We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
JPSTA20-P[13-20/0.01]
Description
Small Head/Tapped/P Configurable
Stock availability:
On request
If you are pursuing MISUMI JPSTA20-P[13-20/0.01], communicate with FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of goods and special attention to each buyer. We cherish everyone, who liased with us - so, our regular customers accept the most convenient purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4 thousand such consumers, and we constantly form new agreements. More than 650 contracts are concluded per day, because FAMAGA operates all over the world Germany, United Kingdom, Suriname, Togo, Argentina, Cyprus, Czech Republic, Zimbabwe, Laos, South Korea, China, Hungary, Afghanistan, Honduras, Poland, Seychelles, Netherlands, Yemen, Dominica, The Bahamas, Guatemala, Panama, Zambia, Nigeria, El Salvador, Bosnia and Herzegovina, Tajikistan, Ecuador, Vietnam, Ireland, Croatia, United States, Australia, India, Pakistan, Botswana, Estonia, Burundi, Mauritania, Sweden, Kyrgyzstan, Georgia, Morocco, Andorra. A advanced logistics chains and a partnership network cheer us to conduct our products anywhere in the planet on-time without compromising product quality.
A particular source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All outcomes from FAMAGA are assured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this bulk is rising every day. We are pleased that purchasers choose FAMAGA again and again, and we are pleased to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To inquire or place an order, get in touch with us or send a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPS | TB (Round) | JPS | TA (Round) TD (Diamond) | FPS | TA (Round) TD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPS | GFPS | ||||
EN 1.4301 Equiv.* | - | - | SJPS | SJPS | SFPS | ||||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Plating Hardness: 750HV ~ | - | - | HFPS | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPS | - | CFPS |
Part Number | - | P | - | L | - | B | ||||
Type | Shape | D | ||||||||
JPS | TA | 6 | - | P4.50 | ||||||
FPS | TA | 10 | - | P8.52 | - | L12 | - | B6.4 |
Part Number | P Selection | L | B | m | M (Coarse) | * Tightening Torque Ncm | ||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||
JPS SJPS CJPS | TB (Round) | 6 | -0.004 -0.012 | 4 | 5 | 10 | 5 | 2 | M3 | 147 | 5 | |||||||
8 | -0.005 -0.014 | 6 | 7 | 15 | 6 | 3 | M5 | 676 | 8 | |||||||||
10 | 7 | 8 | 9 | 10 | 8 | |||||||||||||
12 | -0.006 -0.017 | 8 | 9 | 10 | 11 | 12 |
Part Number | P 0.01mm Increment | L | B | m | (W) | M (Coarse) | * Tightening Torque Ncm | ||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
JPS GJPS SJPS | TA (Round) TD (Diamond) | 5 | -0.004 -0.012 | 3.00~5.00 | 10 | 5 | 2 | 1.2 | M2 | - | 3 |
6 | 4.00~6.00 | 1.5 | M3 | 147 | 5 | ||||||
6T | M2.6 | - | 4 | ||||||||
8 | -0.005 -0.014 | 6.00~8.00 | 15 | 6 | 3 | 1.8 | M5 | 676 | 8 | ||
8T | M4 | 333 | 6 | ||||||||
10 | 7.00~10.00 | 8 | 2.2 | M5 | 676 | 8 | |||||
12 | -0.006 -0.017 | 7.00~12.00 | 2.5 | ||||||||
13 | 8.00~13.00 | 22 | 4 | 3 | M8 | 2803 | 12 | ||||
16 | 10.00~16.00 | 10 | 4 | ||||||||
20 | -0.007 -0.020 | 13.00~20.00 | 30 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | (W) | M (Coarse) | * Tightening Torque Ncm | ||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FPS GFPS SFPS HFPS CFPS | TA (Round) TD (Diamond) | 5 | -0.004 -0.012 | 3.00~5.00 | 8~10 | 2.0~10.0 | 2 | 1.2 | M2 | - | 3 |
6 | 4.00~6.00 | 8(9)~12 | 2.0~12.0 | 1.5 | M3 | 147 | 5 | ||||
6T | M2.6 | - | 4 | ||||||||
8 | -0.005 -0.014 | 6.00~8.00 | 11(12)~16 | 2.0~15.0 | 3 | 1.8 | M5 | 676 | 8 | ||
8T | M4 | 333 | 6 | ||||||||
10 | 7.00~10.00 | 11(12)~20 | 3.0~20.0 | 2.2 | M5 | 676 | 8 | ||||
10T | 8(12)~16 | M4 | 333 | 6 | |||||||
12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | 3.0~20.0 | 2.5 | M5 | 676 | 8 | |||
12T | 8(12)~18 | M4 | 333 | 6 | |||||||
13 | 8.00~13.00 | 13(14)~26 | 5.0~20.0 | 4 | 3 | M8 | 2803 | 10 | |||
13T | 10(14)~20 | M6 | 1156 | 9 | |||||||
16 | 10.00~16.00 | 16~32 | 5.0~20.0 | 4 | M8 | 2803 | 12 | ||||
16T | 10(14)~24 | M6 | 1156 | 9 | |||||||
20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | 5.0~20.0 | 5 | M8 | 2803 | 12 | |||
20T | 12(18)~30 | M6 | 1156 | 9 |