We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
HJPDA5-8
Description
Large Flat Head/Standard/P Standard
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing MISUMI HJPDA5-8, make contact with FAMAGA, the world's chief distributor of industrialized equipment. Our company has advanced for more than ten years - these are years of experience, which are described in the quality of merchandises and special attention to each buyer. We respect everyone, who cooperated with us - therefore, our regular purchasers get the most acceptable purchase terms and discounts on the manufacturing equipment market. Nowadays, there are more than 4000 such clients, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Eswatini, Spain, Romania, Iraq, Georgia, Liberia, Mali, Sweden, Monaco, Saudi Arabia, Cyprus, Myanmar, Ghana, India, Morocco, Grenada, Paraguay, Czech Republic, Mauritius, Iceland, Antigua and Barbuda, Jordan, Djibouti, Bolivia, Turkmenistan, Costa Rica, Algeria, Fiji, Tanzania, Brazil, Uruguay, Slovakia, Syria, Finland, Chile, Israel, Argentina, United Arab Emirates, Montenegro, Angola, Cameroon, Suriname, Armenia, Samoa, Andorra, Botswana. A well-shaped logistics system and a partnership network let us to send our items anywhere in the earth immediately without disreputing product quality.
A particular source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of manufacturing equipment.
All items from FAMAGA are assured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been provided, and this number is increasing every day. We are proud that customers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically innovative industrial equipment so as not to lower the bar.
To request or book, get in touch with us or send a message to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
| Type | D Tol. | Type | D Tol. | Type | D Tol. | ||||
| EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JP | DA (m6) DPA (p6) | JP | DC (m6) DPC (p6) | FP | DC (m6) DPC (p6) | |
| EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJP | GJP | GFP | ||||
| EN 1.2510 Equiv. | - | - | BJP | BJP | BFP | ||||
| EN 1.4301 Equiv.* | - | - | SJP | SJP | SFP | ||||
| EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HJP | HJP | HFP | ||||
| EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJP | CJP | CFP |
| Part Number | - | P | - | L | - | B | ||||
| Type | D Tol. | D | ||||||||
| JP | DA | 8 | - | 12 | ||||||
| SJP | DPC | 10 | - | 14.01 | ||||||
| CFP | DC | 12 | - | P15.97 | - | L12 | - | B3.5 |
| P | h6 |
| 1.50~3.00 | 0 -0.006 |
| 3.01~6.00 | 0 -0.008 |
| 6.01~10.00 | 0 -0.009 |
| 10.01~18.00 | 0 -0.011 |
| 18.01~30.00 | 0 -0.013 |
| Part Number | P Selection | L | B | C | |||||
| Type | D Tol. | D | d dim. Tolerance | ||||||
| m6 | p6 | ||||||||
| JP GJP BJP SJP HJP CJP | DA (m6) DPA (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 2 | 3 | 2 | 0 | 0.1 |
| 2 | 3 | 4 | 0.5 | ||||||
| 3 | 5 | 5 | 3 | 1 | 1 | ||||
| 4 | +0.012 +0.004 | +0.020 +0.012 | 6, 8 | ||||||
| 5 | 8 | 8 | 4 | ||||||
| 6 | 8, 10 | 10 | 5 | ||||||
| 8 | +0.015 +0.006 | +0.024 +0.015 | 12 | 12 | 6 | 2 | 1.5 | ||
| 10 | 12, 14 | 16 | 10 | 2 | |||||
| 12 | +0.018 +0.007 | +0.029 +0.018 | 16 | 20 | 20 | ||||
| 13 | 18 | 22 | 22 | ||||||
| 16 | 25 | 24 | 25 | 3 | |||||
| 20 | +0.021 +0.008 | +0.035 +0.022 | 30 | 32 | 30 |
| Part Number | P 0.01mm Increment | L | B | C | |||||
| Type | D Tol. | D | d dim. Tolerance | ||||||
| m6 | p6 | ||||||||
| JP GJP BJP SJP HJP CJP | DC (m6) DPC (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.50 | 3 | 2 | 0 | 0.1 |
| 2 | 2.50~4.00 | 4 | 0.5 | ||||||
| 3 | 3.50~6.00 | 5 | 3 | 1 | 1 | ||||
| 4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | ||||||
| 5 | 5.50~8.00 | 8 | 4 | ||||||
| 6 | 6.50~10.00 | 10 | 5 | ||||||
| 8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 12 | 6 | 2 | 1.5 | ||
| 10 | 11.00~15.00 | 16 | 10 | 2 | |||||
| 12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 20 | 20 | ||||
| 13 | 14.00~18.00 | 22 | 22 | ||||||
| 16 | 17.00~25.00 | 24 | 25 | 3 | |||||
| 20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 32 | 30 |
| Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | |||||
| Type | D Tol. | D | d dim. Tolerance | ||||||
| m6 | p6 | ||||||||
| FP GFP BFP SFP HFP CFP | DC (m6) DPC (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.50 | 2, 3 | 2.0~5.0 | 0 | 0.1 |
| 2 | 2.50~4.00 | 2~6 | 2.0~10.0 | 0.5 | |||||
| 3 | 3.50~6.00 | 3~6 | 2.0~10.0 | 1 | 1 | ||||
| 4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | 4~8 | 2.0~10.0 | ||||
| 5 | 5.50~8.00 | 5~10 | 2.0~10.0 | ||||||
| 6 | 6.50~10.00 | 6~12 | 2.0~12.0 | ||||||
| 8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 8~16 | 2.0~15.0 | 2 | 1.5 | ||
| 10 | 11.00~15.00 | 10~20 | 3.0~20.0 | 2 | |||||
| 12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 12~24 | 3.0~20.0 | ||||
| 13 | 14.00~18.00 | 13~26 | 5.0~20.0 | ||||||
| 16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 3 | |||||
| 20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 20~40 | 5.0~20.0 |
