We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for MISUMI JPDPA1-2, contact FAMAGA, the world's dominant provider of industrialized equipment. Our company has lasted for more than ten years - these are years of experience, which are described in the quality of goods and particular attention to each purchaser. We praise everyone, who liased with us - thus, our regular consumers pick up the most acceptable purchase terms and discounts on the manufacturing equipment market. Nowadays, there are more than 4000 such customers, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Barbados, Spain, Austria, Zambia, Kazakhstan, Saudi Arabia, Palestine, China, Paraguay, Syria, Rwanda, Uganda, Mali, Mauritania, Liberia, Tonga, Zimbabwe, Lebanon, Togo, Argentina, Cameroon, Antigua and Barbuda, Serbia, Algeria, Uruguay, Peru, Laos, Montenegro, Uzbekistan, Kiribati, Comoros, Liechtenstein, Estonia, Central African Republic, Azerbaijan, Belize, Sudan, Czech Republic, Andorra, Namibia, Brazil, Djibouti, Ghana, Iran, Slovakia, Australia. A advanced logistics series and a partnership network let us to deliver our items anywhere in the earth immediately without discrediting product quality.
A special source of repute for FAMAGA is its personnel, each of whom contributes to our work. We accept into our team only experts, who already have experience in the range of manufacturing equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been provided, and this number is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are eager to make more exceptional and technologically modern industrial equipment so as stay in control.
To get some advice or place an order, get in touch with us or send a message to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | D Tol. | Type | D Tol. | Type | D Tol. | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JP | DA (m6) DPA (p6) | JP | DC (m6) DPC (p6) | FP | DC (m6) DPC (p6) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJP | GJP | GFP | ||||
EN 1.2510 Equiv. | - | - | BJP | BJP | BFP | ||||
EN 1.4301 Equiv.* | - | - | SJP | SJP | SFP | ||||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HJP | HJP | HFP | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJP | CJP | CFP |
Part Number | - | P | - | L | - | B | ||||
Type | D Tol. | D | ||||||||
JP | DA | 8 | - | 12 | ||||||
SJP | DPC | 10 | - | 14.01 | ||||||
CFP | DC | 12 | - | P15.97 | - | L12 | - | B3.5 |
P | h6 |
1.50~3.00 | 0 -0.006 |
3.01~6.00 | 0 -0.008 |
6.01~10.00 | 0 -0.009 |
10.01~18.00 | 0 -0.011 |
18.01~30.00 | 0 -0.013 |
Part Number | P Selection | L | B | C | |||||
Type | D Tol. | D | d dim. Tolerance | ||||||
m6 | p6 | ||||||||
JP GJP BJP SJP HJP CJP | DA (m6) DPA (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 2 | 3 | 2 | 0 | 0.1 |
2 | 3 | 4 | 0.5 | ||||||
3 | 5 | 5 | 3 | 1 | 1 | ||||
4 | +0.012 +0.004 | +0.020 +0.012 | 6, 8 | ||||||
5 | 8 | 8 | 4 | ||||||
6 | 8, 10 | 10 | 5 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 12 | 12 | 6 | 2 | 1.5 | ||
10 | 12, 14 | 16 | 10 | 2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 16 | 20 | 20 | ||||
13 | 18 | 22 | 22 | ||||||
16 | 25 | 24 | 25 | 3 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 30 | 32 | 30 |
Part Number | P 0.01mm Increment | L | B | C | |||||
Type | D Tol. | D | d dim. Tolerance | ||||||
m6 | p6 | ||||||||
JP GJP BJP SJP HJP CJP | DC (m6) DPC (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.50 | 3 | 2 | 0 | 0.1 |
2 | 2.50~4.00 | 4 | 0.5 | ||||||
3 | 3.50~6.00 | 5 | 3 | 1 | 1 | ||||
4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | ||||||
5 | 5.50~8.00 | 8 | 4 | ||||||
6 | 6.50~10.00 | 10 | 5 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 12 | 6 | 2 | 1.5 | ||
10 | 11.00~15.00 | 16 | 10 | 2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 20 | 20 | ||||
13 | 14.00~18.00 | 22 | 22 | ||||||
16 | 17.00~25.00 | 24 | 25 | 3 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 32 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | |||||
Type | D Tol. | D | d dim. Tolerance | ||||||
m6 | p6 | ||||||||
FP GFP BFP SFP HFP CFP | DC (m6) DPC (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.50 | 2, 3 | 2.0~5.0 | 0 | 0.1 |
2 | 2.50~4.00 | 2~6 | 2.0~10.0 | 0.5 | |||||
3 | 3.50~6.00 | 3~6 | 2.0~10.0 | 1 | 1 | ||||
4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | 4~8 | 2.0~10.0 | ||||
5 | 5.50~8.00 | 5~10 | 2.0~10.0 | ||||||
6 | 6.50~10.00 | 6~12 | 2.0~12.0 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 8~16 | 2.0~15.0 | 2 | 1.5 | ||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | 2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 12~24 | 3.0~20.0 | ||||
13 | 14.00~18.00 | 13~26 | 5.0~20.0 | ||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 3 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 20~40 | 5.0~20.0 |