We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
ANBH8-30
Description
Adjusting Stopper Screws/Hexagon Socket/L Configurable/Fine Thread
Stock availability:
On request
If you are pursuing MISUMI ANBH8-30, catch up with FAMAGA, the world's principle retailer of factory-made equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of products and individual attention to each buyer. We cherish everyone, who cooperated with us - so, our regular buyers bring in the most flexible purchase terms and discounts on the factory-made equipment market. At this time, there are more than 4000 such clients, and we constantly arrange new agreements. More than 750 proceedings are resolved per day, because FAMAGA works all over the earth Germany, United Kingdom, Australia, Seychelles, Thailand, Kyrgyzstan, Guinea, Myanmar, Serbia, Armenia, South Korea, Turkey, Greece, Mozambique, Jordan, Brazil, Eswatini, East Timor, Austria, Tanzania, The Bahamas, Zambia, Gambia, Bangladesh, Sierra Leone, Andorra, Tonga, Croatia, Kenya, Argentina, Iran, North Korea, Israel, Ecuador, Moldova, Haiti, Nigeria, Afghanistan, Algeria, Tunisia, Mauritius, Hungary, Tajikistan, Denmark, Georgia, Czech Republic, Uruguay, Ghana, Panama. A well-developed logistics bond and a partnership network guide us to ship our units anywhere in the world on-time without damaging product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the field of manufacturing equipment.
All products from FAMAGA are verified - we are responsible for the cause of our work. Now, more than 10 million units of products have been provided, and this number is increasing every day. We are glad that customers choose FAMAGA again and again, and we are pleased to make more advanced and technologically innovative industrial equipment so as not to lower the bar.
To get some advice or book, phone us or send a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Adjusting Stopper | Hex Socket Type | Material | Hardness* | Surface Treatment | Accessory (Nut 1 pc.) | ||
L Selectable | L Configurable | Material | Surface Treatment | ||||
Fine | ANBM | - | EN 1.1191 Equiv. | 45~50HRC | Electroless Nickel Plating | EN 1.0038 Equiv. | Trivalent Chromate |
ANB | ANFB | Trivalent Chromate | |||||
ANBH | ANFBH | EN 1.7220 Equiv. | 50HRC~ | ||||
ANBS | ANFBS | EN 1.4301 Equiv. | - | - | EN 1.4301 Equiv. | - | |
SANB | SANFB | EN 1.4031 Equiv. | 45HRC~ | - | |||
Coarse | ANBNM | - | EN 1.1191 Equiv. | 45~50HRC | Electroless Nickel Plating | EN 1.0038 Equiv. | Trivalent Chromate |
ANBN | ANFBN | Trivalent Chromate | |||||
ANBNH | ANFBNH | EN 1.7220 Equiv. | 50HRC~ | ||||
ANBNS | ANFBNS | EN 1.4301 Equiv. | - | - | EN 1.4301 Equiv. | - | |
SANBN | SANFBN | EN 1.4031 Equiv. | 45HRC~ | - |
Part Number | - | L |
ANB8 ANBM5 | - - | 40 30 |
M | MxPitch | B1 | SR | B | (C) | T | ||
Fine | Coarse | |||||||
3 | 3x0.35 | 3x0.5 | 1.5 | 1.5 | 3 | 5.5 | 6.4 | 2.4 |
4 | 4x0.5 | 4x0.7 | 2 | 2.2 | 4 | 7 | 8.1 | 4 |
5 | 5x0.5 | 5x0.8 | 2.5 | 2.8 | 5 | 8 | 9.2 | |
6 | 6x0.75 | 6x1.0 | 3 | 3 | 6 | 10 | 11.5 | |
8 | 8x0.75 | 8x1.25 | 4 | 4 | 8 | 13 | 15 | 5 |
10 | 10x1.0 | 10x1.5 | 5 | 5 | 10 | 17 | 19.6 | 6 |
12 | 12x1.0 | 12x1.75 | 6 | 6 | 12 | 19 | 21.9 | |
16 | 16x1.5 | 16x2.0 | 8 | 7 | 16 | 24 | 27.7 | 8 |
20 | 20x1.5 | 20x2.5 | 10 | 8 | 20 | 30 | 34.6 | 10 |
Part Number | L Selection | ANB, ANBN | ANBS, ANBNS | SANB, SANBN | ||||||||||||||||||
Type | M | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | |||||||||||||||
1 ~ 49 pc(s). | 50 ~ 100 pcs. | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | |||||||||||||||||
(Fine) ANB ANBS SANB (Coarse) ANBN ANBNS SANBN | 3 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | ||||||||||||||
4 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||||||||||
5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||||||||||
6 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||||||
8 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||||||||||||
10 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | |||||||||||
12 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | ||||||||||||
16 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 120 | |||||||||||||
20 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 120 |
Part Number | L Selection | Unit Price | Volume Discount Rate | ||||||||||
Type | M | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | ||||||||||
(Fine) ANBM (Coarse) ANBNM | 3 | 15 | 20 | 25 | |||||||||
4 | 15 | 20 | 25 | 30 | 35 | 40 | |||||||
5 | 15 | 20 | 25 | 30 | 35 | 40 | |||||||
6 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||
8 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||
10 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | ||||||
12 | 40 | 45 | 50 | 60 | 70 |
Part Number | L Selection | Unit Price | Volume Discount Rate | ||||||||||||
Type | M | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | ||||||||||||
(Fine) ANBH (Coarse) ANBNH | 3 | 20 | 25 | 30 | 35 | 40 | |||||||||
4 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||
5 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||
6 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||
8 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||
10 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | ||||||||
12 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | ||||||||
16 | 40 | 45 | 50 | 60 | 70 | 80 | 100 | ||||||||
20 | 45 | 50 | 60 | 70 | 80 | 100 | 120 |
Part Number | L 1mm Increment | Unit Price | ||||
Type | M | ANFB, ANFBN | ANFBH, ANFBNH | ANFBS, ANFBNS | SANFB, SANFBN | |
(Fine) ANFB ANFBH ANFBS SANFB (Coarse) ANFBN ANFBNH ANFBNS SANFBN | 3 | 10~40 | ||||
4 | 10~60 | |||||
5 | 10~60 | |||||
6 | 15~60 | |||||
8 | 15~60 | |||||
10 | 20~100 | |||||
12 | 30~100 | |||||
16 | 40~120 | |||||
20 | 40~120 |