We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
GFPJAT2-P[1-2/0.01]-L[2-4/1]-B[2-10/0.1]-T[1-10/0.5]
Description
Configurable Shoulder Thickness/Standard
Stock availability:
On request
If you are inspecting MISUMI GFPJAT2-P[1-2/0.01]-L[2-4/1]-B[2-10/0.1]-T[1-10/0.5], reach FAMAGA, the world's dominant retailer of mechanized equipment. Our company has progressed for more than ten years - these are ages of experience, which are depicted in the quality of items and particular attention to each user. We value everyone, who collaborated with us - so, our regular consumers get the most beneficial purchase terms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such clients, and we constantly make new agreements. More than 750 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, Armenia, Bahamas, Saudi Arabia, Zimbabwe, Eritrea, Laos, Switzerland, Brunei, Slovenia, Turkmenistan, Costa Rica, Monaco, Indonesia, Nepal, Ecuador, Liberia, The Bahamas, Albania, Angola, Egypt, Georgia, Luxembourg, East Timor, Bulgaria, El Salvador, Libya, Estonia, Cyprus, Qatar, Ukraine, Botswana, Madagascar, Nicaragua, Cape Verde, Comoros, Sierra Leone, Vietnam, Greece, Mauritania, Finland, South Korea, Sweden, Dominica, Kyrgyzstan, The Gambia, North Korea, Swaziland, Cameroon. A well-built logistics bond and a partnership network help us to dispatch our goods anywhere in the globe immediately without disreputing product quality.
A special source of dignity for FAMAGA is its workers, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the sphere of industrial equipment.
All goods from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been provided, and this amount is ascending every day. We are glad that users choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as keep on top of it.
To get some advice or book, phone us or send a message to the online chat on our site. You can also direct a list of the necessary equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||
Press Fit | Tapped | Threaded | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | FPJ | FPU | FPN | AT (Round) DT (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GFPJ | GFPU | GFPN | ||
EN 1.4301 Equiv. | - | - | SFPJ | SFPU | SFPN | ||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HFPJ (Round only) | - | HFPN | ||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CFPJ | CFPU | CFPN |
Part Number | - | P | - | L | - | B | - | T | ||||
Type | Shape | D | ||||||||||
FPJ | AT | 10 | - | P8.03 | - | L10 | - | B4.0 | - | T5.0 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | T 0.5mm Increment | H | C | m | (W) | Unit Price Round Shape | Unit Price Diamond Shape | |||||||||||
Type | Shape | D | D dim. Tolerance m6 | FPJAT | GFPJAT | SFPJAT | HFPJAT | CFPJAT | FPJDT | GFPJDT | SFPJDT | HFPJDT | CFPJDT | ||||||||
FPJ GFPJ SFPJ HFPJ CFPJ | AT (Round) DT (Diamond) | 2 | +0.008 +0.002 | 1.00~2.00 | 2~4 | 2.0~10.0 | 1.0~10.0 | 7 | 0.5 | 0.5 | - | - | - | - | - | - | |||||
