We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
LTBN-H200-[56-787/1]
Description
Long Timing Belts/Configurable No. of Teeth
Stock availability:
On request
If you are questing MISUMI LTBN-H200-[56-787/1], catch up with FAMAGA, the world's primary vendor of factory-made equipment. Our company has operated for more than ten years - these are cycles of experience, which are illustrated in the quality of items and individual attention to each orderer. We appreciate everyone, who cooperated with us - hence, our regular purchasers receive the most desirable purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 4500 such purchasers, and we constantly make new agreements. More than 600 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Ireland, Burundi, Belarus, Lithuania, Bosnia and Herzegovina, Norway, Malaysia, Antigua and Barbuda, Rwanda, Greece, Montenegro, United Arab Emirates, Austria, Albania, Chile, The Bahamas, Uzbekistan, Niger, Macedonia, Swaziland, Nigeria, Kiribati, Seychelles, Sweden, Ecuador, Mongolia, Kuwait, Tanzania, Madagascar, Mexico, Tunisia, Benin, Senegal, Equatorial Guinea, Iraq, Morocco, Brazil, Haiti, Denmark, Philippines, Kazakhstan, Algeria, New Zealand, Luxembourg. A well-built logistics chains and a partnership network cheer us to dispatch our products anywhere in the earth immediately without damaging product quality.
A particular source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All outputs from FAMAGA are ensured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this amount is increasing every day. We are pleased that customers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as stay in control.
To get some advice or place an order, phone us or send a message to the online chat on our site. You can also forward a list of the necessary equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Type | Type | Material | ||
Main Body | Core Wire | Cloth | ||
LTBJ | Standard | Polyurethane (for Joint Process) | T5, T10, L , H, S5M, S8M: Aramid Core Wire AT5, AT10: Steel Cord | - |
LTBN | Backside Cloth Lined | Nylon Cloth | ||
LTBR | Both Sides Cloth Lined |
Part Number | - | Number of Teeth | ||||
Type | Belt Type | Belt Nominal Width | ||||
LTBJ LTBR | - - | AT5 H | 150 200 | - - | 800 300 |
Belt Type | Pitch | 2θ() | H | h | i | L | Unit Mass g/m (Width: 10mm) | ||
Standard | Backside Cloth Lined | Both Sides Cloth Lined | |||||||
L | 9.525 | 40 | 3.6 | 1.91 | 1.69 | 3.25 | 29.1 | 28.8 | - |
H | 12.7 | 40 | 4.36 | 2.29 | 2.07 | 4.4 | 36.2 | 33.8 | - |
T5 | 5 | 40 | 2.2 | 1.2 | 1.0 | 1.8 | 19.0 | - | 20.0 |
T10 | 10 | 40 | 4.5 | 2.5 | 2.0 | 3.5 | 37.7 | 34.5 | 32.5 |
AT5 | 5 | 50 | 2.7 | 1.2 | 1.5 | 2.5 | 32.0 | - | - |
AT10 | 10 | 50 | 4.5 | 2.5 | 2.0 | 5.0 | 58.6 | - | - |
Belt Type | Pitch | Ra | Lr | H | h | i | Unit Mass g/m (Width: 10mm) |
Standard | |||||||
S5M | 5 | 3.25 | 3.25 | 3.31 | 1.81 | 1.5 | 29.0 |
S8M | 8 | 5.2 | 5.2 | 5.3 | 2.95 | 2.35 | 45.2 |
Belt Type Matching Material | Tooth Surface | Back Surface | ||
Cloth Lined | Standard | Cloth Lined | Standard | |
Steel | 0.34 | 0.65 | 0.29 | 0.75 |
Stainless Steel | 0.22 | 0.68 | 0.17 | 0.69 |
Aluminum | 0.19 | 0.42 | 0.15 | 0.50 |
UHMWPE | 0.18 | 0.31 | 0.17 | 0.32 |
Teflon | 0.12 | 0.21 | 0.12 | 0.28 |
Part Number | Number of Teeth Lower Limit ~ Upper Limit | Belt Width (mm) | Allowable Tension (N) | Body Price 1~5 pc(s). | Joint Process Charge (Body Price +) | |||||
Type | Belt Type | Belt Nominal Width | LTBJ | LTBN | LTBR | Standard | Cloth Lined | |||
LTBJ (Standard) LTBN (Backside Cloth Lined) LTBR (Both Sides Cloth Lined) | L | 050 | 74~1049 | 12.7 | 92 | - | ||||
075 | 19.1 | 138 | - | |||||||
100 | 25.4 | 184 | - | |||||||
150 | 38.1 | 276 | - | |||||||
H | 075 | 56~787 | 19.1 | 163 | - | |||||
100 | 25.4 | 216 | - | |||||||
150 | 38.1 | 324 | - | |||||||
200 | 50.8 | 432 | - | |||||||
S5M | 100 | 140~2000 | 10 | 60 | - | - | - | |||
150 | 15 | 90 | - | - | - | |||||
250 | 25 | 150 | - | - | - | |||||
S8M | 150 | 88~1250 | 15 | 117 | - | - | - | |||
250 | 25 | 196 | - | - | - | |||||
300 | 30 | 235 | - | - | - | |||||
400 | 40 | 313 | - | - | - | |||||
T5 | 100 | 140~2000 | 10 | 58 | - | |||||
150 | 15 | 87 | - | |||||||
200 | 20 | 116 | - | |||||||
250 | 25 | 145 | - | |||||||
T10 | 150 | 70~1000 | 15 | 180 | ||||||
200 | 20 | 240 | ||||||||
250 | 25 | 300 | ||||||||
300 | 30 | 360 | ||||||||
400 | 40 | 481 | ||||||||
500 | 50 | 601 | ||||||||
AT5 | 100 | 140~2000 | 10 | 74 | - | - | - | |||
150 | 15 | 110 | - | - | - | |||||
AT10 | 150 | 70~1000 | 15 | 234 | - | - | - | |||
200 | 20 | 312 | - | - | - | |||||
250 | 25 | 391 | - | - | - |