We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
CFPJDTD10-P[7-11/0.01]-L[10-20/1]-B[3-25/0.1]-T[1-15/0.1]-H[13-19/0.5]
Description
Configurable Shoulder Thickness&Diameter/Standard
Stock availability:
On request
If you are questing MISUMI CFPJDTD10-P[7-11/0.01]-L[10-20/1]-B[3-25/0.1]-T[1-15/0.1]-H[13-19/0.5], communicate with FAMAGA, the world's dominant retailer of mechanized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are expressed in the quality of outcomes and personalseparate attention to each customer. We appreciate everyone, who joined with us - so, our regular customers obtain the most desirable purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4500 such purchasers, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Serbia, Chile, United Arab Emirates, Libya, Botswana, Fiji, Oman, India, Cyprus, Greece, Nicaragua, Angola, Peru, New Zealand, Egypt, Mauritania, Bulgaria, Malaysia, Sierra Leone, Mauritius, Liechtenstein, Albania, Saudi Arabia, Mexico, Brazil, Burkina Faso, Yemen, Guyana, Rwanda, Costa Rica, Tanzania, United States, Afghanistan, Kuwait, Thailand, Seychelles, Estonia, Jamaica, Philippines, Nepal, Bolivia, Cape Verde, Haiti, Togo. A advanced logistics chains and a partnership network assist us to ship our goods anywhere in the planet with no delay without damaging product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We call into our team only experts, who already have experience in the range of industrial equipment.
All products from FAMAGA are affirmed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is ascending every day. We are happy that buyers choose FAMAGA again and again, and we strive to make more exceptional and technologically innovative industrial equipment so as not to lower the bar.
To get some advice or order, phone us or write a message to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||
Press Fit | Tapped | Threaded | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | FPJ | FPU | FPN | ATD (Round) DTD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GFPJ | GFPU | GFPN | ||
EN 1.4301 Equiv. | - | - | SFPJ | SFPU | SFPN | ||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | - | HFPU | HFPN | ||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CFPJ | CFPU | CFPN |
Part Number | - | P | - | L | - | B | - | T | - | H | ||||
Type | Shape | D | ||||||||||||
FPU | ATD | 12 | - | P9.98 | - | L15 | - | B5.5 | - | T12 | - | H13 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | T 0.1mm Increment | H 0.5mm Increment | C | m | (W) | Unit Price Round Shape | Unit Price Diamond Shape | |||||||||
Type | Shape | D | D dim. Tolerance m6 | FPJATD | GFPJATD | SFPJATD | CFPJATD | FPJDTD | GFPJDTD | SFPJDTD | CFPJDTD | ||||||||
FPJ GFPJ SFPJ CFPJ | ATD (Round) DTD (Diamond) | 2 | +0.008 +0.002 | 1.00~2.00 | 2~4 | 2.0~10.0 | 1.0~15.0 | 5.0~10.0 | 0.5 | 0.5 | - | - | - | - | - | ||||
3 | 2.00~4.00 | 3~6 | 2.0~10.0 | 6.0~12.0 | 1 | 1.0 | |||||||||||||