3 | 2.00~4.00 | 3~6 | 2.0~10.0 | 8 | 1 | 1.0 | - | ||||||||||||||
4 | +0.012 +0.004 | 2.00~5.00 | 4~8 | 2.0~10.0 | 9 | 1 | 1.2 | - | |||||||||||||
5 | 3.00~6.00 | 5~10 | 2.0~10.0 | 10 | 2 | 1.5 | - | ||||||||||||||
6 | 4.00~7.00 | 6~12 | 2.0~12.0 | 11 | 1.8 | - | |||||||||||||||
8 | +0.015 +0.006 | 5.00~9.00 | 8~16 | 2.0~15.0 | 13 | 1.5 | 3 | 2.2 | - | ||||||||||||
10 | 7.00~11.00 | 10~20 | 3.0~20.0 | 15 | 2 | 3 | - | ||||||||||||||
12 | +0.018 +0.007 | 7.00~12.00 | 12~24 | 3.0~20.0 | 17 | 3.2 | - | ||||||||||||||
13 | 8.00~13.00 | 13~26 | 5.0~20.0 | 18 | 4 | 3.5 | - | ||||||||||||||
16 | 13.00~16.00 | 16~32 | 5.0~20.0 | 21 | 3 | 4 | - | ||||||||||||||
20 | +0.021 +0.008 | 16.00~20.00 | 20~40 | 5.0~20.0 | 25 | 5 | 5.5 | - |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | T 0.5mm Increment | H | m | (W) | M Coarse | * Tightening N • cm | Unit Price Round Shape | Unit Price Diamond Shape | ||||||||||||
Type | Shape | D | D dim. Tolerance g6 | FPUAT | GFPUAT | SFPUAT | HFPUAT | CFPUAT | FPUDT | GFPUDT | SFPUDT | HFPUDT | CFPUDT | ||||||||||
FPU GFPU SFPU CFPU | AT (Round) DT (Diamond) | 5 | -0.004 -0.012 | 3.00~6.00 | 7~10 | 2.0~10.0 | 1.0~10.0 | 10 | 2 | 1.5 | M2 | - | 3 | - | - | ||||||||
6 | 4.00~7.00 | 6(9)~12 | 11 | 1.8 | M3 | 147 | 5 | - | - | ||||||||||||||
8 | -0.005 -0.014 | 5.00~9.00 | 8(12)~16 | 2.0~12.0 | 13 | 3 | 2.2 | M5 | 676 | 8 | - | - | |||||||||||
10 | 7.00~11.00 | 10(12)~20 | 2.0~15.0 | 15 | 3 | - | - | ||||||||||||||||
12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | 3.0~20.0 | 17 | 3.2 | - | - | |||||||||||||||
13 | 8.00~13.00 | 13(14)~26 | 3.0~20.0 | 18 | 4 | 3.5 | M8 | 2803 | 10 | - | - | ||||||||||||
16 | 13.00~16.00 | 16~32 | 5.0~20.0 | 21 | 4 | 12 | - | - | |||||||||||||||
20 | -0.007 -0.020 | 16.00~20.00 | 20~40 | 5.0~20.0 | 25 | 5 | 5.5 | - | - |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | T 0.5mm Increment | H | m | (W) | * Tightening N • cm | Unit Price Round Shape | Unit Price Diamond Shape | |||||||||||
Type | Shape | D | D dim. Tolerance g6 | FPNAT | GFPNAT | SFPNAT | HFPNAT | CFPNAT | FPNDT | GFPNDT | SFPNDT | HFPNDT | CFPNDT | ||||||||
FPN GFPN SFPN HFPN CFPN | AT (Round) DT (Diamond) | 3 | -0.002 -0.008 | 2.00~4.00 | 2~6 | 2.0~10.0 | 1.0~10.0 | 8 | 1 | 1.0 | 147 | ||||||||||
4 | -0.004 -0.012 | 2.00~5.00 | 2~8 | 2.0~10.0 | 9 | 1.2 | 333 | ||||||||||||||
5 | 3.00~6.00 | 3~10 | 2.0~10.0 | 10 | 2 | 1.5 | 676 | ||||||||||||||
6 | 4.00~7.00 | 3~10 | 2.0~12.0 | 11 | 1.8 | 1156 | |||||||||||||||
8 | -0.005 -0.014 | 5.00~9.00 | 5~10 | 2.0~15.0 | 13 | 3 | 2.2 | 2803 | |||||||||||||
10 | 7.00~11.00 | 5~15 | 3.0~20.0 | 15 | 3 | 5557 | |||||||||||||||
12 | -0.006 -0.017 | 7.00~12.00 | 8~15 | 3.0~20.0 | 17 | 3.2 | 9702 | ||||||||||||||
16 | 13.00~16.00 | 8~20 | 5.0~20.0 | 21 | 4 | 4 | 24108 | ||||||||||||||
20 | -0.007 -0.020 | 16.00~20.00 | 10~20 | 5.0~20.0 | 25 | 5 | 5.5 | 46942 |