We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
GFPUDT20-P[16-20/0.01]-L[20-40/1]-B[5-20/0.1]-T[1-10/0.5]
Description
Configurable Shoulder Thickness/Standard
Stock availability:
On request
If you are looking for MISUMI GFPUDT20-P[16-20/0.01]-L[20-40/1]-B[5-20/0.1]-T[1-10/0.5], communicate with FAMAGA, the world's main company of industrial equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of outcomes and personalseparate attention to each customer. We esteem everyone, who worked with us - so, our regular clients obtain the most attractive purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such buyers, and we constantly compose new agreements. More than 750 transactions are made per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Turkmenistan, Yemen, Iraq, Poland, Dominican Republic, Sweden, Belize, Eritrea, Albania, Ghana, Burkina Faso, New Zealand, Peru, Botswana, Honduras, Swaziland, El Salvador, Costa Rica, Cyprus, Haiti, Fiji, Mauritania, Laos, Kuwait, Kiribati, Nicaragua, Sudan, Tajikistan, Jamaica, Serbia, Guyana, China, Kyrgyzstan, Syria, Antigua and Barbuda, Panama, Angola, Indonesia, Switzerland, Ireland, Guatemala, Ukraine, Comoros, Madagascar, Samoa, Mexico. A advanced logistics network and a partnership network assist us to conduct our units anywhere in the globe with no delay without undermining product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the sphere of industrial equipment.
All spare parts from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been provided, and this amount is increasing every day. We are glad that clients choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as keep on top of it.
To inquire or book, phone us or write to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||
Press Fit | Tapped | Threaded | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | FPJ | FPU | FPN | AT (Round) DT (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GFPJ | GFPU | GFPN | ||
EN 1.4301 Equiv. | - | - | SFPJ | SFPU | SFPN | ||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HFPJ (Round only) | - | HFPN | ||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CFPJ | CFPU | CFPN |
Part Number | - | P | - | L | - | B | - | T | ||||
Type | Shape | D | ||||||||||
FPJ | AT | 10 | - | P8.03 | - | L10 | - | B4.0 | - | T5.0 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | T 0.5mm Increment | H | C | m | (W) | Unit Price Round Shape | Unit Price Diamond Shape | |||||||||||
Type | Shape | D | D dim. Tolerance m6 | FPJAT | GFPJAT | SFPJAT | HFPJAT | CFPJAT | FPJDT | GFPJDT | SFPJDT | HFPJDT | CFPJDT | ||||||||
FPJ GFPJ SFPJ HFPJ CFPJ | AT (Round) DT (Diamond) | 2 | +0.008 +0.002 | 1.00~2.00 | 2~4 | 2.0~10.0 | 1.0~10.0 | 7 | 0.5 | 0.5 | - | - | - | - | - | - | |||||
3 | 2.00~4.00 | 3~6 | 2.0~10.0 | 8 | 1 | 1.0 | - | ||||||||||||||
