We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FPNATD8-P[5-9/0.01]-L[0-10/1]-B[2-20/0.1]-T[1-15/0.1]-H[11-17/0.5]
Description
Configurable Shoulder Thickness&Diameter/Standard
Stock availability:
On request
If you are inspecting MISUMI FPNATD8-P[5-9/0.01]-L[0-10/1]-B[2-20/0.1]-T[1-15/0.1]-H[11-17/0.5], communicate with FAMAGA, the world's principle producer of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of outputs and individual attention to each consumer. We appreciate everyone, who liased with us - so, our regular clients pick up the most desirable purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4500 such consumers, and we constantly compose new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Honduras, Azerbaijan, San Marino, Tunisia, Netherlands, Burkina Faso, Myanmar, Morocco, Syria, Malawi, Mexico, Bulgaria, Canada, Oman, Macedonia, Nicaragua, Fiji, Denmark, Indonesia, Lithuania, Serbia, Mauritania, Pakistan, Philippines, Uzbekistan, Monaco, Russia, United Arab Emirates, Namibia, Yemen, Burundi, Peru, Afghanistan, Haiti, Croatia, Switzerland, Norway, Georgia, Senegal, Brazil, Guatemala, Bolivia, Seychelles, Kazakhstan, Albania, Czech Republic. A well-shaped logistics link and a partnership network assist us to dispatch our goods anywhere in the planet with no delay without disreputing product quality.
A special source of repute for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only experts, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are verified - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are happy that consumers choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as keep on top of it.
To get some advice or order, get in touch with us or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||
Press Fit | Tapped | Threaded | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | FPJ | FPU | FPN | ATD (Round) DTD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GFPJ | GFPU | GFPN | ||
EN 1.4301 Equiv. | - | - | SFPJ | SFPU | SFPN | ||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | - | HFPU | HFPN | ||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CFPJ | CFPU | CFPN |
Part Number | - | P | - | L | - | B | - | T | - | H | ||||
Type | Shape | D | ||||||||||||
FPU | ATD | 12 | - | P9.98 | - | L15 | - | B5.5 | - | T12 | - | H13 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | T 0.1mm Increment | H 0.5mm Increment | C | m | (W) | Unit Price Round Shape | Unit Price Diamond Shape | |||||||||
Type | Shape | D | D dim. Tolerance m6 | FPJATD | GFPJATD | SFPJATD | CFPJATD | FPJDTD | GFPJDTD | SFPJDTD | CFPJDTD | ||||||||
FPJ GFPJ SFPJ CFPJ | ATD (Round) DTD (Diamond) | 2 | +0.008 +0.002 | 1.00~2.00 | 2~4 | 2.0~10.0 | 1.0~15.0 | 5.0~10.0 | 0.5 | 0.5 | - | - | - | - | - | ||||
3 | 2.00~4.00 | 3~6 | 2.0~10.0 | 6.0~12.0 | 1 | 1.0 | |||||||||||||
4 | +0.012 +0.004 | 2.00~5.00 | 4~8 | 2.0~10.0 | 7.0~13.0 | 1 | 1.2 | ||||||||||||
