We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
GFPNDT5-P[3-6/0.01]-L[0-10/1]-B[2-10/0.1]-T[1-10/0.5]
Description
Configurable Shoulder Thickness/Standard
Stock availability:
On request
If you are looking for MISUMI GFPNDT5-P[3-6/0.01]-L[0-10/1]-B[2-10/0.1]-T[1-10/0.5], call FAMAGA, the world's top distributor of industrialized equipment. Our company has functioned for more than ten years - these are years of experience, which are illustrated in the quality of products and personalseparate attention to each purchaser. We cherish everyone, who cooperated with us - hence, our regular clients receive the most acceptable purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such buyers, and we constantly compose new agreements. More than 600 transactions are made per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Georgia, Uganda, Portugal, San Marino, Montenegro, Guinea, Sierra Leone, Malaysia, Azerbaijan, Brazil, Morocco, Cuba, Kazakhstan, Haiti, Moldova, Hungary, Slovenia, Bangladesh, Tonga, Burma, Romania, Kiribati, Netherlands, Bhutan, Cameroon, Paraguay, Ireland, Sudan, Finland, Tunisia, Gambia, Liberia, Russia, Tanzania, Argentina, Antigua and Barbuda, Lithuania, Indonesia, Liechtenstein, Panama, India, Andorra, Uruguay, Iceland, Kyrgyzstan, Czech Republic, Peru, Turkey, New Zealand, Slovakia, Thailand. A advanced logistics chains and a partnership network assist us to conduct our units anywhere in the world with no delay without undermining product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the direction of factory-made equipment.
All products from FAMAGA are ensured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been provided, and this bulk is amounting every day. We are glad that users choose FAMAGA again and again, and we are eager to make more exceptional and technologically innovative industrial equipment so as stay in control.
To ask a question or make a request, contact us or write a message to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||
Press Fit | Tapped | Threaded | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | FPJ | FPU | FPN | AT (Round) DT (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GFPJ | GFPU | GFPN | ||
EN 1.4301 Equiv. | - | - | SFPJ | SFPU | SFPN | ||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HFPJ (Round only) | - | HFPN | ||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CFPJ | CFPU | CFPN |
Part Number | - | P | - | L | - | B | - | T | ||||
Type | Shape | D | ||||||||||
FPJ | AT | 10 | - | P8.03 | - | L10 | - | B4.0 | - | T5.0 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | T 0.5mm Increment | H | C | m | (W) | Unit Price Round Shape | Unit Price Diamond Shape | |||||||||||
Type | Shape | D | D dim. Tolerance m6 | FPJAT | GFPJAT | SFPJAT | HFPJAT | CFPJAT | FPJDT | GFPJDT | SFPJDT | HFPJDT | CFPJDT | ||||||||
FPJ GFPJ SFPJ HFPJ CFPJ | AT (Round) DT (Diamond) | 2 | +0.008 +0.002 | 1.00~2.00 | 2~4 | 2.0~10.0 | 1.0~10.0 | 7 | 0.5 | 0.5 | - | - | - | - | - | - | |||||