4 | +0.012 +0.004 | 2.00~5.00 | 4~8 | 2.0~10.0 | 7.0~13.0 | 1 | 1.2 | ||||||||||||
5 | 3.00~6.00 | 5~10 | 2.0~10.0 | 8.0~14.0 | 2 | 1.5 | |||||||||||||
6 | 4.00~7.00 | 6~12 | 2.0~12.0 | 9.0~15.0 | 1.8 | ||||||||||||||
8 | +0.015 +0.006 | 5.00~9.00 | 8~16 | 2.0~15.0 | 11.0~17.0 | 1.5 | 3 | 2.2 | |||||||||||
10 | 7.00~11.00 | 10~20 | 3.0~20.0 | 13.0~19.0 | 2 | 3 | |||||||||||||
12 | +0.018 +0.007 | 7.00~12.00 | 12~24 | 3.0~20.0 | 13.0~20.0 | 3.2 | |||||||||||||
13 | 8.00~13.00 | 13~26 | 5.0~20.0 | 15.0~21.0 | 4 | 3.5 | |||||||||||||
16 | 13.00~16.00 | 16~32 | 5.0~20.0 | 18.0~24.0 | 3 | 4 | |||||||||||||
20 | +0.021 +0.008 | 16.00~20.00 | 20~40 | 5.0~20.0 | 21.0~27.0 | 5 | 5.5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | T 0.1mm Increment | H 0.5mm Increment | m | (W) | M Coarse | * Tightening Torque Ncm | Unit Price Round Shape | Unit Price Diamond Shape | ||||||||||||
Type | Shape | D | D dim. Tolerance g6 | FPUATD | GFPUATD | SFPUATD | HFPUATD | CFPUATD | FPUDTD | GFPUDTD | SFPUDTD | HFPUDTD | CFPUDTD | ||||||||||
FPU GFPU SFPU HFPU CFPU | ATD (Round) DTD (Diamond) | 5 | -0.004 -0.012 | 3.00~6.00 | 7~10 | 2.0~10.0 | 1.0~15.0 | 8.0~14.0 | 2 | 1.5 | M2 | - | 3 | - | |||||||||
6 | 4.00~7.00 | 6(9)~12 | 9.0~15.0 | 1.8 | M3 | 147 | 5 | ||||||||||||||||
8 | -0.005 -0.014 | 5.00~9.00 | 8(12)~16 | 2.0~12.0 | 11.0~17.0 | 3 | 2.2 | M5 | 676 | 8 | |||||||||||||
10 | 7.00~11.00 | 10(12)~20 | 2.0~15.0 | 13.0~19.0 | 3 | ||||||||||||||||||
12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | 3.0~20.0 | 13.0~20.0 | 3.2 | |||||||||||||||||
13 | 8.00~13.00 | 13(14)~26 | 3.0~20.0 | 15.0~21.0 | 4 | 3.5 | M8 | 2803 | 10 | ||||||||||||||
16 | 13.00~16.00 | 16~32 | 5.0~20.0 | 18.0~24.0 | 4 | 12 | |||||||||||||||||
20 | -0.007 -0.020 | 16.00~20.00 | 20~40 | 5.0~20.0 | 21.0~27.0 | 5 | 5.5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | T 0.1mm Increment | H 0.5mm Increment | m | (W) | * Tightening N cm | Unit Price Round Shape | Unit Price Diamond Shape | |||||||||||
Type | Shape | D | D dim. Tolerance g6 | FPNATD | GFPNATD | SFPNATD | HFPNATD | CFPNATD | FPNDTD | GFPNDTD | SFPNDTD | HFPNDTD | CFPNDTD | ||||||||
FPN GFPN SFPN HFPN CFPN | ATD (Round) DTD (Diamond) | 3 | -0.002 -0.008 | 2.00~4.00 | 2~6 | 2.0~10.0 | 1.0~15.0 | 6.0~12.0 | 1 | 1.0 | 147 | ||||||||||
4 | -0.004 -0.012 | 2.00~5.00 | 2~8 | 2.0~10.0 | 7.0~13.0 | 1.2 | 333 | ||||||||||||||
5 | 3.00~6.00 | 3~10 | 2.0~10.0 | 8.0~14.0 | 2 | 1.5 | 676 | ||||||||||||||
6 | 4.00~7.00 | 3~10 | 2.0~12.0 | 9.0~15.0 | 1.8 | 1156 | |||||||||||||||
8 | -0.005 -0.014 | 5.00~9.00 | 5~10 | 2.0~15.0 | 11.0~17.0 | 3 | 2.2 | 2803 | |||||||||||||
10 | 7.00~11.00 | 5~15 | 3.0~20.0 | 13.0~19.0 | 3 | 5557 | |||||||||||||||
12 | -0.006 -0.017 | 7.00~12.00 | 8~15 | 3.0~20.0 | 13.0~20.0 | 3.2 | 9702 | ||||||||||||||
16 | 13.00~16.00 | 8~20 | 5.0~20.0 | 18.0~24.0 | 4 | 4 | 24108 | ||||||||||||||
20 | -0.007 -0.020 | 16.00~20.00 | 10~20 | 5.0~20.0 | 21.0~27.0 | 5 | 5.5 | 46942 |