We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
CJPGQD20-P[13-30/0.01]-L[10-40/1]-B[5-20/0.1]
Description
Spherical Large Head/Setscrew Mounting Shank
Stock availability:
On request
If you are pursuing MISUMI CJPGQD20-P[13-30/0.01]-L[10-40/1]-B[5-20/0.1], catch up with FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are years of experience, which are described in the quality of merchandises and special attention to each buyer. We cherish everyone, who liased with us - hence, our regular consumers procure the most helpful purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such purchasers, and we constantly form new agreements. More than 700 contracts are concluded per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Hungary, Azerbaijan, United Arab Emirates, Burma, Chad, Serbia, Kazakhstan, Palestine, Equatorial Guinea, Philippines, Armenia, Belize, China, Grenada, Lithuania, Nigeria, Mongolia, Moldova, Bosnia and Herzegovina, Rwanda, Morocco, Kenya, Liberia, Croatia, The Gambia, Central African Republic, Madagascar, Ghana, Uzbekistan, Norway, East Timor, Tanzania, Mauritania, El Salvador, Andorra, Denmark, Jordan, Macedonia, Israel, Luxembourg, Senegal, New Zealand, Chile, Australia. A well-built logistics network and a partnership network let us to ship our products anywhere in the globe immediately without compromising product quality.
A special source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the direction of factory-made equipment.
All products from FAMAGA are verified - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is rising every day. We are pleased that consumers choose FAMAGA again and again, and we are pleased to make more advanced and technologically advanced industrial equipment so as stay in control.
To get some advice or order, contact us or send a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||
Circumference Groove | Notched | Set Screw Flat | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPGQ | JPCQ | JPDQ | S (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPGQ | GJPCQ | - | ||
EN 1.4301 Equiv. | - | - | SJPGQ | SJPCQ | - | ||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPGQ | - | - |
Part Number | - | P | - | L | - | B | - | G | - | A | - | Flat Position |
JPGQS10 SJPCQD8 | - - | P12.00 P5.05 | - - | L6 L15 | - - | B3.5 B10.1 | - | G4 | - | A8.0 | - | Y |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | d | 1 | 2 | C1 | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | When D | When DP | |||||||
JPGQ GJPGQ SJPGQ CJPGQ | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 2.00~10.00 | 3~12 | 2.0~20.0 | 4.5 | 5 | 5 | 1 | 3 | 1.5 |
6S | 2~12 | 2 | 0.5 | |||||||||
8 | -0.005 -0.014 | 3.00~13.00 | 4~16 | 6.5 | 6 | 6 | 1.5 | 3.5 | 1.8 | |||
8S | 3~16 | 3 | 0.5 | |||||||||
10 | 3.00~15.00 | 5~20 | 3.0~20.0 | 8 | 8 | 8 | 2 | 4 | 2.2 | |||
10S | 4~20 | 3 | 0.5 | |||||||||
12 | -0.006 -0.017 | 5.00~16.00 | 6~24 | 10 | 8 | 2 | 5 | 2.5 | ||||
12S | 5~24 | 4 | 0.5 | |||||||||
16 | 10.00~25.00 | 8~32 | 5.0~20.0 | 14 | 8 | 3 | 7 | 4 | ||||
16S | 7~32 | 4 | 0.5 | |||||||||
20 | -0.007 -0.020 | 13.00~30.00 | 10~40 | 18 | 8 | 3 | 9 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | G 1mm Increment | A 0.1mm Increment | Flat Position | 3 | 4 | h | C | Applicable Set Screw | * Tightening Torque Ncm | (W) | |||||
Type | Shape | D | D dim. Tolerance g6 | When D | When DP | |||||||||||||
(Notched) JPCQ GJPCQ SJPCQ | (Set Screw Flat) JPDQ | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 5.00~10.00 | 12~20 | 5.0~20.0 | 3~9 | 2.0~8.0 | X Y Applicable to Diamond Shape Type only. | 5.5 | 2.5 | 1 | 1 | M4 | 333 | 3 | 1.5 |
8 | -0.005 -0.014 | 5.00~13.00 | 14~22 | 2.0~12.0 | 7.5 | 3.5 | 1.2 | 1.5 | M5 | 676 | 3.5 | 1.8 | ||||||
10 | 5.00~15.00 | 15~25 | 2.0~16.0 | 2 | M6 | 1156 | 4 | 2.2 | ||||||||||
12 | -0.006 -0.017 | 5.00~16.00 | 15~25 | 2.0~20.0 | 5 | 2.5 | ||||||||||||
16 | 10.00~25.00 | 24~35 | 2.0~28.0 | 10.5 | 5.5 | 2 | 3 | M8 | 2803 | 7 | 4 | |||||||
20 | -0.007 -0.020 | 13.00~30.00 | 27~40 | 2.0~36.0 | 13.5 | 8.5 | 9 | 5 |