We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FPNDT3-P[2-4/0.01]-L[0-6/1]-B[2-10/0.1]-T[1-10/0.5]
Description
Configurable Shoulder Thickness/Standard
Stock availability:
On request
If you are pursuing MISUMI FPNDT3-P[2-4/0.01]-L[0-6/1]-B[2-10/0.1]-T[1-10/0.5], communicate with FAMAGA, the world's principle producer of machine made equipment. Our company has worked for more than ten years - these are years of experience, which are expressed in the quality of outcomes and special attention to each buyer. We esteem everyone, who liased with us - so, our regular customers bring in the most attractive purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such consumers, and we constantly form new agreements. More than 750 transactions are made per day, because FAMAGA works all over the planet Germany, United Kingdom, Niger, The Bahamas, Bahamas, Canada, Georgia, Israel, Pakistan, Haiti, Nicaragua, Slovenia, Andorra, Romania, Croatia, Costa Rica, Palestine, Tanzania, Malta, South Korea, Bolivia, Indonesia, Djibouti, Mauritania, Guyana, Algeria, Switzerland, Uruguay, Egypt, Peru, Serbia, Namibia, Comoros, Mauritius, Cyprus, Guatemala, Sweden, Malaysia, Samoa, Czech Republic, Brunei, Poland, Kuwait, Tunisia, Philippines, Australia, Togo, Nigeria, Tajikistan, India. A well-developed logistics network and a partnership network assist us to deliver our units anywhere in the globe with no delay without compromising product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the sphere of industrial equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been delivered, and this number is increasing every day. We are happy that users choose FAMAGA again and again, and we are happy to make more advanced and technologically advanced industrial equipment so as not to lower the bar.
To consult or order, call us by phone or send a message to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||
Press Fit | Tapped | Threaded | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | FPJ | FPU | FPN | AT (Round) DT (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GFPJ | GFPU | GFPN | ||
EN 1.4301 Equiv. | - | - | SFPJ | SFPU | SFPN | ||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HFPJ (Round only) | - | HFPN | ||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CFPJ | CFPU | CFPN |
Part Number | - | P | - | L | - | B | - | T | ||||
Type | Shape | D | ||||||||||
FPJ | AT | 10 | - | P8.03 | - | L10 | - | B4.0 | - | T5.0 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | T 0.5mm Increment | H | C | m | (W) | Unit Price Round Shape | Unit Price Diamond Shape | |||||||||||
Type | Shape | D | D dim. Tolerance m6 | FPJAT | GFPJAT | SFPJAT | HFPJAT | CFPJAT | FPJDT | GFPJDT | SFPJDT | HFPJDT | CFPJDT | ||||||||
FPJ GFPJ SFPJ HFPJ CFPJ | AT (Round) DT (Diamond) | 2 | +0.008 +0.002 | 1.00~2.00 | 2~4 | 2.0~10.0 | 1.0~10.0 | 7 | 0.5 | 0.5 | - | - | - | - | - | - | |||||
