We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
GJPQA4-[4-7/0.01]
Description
Spherical Large Head/Standard/P Configurable
Stock availability:
On request
If you are seeking MISUMI GJPQA4-[4-7/0.01], communicate with FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of outputs and private attention to each buyer. We appreciate everyone, who liased with us - so, our regular consumers get the most favorable purchase conditions and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4000 such consumers, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA works all over the earth Germany, United Kingdom, Uganda, Bolivia, Finland, Guyana, Ukraine, The Bahamas, Luxembourg, Philippines, Hungary, Peru, Slovenia, Malawi, Bahamas, Ireland, Egypt, Dominica, Monaco, Mexico, Oman, Belarus, Paraguay, Russia, Iran, Latvia, Georgia, Togo, Jordan, Fiji, El Salvador, Cyprus, Laos, Mauritius, Qatar, Samoa, Thailand, Swaziland, Burkina Faso, Tanzania, Suriname, Kuwait, Argentina, Nepal, Botswana, Seychelles. A well-developed logistics network and a partnership network cheer us to ship our units anywhere in the earth promptly without undermining product quality.
A special source of honor for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the field of industrial equipment.
All goods from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this number is rising every day. We are glad that clients choose FAMAGA again and again, and we are pleased to make more progressive and technologically innovative industrial equipment so as to stay on the top.
To request or place an order, get in touch with us or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | D Tolerance and Shape | Type | D Tolerance and Shape | Type | D Tolerance and Shape | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQ | B (m6) PB (p6) | JPQ | A (m6) PA (p6) D (m6) PD (p6) | FPQ | A (m6) PA (p6) D (m6) PD (p6) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQ | GFPQ | ||||
EN 1.4301 Equiv.* | - | - | SJPQ | SJPQ | SFPQ | ||||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | HJPQ (Round only) | HFPQ | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQ | CJPQ | CFPQ | ||||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | MJPQ | MFPQ | ||||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffing | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQ | ||||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | MCJPQ | MCFPQ |
Part Number | P | L | B | |||||||
- | - | - | ||||||||
Type | D Tol. Shape | D | ||||||||
JPQ FPQ MFPQ | A A PA | 4 4 12 | - - - | 5.00 P5.00 P15.98 | - - | L5 L12 | - - | B2.5 B5.5 |
Part Number | P Selection | L | B | C | ||||||||||||||||
Type | D Tolerance and Shape | D | D Tol. | |||||||||||||||||
m6 | p6 | |||||||||||||||||||
JPQ SJPQ CJPQ | B (m6) PB (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 2 | 3 | 3 | 0.1 | 0 | |||||||||||
2 | 3 | 4 | 4 | 0.5 | ||||||||||||||||
3 | 4 | 5 | 6 | 5 | 5 | 1 | ||||||||||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 5 | 6 | 7 | 6 | 1 | |||||||||||||
5 | 6 | 7 | 8 | 10 | ||||||||||||||||
6 | 7 | 8 | 9 | 10 | 8 | |||||||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9 | 10 | 11 | 12 | 15 | 1.5 | ||||||||||||
10 | 12 | 13 | 10 | 2 |
Part Number | P 0.01mm Increment | L | B | C | (W) | |||||
Type | D Tolerance and Shape | D | D Tol. | |||||||
m6 | p6 | |||||||||
JPQ GJPQ SJPQ HJPQ CJPQ (Buff Finished) MJPQ MCJPQ Applicable when D≥5. | A (m6) PA (p6) D (m6) PD (p6) Applicable when D≥2 | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.50 | 3 | 3 | 0.1 | 0 | - |
2 | 2.50~4.00 | 4 | 0.5 | 1.2 | ||||||
3 | 3.50~6.00 | 5 | 5 | 1 | 1.5 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | 6 | 1 | 1.8 | ||||
5 | 5.50~8.00 | 10 | 2.2 | |||||||
6 | 6.50~10.00 | 8 | 3.0 | |||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 15 | 1.5 | 3.5 | ||||
10 | 11.00~15.00 | 10 | 2 | 4.0 | ||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 5.0 | ||||||
13 | 14.00~18.00 | 22 | 2 | 5.5 | ||||||
16 | 17.00~25.00 | 3 | 7.0 | |||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 30 | 15 | 9.0 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | (W) | |||||
Type | D Tolerance and Shape | D | D Tol. | |||||||
m6 | p6 | |||||||||
FPQ GFPQ SFPQ HFPQ CFPQ (Buff Finished) MFPQ MGFPQ MCFPQ Applicable when D≥5. | A (m6) PA (p6) D (m6) PD (p6) Applicable when D≥2 | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.50 | 2, 3 | 2.0~5.0 | 0.1 | 0 | - |
2 | 2.50~4.00 | 2~6 | 2.0~10.0 | 0.5 | 1.2 | |||||
3 | 3.50~6.00 | 3~6 | 2.0~10.0 | 1 | 1.5 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | 4~8 | 2.0~10.0 | 1 | 1.8 | |||
5 | 5.50~8.00 | 5~10 | 2.0~10.0 | 2.2 | ||||||
6 | 6.50~10.00 | 6~12 | 2.0~12.0 | 3.0 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 8~16 | 2.0~15.0 | 1.5 | 3.5 | |||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | 2 | 4.0 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 12~24 | 3.0~20.0 | 5.0 | ||||
13 | 14.00~18.00 | 13~26 | 5.0~20.0 | 2 | 5.5 | |||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 3 | 7.0 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 20~40 | 5.0~20.0 | 9.0 |