 2803 | 12 | 4 | ||||
16T | 10(14)~24 | M6 | 1156 | 9 | ||||||
20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | M8 | 2803 | 12 | 5 | |||
20T | 12(18)~30 | M6 | 1156 | 9 |