3 | 2.00~4.00 | 3~6 | 2.0~10.0 | 8 | 1 | 1.0 | - | ||||||||||||||
4 | +0.012 +0.004 | 2.00~5.00 | 4~8 | 2.0~10.0 | 9 | 1 | 1.2 | - | |||||||||||||
5 | 3.00~6.00 | 5~10 | 2.0~10.0 | 10 | 2 | 1.5 | - | ||||||||||||||
6 | 4.00~7.00 | 6~12 | 2.0~12.0 | 11 | 1.8 | - | |||||||||||||||
8 | +0.015 +0.006 | 5.00~9.00 | 8~16 | 2.0~15.0 | 13 | 1.5 | 3 | 2.2 | - | ||||||||||||
10 | 7.00~11.00 | 10~20 | 3.0~20.0 | 15 | 2 | 3 | - | ||||||||||||||
12 | +0.018 +0.007 | 7.00~12.00 | 12~24 | 3.0~20.0 | 17 | 3.2 | - | ||||||||||||||
13 | 8.00~13.00 | 13~26 | 5.0~20.0 | 18 | 4 | 3.5 | - | ||||||||||||||
16 | 13.00~16.00 | 16~32 | 5.0~20.0 | 21 | 3 | 4 | - | ||||||||||||||
20 | +0.021 +0.008 | 16.00~20.00 | 20~40 | 5.0~20.0 | 25 | 5 | 5.5 | - |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | T 0.5mm Increment | H | m | (W) | M Coarse | * Tightening N • cm | Unit Price Round Shape | Unit Price Diamond Shape | ||||||||||||
Type | Shape | D | D dim. Tolerance g6 | FPUAT | GFPUAT | SFPUAT | HFPUAT | CFPUAT | FPUDT | GFPUDT | SFPUDT | HFPUDT | CFPUDT | ||||||||||
FPU GFPU SFPU CFPU | AT (Round) DT (Diamond) | 5 | -0.004 -0.012 | 3.00~6.00 | 7~10 | 2.0~10.0 | 1.0~10.0 | 10 | 2 | 1.5 | M2 | - | 3 | - | - | ||||||||
6 | 4.00~7.00 | 6(9)~12 | 11 | 1.8 | M3 | 147 | 5 | - | - | ||||||||||||||
8 | -0.005 -0.014 | 5.00~9.00 | 8(12)~16 | 2.0~12.0 | 13 | 3 | 2.2 | M5 | 676 | 8 | - | - | |||||||||||
10 | 7.00~11.00 | 10(12)~20 | 2.0~15.0 | 15 | 3 | - | - | ||||||||||||||||
12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | 3.0~20.0 | 17 | 3.2 | - | - | |||||||||||||||
13 | 8.00~13.00 | 13(14)~26 | 3.0~20.0 | 18 | 4 | 3.5 | M8 | 2803 | 10 | - | - | ||||||||||||
16 | 13.00~16.00 | 16~32 | 5.0~20.0 | 21 | 4 | 12 | - | - | |||||||||||||||
20 | -0.007 -0.020 | 16.00~20.00 | 20~40 | 5.0~20.0 | 25 | 5 | 5.5 | - | - |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | T 0.5mm Increment | H | m | (W) | * Tightening N • cm | Unit Price Round Shape | Unit Price Diamond Shape | |||||||||||
Type | Shape | D | D dim. Tolerance g6 | FPNAT | GFPNAT | SFPNAT | HFPNAT | CFPNAT | FPNDT | GFPNDT | SFPNDT | HFPNDT | CFPNDT | ||||||||
FPN GFPN SFPN HFPN CFPN | AT (Round) DT (Diamond) | 3 | -0.002 -0.008 | 2.00~4.00 | 2~6 | 2.0~10.0 | 1.0~10.0 | 8 | 1 | 1.0 | 147 | ||||||||||
4 | -0.004 -0.012 | 2.00~5.00 | 2~8 | 2.0~10.0 | 9 | 1.2 | 333 | ||||||||||||||
5 | 3.00~6.00 | 3~10 | 2.0~10.0 | 10 | 2 | 1.5 | 676 | ||||||||||||||
6 | 4.00~7.00 | 3~10 | 2.0~12.0 | 11 | 1.8 | 1156 | |||||||||||||||
8 | -0.005 -0.014 | 5.00~9.00 | 5~10 | 2.0~15.0 | 13 | 3 | 2.2 | 2803 | |||||||||||||
10 | 7.00~11.00 | 5~15 | 3.0~20.0 | 15 | 3 | 5557 | |||||||||||||||
12 | -0.006 -0.017 | 7.00~12.00 | 8~15 | 3.0~20.0 | 17 | 3.2 | 9702 | ||||||||||||||
16 | 13.00~16.00 | 8~20 | 5.0~20.0 | 21 | 4 | 4 | 24108 | ||||||||||||||
20 | -0.007 -0.020 | 16.00~20.00 | 10~20 | 5.0~20.0 | 25 | 5 | 5.5 | 46942 |