We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
CFPDPC5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1]
Description
Large Flat Head/Standard/P Standard
Stock availability:
On request
If you are looking for MISUMI CFPDPC5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1], call FAMAGA, the world's chief distributor of factory-made equipment. Our company has existed for more than ten years - these are years of experience, which are illustrated in the quality of products and personalseparate attention to each client. We appreciate everyone, who conspired with us - hence, our regular buyers obtain the most acceptable purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such consumers, and we constantly compose new agreements. More than 750 contracts are concluded per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Samoa, Philippines, Kyrgyzstan, Singapore, France, Kenya, Ireland, Norway, Malawi, Latvia, El Salvador, Equatorial Guinea, Guinea, Kiribati, Gambia, Liberia, Australia, Slovakia, Turkey, Argentina, Serbia, Niger, Azerbaijan, Iceland, Indonesia, Antigua and Barbuda, Pakistan, Fiji, Tonga, Eswatini, Cameroon, New Zealand, Laos, Kazakhstan, Senegal, Mauritania, Bosnia and Herzegovina, Qatar, Uruguay, Vietnam. A well-elaborated logistics link and a partnership network let us to dispatch our products anywhere in the globe immediately without undermining product quality.
A special source of honor for FAMAGA is its workers, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the direction of factory-made equipment.
All items from FAMAGA are assured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been provided, and this quantity is growing every day. We are pleased that buyers choose FAMAGA again and again, and we are pleased to make more progressive and technologically innovative industrial equipment so as not to lower the bar.
To consult or book, contact us or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | D Tol. | Type | D Tol. | Type | D Tol. | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JP | DA (m6) DPA (p6) | JP | DC (m6) DPC (p6) | FP | DC (m6) DPC (p6) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJP | GJP | GFP | ||||
EN 1.2510 Equiv. | - | - | BJP | BJP | BFP | ||||
EN 1.4301 Equiv.* | - | - | SJP | SJP | SFP | ||||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HJP | HJP | HFP | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJP | CJP | CFP |
Part Number | - | P | - | L | - | B | ||||
Type | D Tol. | D | ||||||||
JP | DA | 8 | - | 12 | ||||||
SJP | DPC | 10 | - | 14.01 | ||||||
CFP | DC | 12 | - | P15.97 | - | L12 | - | B3.5 |
P | h6 |
1.50~3.00 | 0 -0.006 |
3.01~6.00 | 0 -0.008 |
6.01~10.00 | 0 -0.009 |
10.01~18.00 | 0 -0.011 |
18.01~30.00 | 0 -0.013 |
Part Number | P Selection | L | B | C | |||||
Type | D Tol. | D | d dim. Tolerance | ||||||
m6 | p6 | ||||||||
JP GJP BJP SJP HJP CJP | DA (m6) DPA (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 2 | 3 | 2 | 0 | 0.1 |
2 | 3 | 4 | 0.5 | ||||||
3 | 5 | 5 | 3 | 1 | 1 | ||||
4 | +0.012 +0.004 | +0.020 +0.012 | 6, 8 | ||||||
5 | 8 | 8 | 4 | ||||||
6 | 8, 10 | 10 | 5 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 12 | 12 | 6 | 2 | 1.5 | ||
10 | 12, 14 | 16 | 10 | 2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 16 | 20 | 20 | ||||
13 | 18 | 22 | 22 | ||||||
16 | 25 | 24 | 25 | 3 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 30 | 32 | 30 |
Part Number | P 0.01mm Increment | L | B | C | |||||
Type | D Tol. | D | d dim. Tolerance | ||||||
m6 | p6 | ||||||||
JP GJP BJP SJP HJP CJP | DC (m6) DPC (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.50 | 3 | 2 | 0 | 0.1 |
2 | 2.50~4.00 | 4 | 0.5 | ||||||
3 | 3.50~6.00 | 5 | 3 | 1 | 1 | ||||
4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | ||||||
5 | 5.50~8.00 | 8 | 4 | ||||||
6 | 6.50~10.00 | 10 | 5 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 12 | 6 | 2 | 1.5 | ||
10 | 11.00~15.00 | 16 | 10 | 2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 20 | 20 | ||||
13 | 14.00~18.00 | 22 | 22 | ||||||
16 | 17.00~25.00 | 24 | 25 | 3 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 32 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | |||||
Type | D Tol. | D | d dim. Tolerance | ||||||
m6 | p6 | ||||||||
FP GFP BFP SFP HFP CFP | DC (m6) DPC (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.50 | 2, 3 | 2.0~5.0 | 0 | 0.1 |
2 | 2.50~4.00 | 2~6 | 2.0~10.0 | 0.5 | |||||
3 | 3.50~6.00 | 3~6 | 2.0~10.0 | 1 | 1 | ||||
4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | 4~8 | 2.0~10.0 | ||||
5 | 5.50~8.00 | 5~10 | 2.0~10.0 | ||||||
6 | 6.50~10.00 | 6~12 | 2.0~12.0 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 8~16 | 2.0~15.0 | 2 | 1.5 | ||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | 2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 12~24 | 3.0~20.0 | ||||
13 | 14.00~18.00 | 13~26 | 5.0~20.0 | ||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 3 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 20~40 | 5.0~20.0 |