We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
ANBN6-30
Description
Adjusting Stopper Screws/Hexagon Socket/L Configurable/Fine Thread
Stock availability:
On request
If you are seeking MISUMI ANBN6-30, call FAMAGA, the world's primary vendor of industrialized equipment. Our company has existed for more than ten years - these are cycles of experience, which are depicted in the quality of merchandises and personalseparate attention to each orderer. We admire everyone, who liased with us - so, our regular consumers procure the most convenient purchase conditions and discounts on the factory-made equipment market. Today, there are more than 4000 such customers, and we constantly compose new agreements. More than 750 affairs are settled per day, because FAMAGA works all over the earth Germany, United Kingdom, Lebanon, Chad, Iran, Cuba, Malawi, Portugal, Bolivia, Belarus, Namibia, Senegal, Grenada, Turkey, Australia, Ireland, Fiji, Gambia, Argentina, Ukraine, Liechtenstein, Jordan, Peru, Sudan, Egypt, Nigeria, India, Lithuania, Seychelles, Iraq, Djibouti, Malaysia, Kyrgyzstan, El Salvador, Mali, Thailand, Belize, Andorra, Bosnia and Herzegovina, Czech Republic, The Gambia, Norway, Malta, Paraguay, Dominica, Montenegro, Eswatini. A well-elaborated logistics link and a partnership network allow us to conduct our items anywhere in the world as soon as possible without undermining product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the range of manufacturing equipment.
All merchandises from FAMAGA are affirmed - we are responsible for the cause of our work. Now, more than 10 million units of products have been provided, and this number is growing every day. We are glad that purchasers choose FAMAGA again and again, and we are glad to make more exceptional and technologically innovative industrial equipment so as not to lower the bar.
To request or book, phone us or write to the online chat on our official website. You can also direct a list of the needful equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Adjusting Stopper | Hex Socket Type | Material | Hardness* | Surface Treatment | Accessory (Nut 1 pc.) | ||
L Selectable | L Configurable | Material | Surface Treatment | ||||
Fine | ANBM | - | EN 1.1191 Equiv. | 45~50HRC | Electroless Nickel Plating | EN 1.0038 Equiv. | Trivalent Chromate |
ANB | ANFB | Trivalent Chromate | |||||
ANBH | ANFBH | EN 1.7220 Equiv. | 50HRC~ | ||||
ANBS | ANFBS | EN 1.4301 Equiv. | - | - | EN 1.4301 Equiv. | - | |
SANB | SANFB | EN 1.4031 Equiv. | 45HRC~ | - | |||
Coarse | ANBNM | - | EN 1.1191 Equiv. | 45~50HRC | Electroless Nickel Plating | EN 1.0038 Equiv. | Trivalent Chromate |
ANBN | ANFBN | Trivalent Chromate | |||||
ANBNH | ANFBNH | EN 1.7220 Equiv. | 50HRC~ | ||||
ANBNS | ANFBNS | EN 1.4301 Equiv. | - | - | EN 1.4301 Equiv. | - | |
SANBN | SANFBN | EN 1.4031 Equiv. | 45HRC~ | - |
Part Number | - | L |
ANB8 ANBM5 | - - | 40 30 |
M | MxPitch | B1 | SR | B | (C) | T | ||
Fine | Coarse | |||||||
3 | 3x0.35 | 3x0.5 | 1.5 | 1.5 | 3 | 5.5 | 6.4 | 2.4 |
4 | 4x0.5 | 4x0.7 | 2 | 2.2 | 4 | 7 | 8.1 | 4 |
5 | 5x0.5 | 5x0.8 | 2.5 | 2.8 | 5 | 8 | 9.2 | |
6 | 6x0.75 | 6x1.0 | 3 | 3 | 6 | 10 | 11.5 | |
8 | 8x0.75 | 8x1.25 | 4 | 4 | 8 | 13 | 15 | 5 |
10 | 10x1.0 | 10x1.5 | 5 | 5 | 10 | 17 | 19.6 | 6 |
12 | 12x1.0 | 12x1.75 | 6 | 6 | 12 | 19 | 21.9 | |
16 | 16x1.5 | 16x2.0 | 8 | 7 | 16 | 24 | 27.7 | 8 |
20 | 20x1.5 | 20x2.5 | 10 | 8 | 20 | 30 | 34.6 | 10 |
Part Number | L Selection | ANB, ANBN | ANBS, ANBNS | SANB, SANBN | ||||||||||||||||||
Type | M | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | |||||||||||||||
1 ~ 49 pc(s). | 50 ~ 100 pcs. | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | |||||||||||||||||
(Fine) ANB ANBS SANB (Coarse) ANBN ANBNS SANBN | 3 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | ||||||||||||||
4 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||||||||||
5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||||||||||
6 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||||||
8 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||||||||||||
10 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | |||||||||||
12 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | ||||||||||||
16 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 120 | |||||||||||||
20 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 120 |
Part Number | L Selection | Unit Price | Volume Discount Rate | ||||||||||
Type | M | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | ||||||||||
(Fine) ANBM (Coarse) ANBNM | 3 | 15 | 20 | 25 | |||||||||
4 | 15 | 20 | 25 | 30 | 35 | 40 | |||||||
5 | 15 | 20 | 25 | 30 | 35 | 40 | |||||||
6 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||
8 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||
10 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | ||||||
12 | 40 | 45 | 50 | 60 | 70 |
Part Number | L Selection | Unit Price | Volume Discount Rate | ||||||||||||
Type | M | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | ||||||||||||
(Fine) ANBH (Coarse) ANBNH | 3 | 20 | 25 | 30 | 35 | 40 | |||||||||
4 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||
5 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||
6 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||
8 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||
10 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | ||||||||
12 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | ||||||||
16 | 40 | 45 | 50 | 60 | 70 | 80 | 100 | ||||||||
20 | 45 | 50 | 60 | 70 | 80 | 100 | 120 |
Part Number | L 1mm Increment | Unit Price | ||||
Type | M | ANFB, ANFBN | ANFBH, ANFBNH | ANFBS, ANFBNS | SANFB, SANFBN | |
(Fine) ANFB ANFBH ANFBS SANFB (Coarse) ANFBN ANFBNH ANFBNS SANFBN | 3 | 10~40 | ||||
4 | 10~60 | |||||
5 | 10~60 | |||||
6 | 15~60 | |||||
8 | 15~60 | |||||
10 | 20~100 | |||||
12 | 30~100 | |||||
16 | 40~120 | |||||
20 | 40~120 |