5 | 3.00~6.00 | 5~10 | 2.0~10.0 | 8.0~14.0 | 2 | 1.5 | |||||||||||||
6 | 4.00~7.00 | 6~12 | 2.0~12.0 | 9.0~15.0 | 1.8 | ||||||||||||||
8 | +0.015 +0.006 | 5.00~9.00 | 8~16 | 2.0~15.0 | 11.0~17.0 | 1.5 | 3 | 2.2 | |||||||||||
10 | 7.00~11.00 | 10~20 | 3.0~20.0 | 13.0~19.0 | 2 | 3 | |||||||||||||
12 | +0.018 +0.007 | 7.00~12.00 | 12~24 | 3.0~20.0 | 13.0~20.0 | 3.2 | |||||||||||||
13 | 8.00~13.00 | 13~26 | 5.0~20.0 | 15.0~21.0 | 4 | 3.5 | |||||||||||||
16 | 13.00~16.00 | 16~32 | 5.0~20.0 | 18.0~24.0 | 3 | 4 | |||||||||||||
20 | +0.021 +0.008 | 16.00~20.00 | 20~40 | 5.0~20.0 | 21.0~27.0 | 5 | 5.5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | T 0.1mm Increment | H 0.5mm Increment | m | (W) | M Coarse | * Tightening Torque Ncm | Unit Price Round Shape | Unit Price Diamond Shape | ||||||||||||
Type | Shape | D | D dim. Tolerance g6 | FPUATD | GFPUATD | SFPUATD | HFPUATD | CFPUATD | FPUDTD | GFPUDTD | SFPUDTD | HFPUDTD | CFPUDTD | ||||||||||
FPU GFPU SFPU HFPU CFPU | ATD (Round) DTD (Diamond) | 5 | -0.004 -0.012 | 3.00~6.00 | 7~10 | 2.0~10.0 | 1.0~15.0 | 8.0~14.0 | 2 | 1.5 | M2 | - | 3 | - | |||||||||
6 | 4.00~7.00 | 6(9)~12 | 9.0~15.0 | 1.8 | M3 | 147 | 5 | ||||||||||||||||
8 | -0.005 -0.014 | 5.00~9.00 | 8(12)~16 | 2.0~12.0 | 11.0~17.0 | 3 | 2.2 | M5 | 676 | 8 | |||||||||||||
10 | 7.00~11.00 | 10(12)~20 | 2.0~15.0 | 13.0~19.0 | 3 | ||||||||||||||||||
12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | 3.0~20.0 | 13.0~20.0 | 3.2 | |||||||||||||||||
13 | 8.00~13.00 | 13(14)~26 | 3.0~20.0 | 15.0~21.0 | 4 | 3.5 | M8 | 2803 | 10 | ||||||||||||||
16 | 13.00~16.00 | 16~32 | 5.0~20.0 | 18.0~24.0 | 4 | 12 | |||||||||||||||||
20 | -0.007 -0.020 | 16.00~20.00 | 20~40 | 5.0~20.0 | 21.0~27.0 | 5 | 5.5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | T 0.1mm Increment | H 0.5mm Increment | m | (W) | * Tightening N cm | Unit Price Round Shape | Unit Price Diamond Shape | |||||||||||
Type | Shape | D | D dim. Tolerance g6 | FPNATD | GFPNATD | SFPNATD | HFPNATD | CFPNATD | FPNDTD | GFPNDTD | SFPNDTD | HFPNDTD | CFPNDTD | ||||||||
FPN GFPN SFPN HFPN CFPN | ATD (Round) DTD (Diamond) | 3 | -0.002 -0.008 | 2.00~4.00 | 2~6 | 2.0~10.0 | 1.0~15.0 | 6.0~12.0 | 1 | 1.0 | 147 | ||||||||||
4 | -0.004 -0.012 | 2.00~5.00 | 2~8 | 2.0~10.0 | 7.0~13.0 | 1.2 | 333 | ||||||||||||||
5 | 3.00~6.00 | 3~10 | 2.0~10.0 | 8.0~14.0 | 2 | 1.5 | 676 | ||||||||||||||
6 | 4.00~7.00 | 3~10 | 2.0~12.0 | 9.0~15.0 | 1.8 | 1156 | |||||||||||||||
8 | -0.005 -0.014 | 5.00~9.00 | 5~10 | 2.0~15.0 | 11.0~17.0 | 3 | 2.2 | 2803 | |||||||||||||
10 | 7.00~11.00 | 5~15 | 3.0~20.0 | 13.0~19.0 | 3 | 5557 | |||||||||||||||
12 | -0.006 -0.017 | 7.00~12.00 | 8~15 | 3.0~20.0 | 13.0~20.0 | 3.2 | 9702 | ||||||||||||||
16 | 13.00~16.00 | 8~20 | 5.0~20.0 | 18.0~24.0 | 4 | 4 | 24108 | ||||||||||||||
20 | -0.007 -0.020 | 16.00~20.00 | 10~20 | 5.0~20.0 | 21.0~27.0 | 5 | 5.5 | 46942 |