We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
ANFBN3-[10-40/1]
Description
Adjusting Stopper Screws/Hexagon Socket/L Configurable/Fine Thread
Stock availability:
On request
If you are looking for MISUMI ANFBN3-[10-40/1], reach FAMAGA, the world's primary vendor of factory-made equipment. Our company has operated for more than ten years - these are ages of experience, which are outlined in the quality of merchandises and special attention to each purchaser. We value everyone, who cooperated with us - therefore, our regular purchasers procure the most helpful purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 4500 such purchasers, and we constantly make new agreements. More than 600 transactions are made per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Djibouti, Colombia, Antigua and Barbuda, Papua New Guinea, South Sudan, Portugal, Zimbabwe, Bolivia, Senegal, Seychelles, Bhutan, East Timor, Fiji, Burma, Ireland, Mali, Dominica, Slovakia, Azerbaijan, Haiti, Japan, Chile, The Gambia, Romania, Monaco, Norway, Malaysia, Zambia, Latvia, Ecuador, Pakistan, Syria, China, Indonesia, Jamaica, Samoa, Comoros, Turkey, Brunei, Belarus, Burkina Faso, Madagascar, Israel, Qatar, Iceland, Panama, Hungary. A well-elaborated logistics bond and a partnership network guide us to conduct our goods anywhere in the world with no delay without discrediting product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the range of factory-made equipment.
All goods from FAMAGA are verified - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this bulk is amounting every day. We are happy that buyers choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as to stay on the top.
To inquire or order, phone us or write to the online chat on our site. You can also send a list of the needful equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Adjusting Stopper | Hex Socket Type | Material | Hardness* | Surface Treatment | Accessory (Nut 1 pc.) | ||
L Selectable | L Configurable | Material | Surface Treatment | ||||
Fine | ANBM | - | EN 1.1191 Equiv. | 45~50HRC | Electroless Nickel Plating | EN 1.0038 Equiv. | Trivalent Chromate |
ANB | ANFB | Trivalent Chromate | |||||
ANBH | ANFBH | EN 1.7220 Equiv. | 50HRC~ | ||||
ANBS | ANFBS | EN 1.4301 Equiv. | - | - | EN 1.4301 Equiv. | - | |
SANB | SANFB | EN 1.4031 Equiv. | 45HRC~ | - | |||
Coarse | ANBNM | - | EN 1.1191 Equiv. | 45~50HRC | Electroless Nickel Plating | EN 1.0038 Equiv. | Trivalent Chromate |
ANBN | ANFBN | Trivalent Chromate | |||||
ANBNH | ANFBNH | EN 1.7220 Equiv. | 50HRC~ | ||||
ANBNS | ANFBNS | EN 1.4301 Equiv. | - | - | EN 1.4301 Equiv. | - | |
SANBN | SANFBN | EN 1.4031 Equiv. | 45HRC~ | - |
Part Number | - | L |
ANB8 ANBM5 | - - | 40 30 |
M | MxPitch | B1 | SR | B | (C) | T | ||
Fine | Coarse | |||||||
3 | 3x0.35 | 3x0.5 | 1.5 | 1.5 | 3 | 5.5 | 6.4 | 2.4 |
4 | 4x0.5 | 4x0.7 | 2 | 2.2 | 4 | 7 | 8.1 | 4 |
5 | 5x0.5 | 5x0.8 | 2.5 | 2.8 | 5 | 8 | 9.2 | |
6 | 6x0.75 | 6x1.0 | 3 | 3 | 6 | 10 | 11.5 | |
8 | 8x0.75 | 8x1.25 | 4 | 4 | 8 | 13 | 15 | 5 |
10 | 10x1.0 | 10x1.5 | 5 | 5 | 10 | 17 | 19.6 | 6 |
12 | 12x1.0 | 12x1.75 | 6 | 6 | 12 | 19 | 21.9 | |
16 | 16x1.5 | 16x2.0 | 8 | 7 | 16 | 24 | 27.7 | 8 |
20 | 20x1.5 | 20x2.5 | 10 | 8 | 20 | 30 | 34.6 | 10 |
Part Number | L Selection | ANB, ANBN | ANBS, ANBNS | SANB, SANBN | ||||||||||||||||||
Type | M | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | |||||||||||||||
1 ~ 49 pc(s). | 50 ~ 100 pcs. | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | |||||||||||||||||
(Fine) ANB ANBS SANB (Coarse) ANBN ANBNS SANBN | 3 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | ||||||||||||||
4 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||||||||||
5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||||||||||
6 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||||||
8 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||||||||||||
10 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | |||||||||||
12 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | ||||||||||||
16 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 120 | |||||||||||||
20 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 120 |
Part Number | L Selection | Unit Price | Volume Discount Rate | ||||||||||
Type | M | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | ||||||||||
(Fine) ANBM (Coarse) ANBNM | 3 | 15 | 20 | 25 | |||||||||
4 | 15 | 20 | 25 | 30 | 35 | 40 | |||||||
5 | 15 | 20 | 25 | 30 | 35 | 40 | |||||||
6 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||
8 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||
10 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | ||||||
12 | 40 | 45 | 50 | 60 | 70 |
Part Number | L Selection | Unit Price | Volume Discount Rate | ||||||||||||
Type | M | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | ||||||||||||
(Fine) ANBH (Coarse) ANBNH | 3 | 20 | 25 | 30 | 35 | 40 | |||||||||
4 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||
5 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||
6 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||
8 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||
10 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | ||||||||
12 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | ||||||||
16 | 40 | 45 | 50 | 60 | 70 | 80 | 100 | ||||||||
20 | 45 | 50 | 60 | 70 | 80 | 100 | 120 |
Part Number | L 1mm Increment | Unit Price | ||||
Type | M | ANFB, ANFBN | ANFBH, ANFBNH | ANFBS, ANFBNS | SANFB, SANFBN | |
(Fine) ANFB ANFBH ANFBS SANFB (Coarse) ANFBN ANFBNH ANFBNS SANFBN | 3 | 10~40 | ||||
4 | 10~60 | |||||
5 | 10~60 | |||||
6 | 15~60 | |||||
8 | 15~60 | |||||
10 | 20~100 | |||||
12 | 30~100 | |||||
16 | 40~120 | |||||
20 | 40~120 |