We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
HJPQSPA13-[1-2/0.01]
Description
Spherical Small Head/Standard/P Configurable
Stock availability:
On request
If you are pursuing MISUMI HJPQSPA13-[1-2/0.01], reach FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are years of experience, which are depicted in the quality of spare parts and special attention to each buyer. We value everyone, who liased with us - so, our regular buyers get the most acceptable purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4000 such clients, and we constantly compose new agreements. More than 650 purchases are terminated per day, because FAMAGA operates all over the world Germany, United Kingdom, Hungary, Guyana, Italy, Ecuador, Dominican Republic, Japan, Laos, Belgium, Algeria, Botswana, Canada, Dominica, Latvia, Netherlands, Madagascar, Indonesia, Afghanistan, South Korea, Australia, Panama, Bosnia and Herzegovina, East Timor, Gambia, Cape Verde, Syria, Egypt, Luxembourg, Ireland, Montenegro, The Bahamas, Mauritania, Morocco, El Salvador, United Arab Emirates, Djibouti, Kenya, The Gambia, Ghana, Cyprus, Zambia, Peru, Georgia, Pakistan, Namibia, Croatia, Nigeria. A advanced logistics chains and a partnership network assist us to ship our elements anywhere in the earth immediately without disreputing product quality.
A particular source of pride for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only specialists, who already have experience in the field of manufacturing equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been provided, and this amount is rising every day. We are pleased that purchasers choose FAMAGA again and again, and we are pleased to make more progressive and technologically developed industrial equipment so as to stay on the top.
To inquire or place an order, call us by phone or write to the online chat on our site. You can also dispatch a list of the needful equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | D Tolerance and Shape | Type | D Tolerance and Shape | Type | D Tolerance and Shape | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQ | SB (m6) SPB (p6) | JPQ | SA (m6) SPA (p6) SD (m6) SPD (p6) | FPQ | SA (m6) SPA (p6) SD (m6) SPD (p6) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQ (Round only) | GFPQ | ||||
EN 1.4301 Equiv.* | - | - | SJPQ | SJPQ | SFPQ | ||||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQ | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | CJPQ | CFPQ | ||||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | MJPQ | MFPQ |
Part Number | - | P | - | L | - | B | ||||
Type | Shape | D | ||||||||
JPQ | SA | 4 | - | 2.01 | ||||||
FPQ | SA | 4 | - | P2.01 | - | L6 | - | B5.5 |
Part Number | P Selection | L | B | C | ||||||||||
Type | D Tolerance and Shape | D | D dim. Tolerance | |||||||||||
m6 | p6 | |||||||||||||
JPQ SJPQ | SB (m6) SPB (p6) | 2 | +0.008 +0.002 | +0.012 +0.006 | 1 | 1.5 | 4 | 2 | 0.3 | 0 | ||||
3 | 2 | 5 | 3 | 0.5 | 1 | |||||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2 | 3 | 1 | |||||||||
5 | 2 | 3 | 4 | 10 | 5 | |||||||||
6 | 2 | 3 | 4 | 5 |
Part Number | P 0.01mm Increment | L | B | C | (W) | |||||
Type | D Tolerance and Shape | D | D dim. Tolerance | |||||||
m6 | p6 | |||||||||
JPQ GJPQ SJPQ CJPQ (Buff Finished) MJPQ Applicable when D5 and P5. | SA (m6) SPA (p6) SD (m6) SPD (p6) Applicable when D4. | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.00~2.00 | 4 | 2 | 0.3 | 0 | - |
3 | 1.00~3.00 | 5 | 3 | 0.5 | 1 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2.00~4.00 | 1 | 1.0 | |||||
5 | 2.00~5.00 | 10 | 5 | 1.2 | ||||||
6 | 2.00~6.00 | 1.5 | ||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 15 | 6 | 1.5 | 2 | 1.8 | ||
10 | 3.00~10.00 | 8 | 2 | 2.2 | ||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 2.5 | ||||||
13 | 6.00~13.00 | 22 | 3 | |||||||
16 | 10.00~16.00 | 10 | 3 | 4 | ||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 30 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | (W) | |||||
Type | D Tolerance and Shape | D | D dim. Tolerance | |||||||
m6 | p6 | |||||||||
FPQ GFPQ SFPQ HFPQ CFPQ (Buff Finished) MFPQ Applicable when D5 and P5. | SA (m6) SPA (p6) SD (m6) SPD (p6) Applicable when D4. | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.00~2.00 | 2~4 | 2.0~10.0 | 0.3 | 0 | - |
3 | 1.00~3.00 | 3~6 | 2.0~10.0 | 0.5 | 1 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2.00~4.00 | 4~8 | 2.0~10.0 | 1 | 1.0 | |||
5 | 2.00~5.00 | 5~10 | 2.0~10.0 | 1.2 | ||||||
6 | 2.00~6.00 | 6~12 | 2.0~12.0 | 1.5 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 8~16 | 2.0~15.0 | 1.5 | 2 | 1.8 | ||
10 | 3.00~10.00 | 10~20 | 3.0~20.0 | 2 | 2.2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 12~24 | 3.0~20.0 | 2.5 | ||||
13 | 6.00~13.00 | 13~26 | 5.0~20.0 | 3 | ||||||
16 | 10.00~16.00 | 16~32 | 5.0~20.0 | 3 | 4 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 20~40 | 5.0~20.0 | 5 |