We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
CFPQA3-P[3.5-6/0.01]-L[3-6/1]-B[2-10/0.1]
Description
Spherical Large Head/Standard/P Configurable
Stock availability:
On request
If you are questing MISUMI CFPQA3-P[3.5-6/0.01]-L[3-6/1]-B[2-10/0.1], catch up with FAMAGA, the world's dominant provider of mechanized equipment. Our company has progressed for more than ten years - these are ages of experience, which are described in the quality of outputs and individual attention to each user. We understand everyone, who collaborated with us - hence, our regular customers pick up the most helpful purchase terms and discounts on the factory-made equipment market. At present, there are more than 4500 such buyers, and we constantly arrange new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Eritrea, Nepal, Swaziland, Italy, New Zealand, Bolivia, Palestine, Burma, Denmark, Argentina, Ecuador, Finland, Belize, Burundi, Greece, Azerbaijan, Chad, Croatia, China, Tanzania, Eswatini, Algeria, Bulgaria, Indonesia, Uganda, El Salvador, India, Bangladesh, North Korea, Egypt, Rwanda, Chile, Russia, Namibia, Austria, Libya, Luxembourg, Kazakhstan, Ghana, Mongolia, Hungary. A well-developed logistics bond and a partnership network allow us to send our goods anywhere in the globe quickly without damaging product quality.
A specific source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the direction of factory-made equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the cause of our work. Now, more than 10 million units of products have been provided, and this quantity is increasing every day. We are pleased that clients choose FAMAGA again and again, and we are glad to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To consult or book, contact us or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | D Tolerance and Shape | Type | D Tolerance and Shape | Type | D Tolerance and Shape | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQ | B (m6) PB (p6) | JPQ | A (m6) PA (p6) D (m6) PD (p6) | FPQ | A (m6) PA (p6) D (m6) PD (p6) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQ | GFPQ | ||||
EN 1.4301 Equiv.* | - | - | SJPQ | SJPQ | SFPQ | ||||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | HJPQ (Round only) | HFPQ | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQ | CJPQ | CFPQ | ||||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | MJPQ | MFPQ | ||||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffing | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQ | ||||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | MCJPQ | MCFPQ |
Part Number | P | L | B | |||||||
- | - | - | ||||||||
Type | D Tol. Shape | D | ||||||||
JPQ FPQ MFPQ | A A PA | 4 4 12 | - - - | 5.00 P5.00 P15.98 | - - | L5 L12 | - - | B2.5 B5.5 |
Part Number | P Selection | L | B | C | ||||||||||||||||
Type | D Tolerance and Shape | D | D Tol. | |||||||||||||||||
m6 | p6 | |||||||||||||||||||
JPQ SJPQ CJPQ | B (m6) PB (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 2 | 3 | 3 | 0.1 | 0 | |||||||||||
2 | 3 | 4 | 4 | 0.5 | ||||||||||||||||
3 | 4 | 5 | 6 | 5 | 5 | 1 | ||||||||||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 5 | 6 | 7 | 6 | 1 | |||||||||||||
5 | 6 | 7 | 8 | 10 | ||||||||||||||||
6 | 7 | 8 | 9 | 10 | 8 | |||||||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9 | 10 | 11 | 12 | 15 | 1.5 | ||||||||||||
10 | 12 | 13 | 10 | 2 |
Part Number | P 0.01mm Increment | L | B | C | (W) | |||||
Type | D Tolerance and Shape | D | D Tol. | |||||||
m6 | p6 | |||||||||
JPQ GJPQ SJPQ HJPQ CJPQ (Buff Finished) MJPQ MCJPQ Applicable when D≥5. | A (m6) PA (p6) D (m6) PD (p6) Applicable when D≥2 | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.50 | 3 | 3 | 0.1 | 0 | - |
2 | 2.50~4.00 | 4 | 0.5 | 1.2 | ||||||
3 | 3.50~6.00 | 5 | 5 | 1 | 1.5 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | 6 | 1 | 1.8 | ||||
5 | 5.50~8.00 | 10 | 2.2 | |||||||
6 | 6.50~10.00 | 8 | 3.0 | |||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 15 | 1.5 | 3.5 | ||||
10 | 11.00~15.00 | 10 | 2 | 4.0 | ||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 5.0 | ||||||
13 | 14.00~18.00 | 22 | 2 | 5.5 | ||||||
16 | 17.00~25.00 | 3 | 7.0 | |||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 30 | 15 | 9.0 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | (W) | |||||
Type | D Tolerance and Shape | D | D Tol. | |||||||
m6 | p6 | |||||||||
FPQ GFPQ SFPQ HFPQ CFPQ (Buff Finished) MFPQ MGFPQ MCFPQ Applicable when D≥5. | A (m6) PA (p6) D (m6) PD (p6) Applicable when D≥2 | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.50 | 2, 3 | 2.0~5.0 | 0.1 | 0 | - |
2 | 2.50~4.00 | 2~6 | 2.0~10.0 | 0.5 | 1.2 | |||||
3 | 3.50~6.00 | 3~6 | 2.0~10.0 | 1 | 1.5 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | 4~8 | 2.0~10.0 | 1 | 1.8 | |||
5 | 5.50~8.00 | 5~10 | 2.0~10.0 | 2.2 | ||||||
6 | 6.50~10.00 | 6~12 | 2.0~12.0 | 3.0 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 8~16 | 2.0~15.0 | 1.5 | 3.5 | |||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | 2 | 4.0 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 12~24 | 3.0~20.0 | 5.0 | ||||
13 | 14.00~18.00 | 13~26 | 5.0~20.0 | 2 | 5.5 | |||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 3 | 7.0 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 20~40 | 5.0~20.0 | 9.0 |