We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
HANB8-50
Description
Adjusting Stopper Screws/L Selectable/Fine Thread
Stock availability:
On request
If you are questing MISUMI HANB8-50, catch up with FAMAGA, the world's primary vendor of industrial equipment. Our company has advanced for more than ten years - these are ages of experience, which are expressed in the quality of products and individual attention to each customer. We respect everyone, who engaged with us - so, our regular clients procure the most favorable purchase terms and discounts on the machine made streamlined equipment market. At this moment, there are more than 4500 such clients, and we constantly form new agreements. More than 700 agreements are achieved per day, because FAMAGA works all over the planet Germany, United Kingdom, The Bahamas, Belize, Honduras, Chad, Dominican Republic, Switzerland, Ghana, Liberia, Singapore, Djibouti, Egypt, Paraguay, Botswana, Philippines, Senegal, Nicaragua, Suriname, The Gambia, Mauritania, New Zealand, Vietnam, Equatorial Guinea, Latvia, Seychelles, Madagascar, Sudan, Moldova, East Timor, Kiribati, Indonesia, Malta, Nepal, Russia, Croatia, Jamaica, Syria, Ireland, Dominica, El Salvador, Uruguay, Israel, Finland, Turkey. A well-shaped logistics system and a partnership network guide us to deliver our goods anywhere in the earth quickly without compromising product quality.
A special source of honor for FAMAGA is its workers, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the range of factory-made equipment.
All products from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been supplied, and this quantity is increasing every day. We are happy that purchasers choose FAMAGA again and again, and we are happy to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To ask a question or order, contact us or write to the online chat on our site. You can also direct a list of the necessary equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Adjusting Stopper | Type | Material | Hardness* | Surface Treatment | Accessory (Nut 1 pc.) | |
Material | Surface Treatment | |||||
Fine | HANS | EN 1.1191 Equiv. | 45~50HRC | Trivalent Chromate | EN 1.0038 Equiv. | Trivalent Chromate |
SHANS | EN 1.4031 Equiv. | 45HRC~ | - | EN 1.4301 Equiv. | - | |
Coarse | HANB | EN 1.1191 Equiv. | 45~50HRC | Trivalent Chromate | EN 1.0038 Equiv. | Trivalent Chromate |
SHANB | EN 1.4031 Equiv. | 45HRC~ | - | EN 1.4301 Equiv. | - |
Part Number | - | L |
HANS6 ANH4 | - - | 30 20 |
Part Number | L Selection | MxPitch | B1 | E | D | SR | t | B | (C) | T | HANS, HANB | SHANS, SHANB | |||||||||||
Type | M | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | ||||||||||||||||||
Fine | Coarse | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | ||||||||||||||||||
(Fine) HANS SHANS (Coarse) HANB SHANB | 4 | 15 | 20 | 25 | 30 | 4x0.5 | 4x0.7 | 2 | 2.2 | 4 | 3 | 4 | 2.5 | 7 | 8.1 | 4 | |||||||
5 | 15 | 20 | 25 | 30 | 40 | 5x0.5 | 5x0.8 | 2.5 | 2.8 | 4 | 4 | 5 | 3 | 8 | 9.2 | ||||||||
6 | 20 | 25 | 30 | 40 | 50 | 6x0.75 | 6x1.0 | 3 | 3 | 5 | 4.5 | 6 | 3 | 10 | 11.5 | ||||||||
8 | 25 | 30 | 40 | 50 | 8x0.75 | 8x1.25 | 4 | 4 | 6 | 6 | 8 | 4 | 13 | 15 | 5 | ||||||||
10 | 30 | 40 | 50 | 60 | 10x1.0 | 10x1.5 | 5 | 5 | 8 | 8 | 10 | 6 | 17 | 19.6 | 6 | ||||||||
12 | 40 | 50 | 60 | 12x1.0 | 12x1.75 | 6 | 6 | 10 | 9 | 12 | 7 | 19 | 21.9 |