3 | 2.00~4.00 | 3~6 | 2.0~10.0 | 8 | 1 | 1.0 | - | ||||||||||||||
4 | +0.012 +0.004 | 2.00~5.00 | 4~8 | 2.0~10.0 | 9 | 1 | 1.2 | - | |||||||||||||
5 | 3.00~6.00 | 5~10 | 2.0~10.0 | 10 | 2 | 1.5 | - | ||||||||||||||
6 | 4.00~7.00 | 6~12 | 2.0~12.0 | 11 | 1.8 | - | |||||||||||||||
8 | +0.015 +0.006 | 5.00~9.00 | 8~16 | 2.0~15.0 | 13 | 1.5 | 3 | 2.2 | - | ||||||||||||
10 | 7.00~11.00 | 10~20 | 3.0~20.0 | 15 | 2 | 3 | - | ||||||||||||||
12 | +0.018 +0.007 | 7.00~12.00 | 12~24 | 3.0~20.0 | 17 | 3.2 | - | ||||||||||||||
13 | 8.00~13.00 | 13~26 | 5.0~20.0 | 18 | 4 | 3.5 | - | ||||||||||||||
16 | 13.00~16.00 | 16~32 | 5.0~20.0 | 21 | 3 | 4 | - | ||||||||||||||
20 | +0.021 +0.008 | 16.00~20.00 | 20~40 | 5.0~20.0 | 25 | 5 | 5.5 | - |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | T 0.5mm Increment | H | m | (W) | M Coarse | * Tightening N • cm | Unit Price Round Shape | Unit Price Diamond Shape | ||||||||||||
Type | Shape | D | D dim. Tolerance g6 | FPUAT | GFPUAT | SFPUAT | HFPUAT | CFPUAT | FPUDT | GFPUDT | SFPUDT | HFPUDT | CFPUDT | ||||||||||
FPU GFPU SFPU CFPU | AT (Round) DT (Diamond) | 5 | -0.004 -0.012 | 3.00~6.00 | 7~10 | 2.0~10.0 | 1.0~10.0 | 10 | 2 | 1.5 | M2 | - | 3 | - | - | ||||||||
6 | 4.00~7.00 | 6(9)~12 | 11 | 1.8 | M3 | 147 | 5 | - | - | ||||||||||||||
8 | -0.005 -0.014 | 5.00~9.00 | 8(12)~16 | 2.0~12.0 | 13 | 3 | 2.2 | M5 | 676 | 8 | - | - | |||||||||||
10 | 7.00~11.00 | 10(12)~20 | 2.0~15.0 | 15 | 3 | - | - | ||||||||||||||||
12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | 3.0~20.0 | 17 | 3.2 | - | - | |||||||||||||||
13 | 8.00~13.00 | 13(14)~26 | 3.0~20.0 | 18 | 4 | 3.5 | M8 | 2803 | 10 | - | - | ||||||||||||
16 | 13.00~16.00 | 16~32 | 5.0~20.0 | 21 | 4 | 12 | - | - | |||||||||||||||
20 | -0.007 -0.020 | 16.00~20.00 | 20~40 | 5.0~20.0 | 25 | 5 | 5.5 | - | - |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | T 0.5mm Increment | H | m | (W) | * Tightening N • cm | Unit Price Round Shape | Unit Price Diamond Shape | |||||||||||
Type | Shape | D | D dim. Tolerance g6 | FPNAT | GFPNAT | SFPNAT | HFPNAT | CFPNAT | FPNDT | GFPNDT | SFPNDT | HFPNDT | CFPNDT | ||||||||
FPN GFPN SFPN HFPN CFPN | AT (Round) DT (Diamond) | 3 | -0.002 -0.008 | 2.00~4.00 | 2~6 | 2.0~10.0 | 1.0~10.0 | 8 | 1 | 1.0 | 147 | ||||||||||
4 | -0.004 -0.012 | 2.00~5.00 | 2~8 | 2.0~10.0 | 9 | 1.2 | 333 | ||||||||||||||
5 | 3.00~6.00 | 3~10 | 2.0~10.0 | 10 | 2 | 1.5 | 676 | ||||||||||||||
6 | 4.00~7.00 | 3~10 | 2.0~12.0 | 11 | 1.8 | 1156 | |||||||||||||||
8 | -0.005 -0.014 | 5.00~9.00 | 5~10 | 2.0~15.0 | 13 | 3 | 2.2 | 2803 | |||||||||||||
10 | 7.00~11.00 | 5~15 | 3.0~20.0 | 15 | 3 | 5557 | |||||||||||||||
12 | -0.006 -0.017 | 7.00~12.00 | 8~15 | 3.0~20.0 | 17 | 3.2 | 9702 | ||||||||||||||
16 | 13.00~16.00 | 8~20 | 5.0~20.0 | 21 | 4 | 4 | 24108 | ||||||||||||||
20 | -0.007 -0.020 | 16.00~20.00 | 10~20 | 5.0~20.0 | 25 | 5 | 5.5 | 46942 |