4 | +0.012 +0.004 | 2.00~5.00 | 4~8 | 2.0~10.0 | 9 | 1 | 1.2 | - | |||||||||||||
5 | 3.00~6.00 | 5~10 | 2.0~10.0 | 10 | 2 | 1.5 | - | ||||||||||||||
6 | 4.00~7.00 | 6~12 | 2.0~12.0 | 11 | 1.8 | - | |||||||||||||||
8 | +0.015 +0.006 | 5.00~9.00 | 8~16 | 2.0~15.0 | 13 | 1.5 | 3 | 2.2 | - | ||||||||||||
10 | 7.00~11.00 | 10~20 | 3.0~20.0 | 15 | 2 | 3 | - | ||||||||||||||
12 | +0.018 +0.007 | 7.00~12.00 | 12~24 | 3.0~20.0 | 17 | 3.2 | - | ||||||||||||||
13 | 8.00~13.00 | 13~26 | 5.0~20.0 | 18 | 4 | 3.5 | - | ||||||||||||||
16 | 13.00~16.00 | 16~32 | 5.0~20.0 | 21 | 3 | 4 | - | ||||||||||||||
20 | +0.021 +0.008 | 16.00~20.00 | 20~40 | 5.0~20.0 | 25 | 5 | 5.5 | - |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | T 0.5mm Increment | H | m | (W) | M Coarse | * Tightening N • cm | Unit Price Round Shape | Unit Price Diamond Shape | ||||||||||||
Type | Shape | D | D dim. Tolerance g6 | FPUAT | GFPUAT | SFPUAT | HFPUAT | CFPUAT | FPUDT | GFPUDT | SFPUDT | HFPUDT | CFPUDT | ||||||||||
FPU GFPU SFPU CFPU | AT (Round) DT (Diamond) | 5 | -0.004 -0.012 | 3.00~6.00 | 7~10 | 2.0~10.0 | 1.0~10.0 | 10 | 2 | 1.5 | M2 | - | 3 | - | - | ||||||||
6 | 4.00~7.00 | 6(9)~12 | 11 | 1.8 | M3 | 147 | 5 | - | - | ||||||||||||||
8 | -0.005 -0.014 | 5.00~9.00 | 8(12)~16 | 2.0~12.0 | 13 | 3 | 2.2 | M5 | 676 | 8 | - | - | |||||||||||
10 | 7.00~11.00 | 10(12)~20 | 2.0~15.0 | 15 | 3 | - | - | ||||||||||||||||
12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | 3.0~20.0 | 17 | 3.2 | - | - | |||||||||||||||
13 | 8.00~13.00 | 13(14)~26 | 3.0~20.0 | 18 | 4 | 3.5 | M8 | 2803 | 10 | - | - | ||||||||||||
16 | 13.00~16.00 | 16~32 | 5.0~20.0 | 21 | 4 | 12 | - | - | |||||||||||||||
20 | -0.007 -0.020 | 16.00~20.00 | 20~40 | 5.0~20.0 | 25 | 5 | 5.5 | - | - |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | T 0.5mm Increment | H | m | (W) | * Tightening N • cm | Unit Price Round Shape | Unit Price Diamond Shape | |||||||||||
Type | Shape | D | D dim. Tolerance g6 | FPNAT | GFPNAT | SFPNAT | HFPNAT | CFPNAT | FPNDT | GFPNDT | SFPNDT | HFPNDT | CFPNDT | ||||||||
FPN GFPN SFPN HFPN CFPN | AT (Round) DT (Diamond) | 3 | -0.002 -0.008 | 2.00~4.00 | 2~6 | 2.0~10.0 | 1.0~10.0 | 8 | 1 | 1.0 | 147 | ||||||||||
4 | -0.004 -0.012 | 2.00~5.00 | 2~8 | 2.0~10.0 | 9 | 1.2 | 333 | ||||||||||||||
5 | 3.00~6.00 | 3~10 | 2.0~10.0 | 10 | 2 | 1.5 | 676 | ||||||||||||||
6 | 4.00~7.00 | 3~10 | 2.0~12.0 | 11 | 1.8 | 1156 | |||||||||||||||
8 | -0.005 -0.014 | 5.00~9.00 | 5~10 | 2.0~15.0 | 13 | 3 | 2.2 | 2803 | |||||||||||||
10 | 7.00~11.00 | 5~15 | 3.0~20.0 | 15 | 3 | 5557 | |||||||||||||||
12 | -0.006 -0.017 | 7.00~12.00 | 8~15 | 3.0~20.0 | 17 | 3.2 | 9702 | ||||||||||||||
16 | 13.00~16.00 | 8~20 | 5.0~20.0 | 21 | 4 | 4 | 24108 | ||||||||||||||
20 | -0.007 -0.020 | 16.00~20.00 | 10~20 | 5.0~20.0 | 25 | 5 | 5.5 | 46942 |