We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
HJPQSPD20-[1-2/0.01]
Description
Spherical Small Head/Standard/P Configurable
Stock availability:
On request
If you are seeking MISUMI HJPQSPD20-[1-2/0.01], catch up with FAMAGA, the world's primary vendor of manufacturing equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of merchandises and private attention to each orderer. We admire everyone, who joined with us - hence, our regular consumers pick up the most convenient purchase conditions and discounts on the industrial equipment market. Today, there are more than 3500 such customers, and we constantly form new agreements. More than 750 transactions are made per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Benin, Grenada, Japan, Belize, Burma, Djibouti, Suriname, Iceland, Turkey, Rwanda, Lebanon, Kyrgyzstan, Czech Republic, Bhutan, Israel, Moldova, Madagascar, Tunisia, Syria, Iran, Tanzania, Thailand, Greece, Kenya, Zambia, Mozambique, Bangladesh, Mali, Montenegro, Cameroon, Denmark, Malaysia, Poland, Antigua and Barbuda, China, Macedonia, Costa Rica, Nigeria, Serbia, Iraq, Switzerland. A well-elaborated logistics bond and a partnership network allow us to conduct our products anywhere in the earth immediately without damaging product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only experts, who already have experience in the direction of machine made streamlined equipment.
All outputs from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this number is ascending every day. We are pleased that buyers choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as stay in control.
To consult or book, phone us or write to the online chat on our site. You can also direct a list of the needful equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | D Tolerance and Shape | Type | D Tolerance and Shape | Type | D Tolerance and Shape | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQ | SB (m6) SPB (p6) | JPQ | SA (m6) SPA (p6) SD (m6) SPD (p6) | FPQ | SA (m6) SPA (p6) SD (m6) SPD (p6) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQ (Round only) | GFPQ | ||||
EN 1.4301 Equiv.* | - | - | SJPQ | SJPQ | SFPQ | ||||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQ | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | CJPQ | CFPQ | ||||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | MJPQ | MFPQ |
Part Number | - | P | - | L | - | B | ||||
Type | Shape | D | ||||||||
JPQ | SA | 4 | - | 2.01 | ||||||
FPQ | SA | 4 | - | P2.01 | - | L6 | - | B5.5 |
Part Number | P Selection | L | B | C | ||||||||||
Type | D Tolerance and Shape | D | D dim. Tolerance | |||||||||||
m6 | p6 | |||||||||||||
JPQ SJPQ | SB (m6) SPB (p6) | 2 | +0.008 +0.002 | +0.012 +0.006 | 1 | 1.5 | 4 | 2 | 0.3 | 0 | ||||
3 | 2 | 5 | 3 | 0.5 | 1 | |||||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2 | 3 | 1 | |||||||||
5 | 2 | 3 | 4 | 10 | 5 | |||||||||
6 | 2 | 3 | 4 | 5 |
Part Number | P 0.01mm Increment | L | B | C | (W) | |||||
Type | D Tolerance and Shape | D | D dim. Tolerance | |||||||
m6 | p6 | |||||||||
JPQ GJPQ SJPQ CJPQ (Buff Finished) MJPQ Applicable when D5 and P5. | SA (m6) SPA (p6) SD (m6) SPD (p6) Applicable when D4. | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.00~2.00 | 4 | 2 | 0.3 | 0 | - |
3 | 1.00~3.00 | 5 | 3 | 0.5 | 1 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2.00~4.00 | 1 | 1.0 | |||||
5 | 2.00~5.00 | 10 | 5 | 1.2 | ||||||
6 | 2.00~6.00 | 1.5 | ||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 15 | 6 | 1.5 | 2 | 1.8 | ||
10 | 3.00~10.00 | 8 | 2 | 2.2 | ||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 2.5 | ||||||
13 | 6.00~13.00 | 22 | 3 | |||||||
16 | 10.00~16.00 | 10 | 3 | 4 | ||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 30 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | (W) | |||||
Type | D Tolerance and Shape | D | D dim. Tolerance | |||||||
m6 | p6 | |||||||||
FPQ GFPQ SFPQ HFPQ CFPQ (Buff Finished) MFPQ Applicable when D5 and P5. | SA (m6) SPA (p6) SD (m6) SPD (p6) Applicable when D4. | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.00~2.00 | 2~4 | 2.0~10.0 | 0.3 | 0 | - |
3 | 1.00~3.00 | 3~6 | 2.0~10.0 | 0.5 | 1 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2.00~4.00 | 4~8 | 2.0~10.0 | 1 | 1.0 | |||
5 | 2.00~5.00 | 5~10 | 2.0~10.0 | 1.2 | ||||||
6 | 2.00~6.00 | 6~12 | 2.0~12.0 | 1.5 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 8~16 | 2.0~15.0 | 1.5 | 2 | 1.8 | ||
10 | 3.00~10.00 | 10~20 | 3.0~20.0 | 2 | 2.2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 12~24 | 3.0~20.0 | 2.5 | ||||
13 | 6.00~13.00 | 13~26 | 5.0~20.0 | 3 | ||||||
16 | 10.00~16.00 | 16~32 | 5.0~20.0 | 3 | 4 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 20~40 | 5.0~20.0 | 5 |