We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
ANS5-30
Description
Adjusting Stopper Screws/Wrench Flat/L Selectable/Fine Thread
Stock availability:
On request
If you are inspecting MISUMI ANS5-30, reach FAMAGA, the world's top supplier of manufacturing equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of products and particular attention to each consumer. We admire everyone, who collaborated with us - therefore, our regular purchasers pick up the most favorable purchase conditions and discounts on the manufacturing equipment market. At present, there are more than 3500 such buyers, and we constantly arrange new agreements. More than 650 purchases are terminated per day, because FAMAGA supplies all over the world Germany, United Kingdom, Sweden, Kyrgyzstan, Latvia, Ireland, Sri Lanka, East Timor, Tonga, Mexico, Singapore, Cuba, Nicaragua, Cameroon, Ghana, Netherlands, Turkey, Dominica, Eswatini, Djibouti, Paraguay, The Bahamas, Fiji, Macedonia, Mongolia, Malaysia, Georgia, Qatar, Iceland, Seychelles, Gambia, Luxembourg, Cyprus, South Korea, Bolivia, Benin, Hungary, Egypt, Estonia, Mauritius, Cape Verde, Pakistan, Kiribati, Kuwait, Zimbabwe, Swaziland, Tanzania. A well-elaborated logistics connection and a partnership network assist us to conduct our products anywhere in the planet promptly without damaging product quality.
A specific source of honor for FAMAGA is its staff members, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the direction of manufacturing equipment.
All products from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is amounting every day. We are pleased that buyers choose FAMAGA again and again, and we are glad to make more advanced and technologically innovative industrial equipment so as keep on top of it.
To ask a question or place an order, get in touch with us or write to the online chat on our official website. You can also forward a list of the necessary equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Adjusting Stopper | Wrench Flats | Material | Hardness* | Surface Treatment | Accessory (Nut 1 pc.) | |
Material | Surface Treatment | |||||
Fine | ANS | EN 1.1191 Equiv. | 45~50HRC | Trivalent Chromate | EN 1.0038 Equiv. | Trivalent Chromate |
SANS | EN 1.4031 Equiv. | 45HRC~ | - | EN 1.4301 Equiv. | - | |
Coarse | ANSN | EN 1.1191 Equiv. | 45~50HRC | Trivalent Chromate | EN 1.0038 Equiv. | Trivalent Chromate |
SANSN | EN 1.4031 Equiv. | 45HRC~ | - | EN 1.4301 Equiv. | - |
Part Number | - | L |
ANS6 SANSN10 | - - | 60 50 |
M | MxPitch | A | 1 | SR | B | (C) | T | |
Fine | Coarse | |||||||
3 | 3x0.35 | 3x0.5 | 2.5 | 4 | 3 | 5.5 | 6.4 | 2.4 |
4 | 4x0.5 | 4x0.7 | 3 | 4 | 7 | 8.1 | 4 | |
5 | 5x0.5 | 5x0.8 | 4 | 5 | 8 | 9.2 | ||
6 | 6x0.75 | 6x1.0 | 5 | 5 | 6 | 10 | 11.5 | |
8 | 8x0.75 | 8x1.25 | 6 | 6 | 8 | 13 | 15 | 5 |
10 | 10x1.0 | 10x1.5 | 8 | 8 | 10 | 17 | 19.6 | 6 |
12 | 12x1.0 | 12x1.75 | 10 | 10 | 12 | 19 | 21.9 | |
16 | 16x1.5 | 16x2.0 | 14 | 14 | 16 | 24 | 27.7 | 8 |
20 | 20x1.5 | 20x2.5 | 17 | 17 | 20 | 30 | 34.6 | 10 |
Part Number | L Selection | ANS, ANSN | SANS, SANSN | |||||||||||||||
Type | M | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | |||||||||||||
1 ~ 49 pc(s). | 50 ~ 100 pcs. | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | |||||||||||||||
(Fine) ANS SANS (Coarse) ANSN SANSN | 3 | 15 | 20 | 25 | 30 | 35 | 40 | |||||||||||
4 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||
5 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||
6 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||||||||
8 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||||
10 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | |||||||||||
12 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | |||||||||||
16 | 40 | 45 | 50 | 60 | 70 | 80 | 100 | |||||||||||
20 | 45 | 50 | 60 | 70 | 80 | 100 | 120 |