We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
JBHMG18-P[10-12.5/0.01]-L[10-35/0.1]
Description
Bushings for Locating Pins/Flanged
Stock availability:
On request
If you are inspecting MISUMI JBHMG18-P[10-12.5/0.01]-L[10-35/0.1], communicate with FAMAGA, the world's main producer of industrial equipment. Our company has advanced for more than ten years - these are cycles of experience, which are expressed in the quality of items and special attention to each orderer. We appreciate everyone, who worked with us - so, our regular consumers receive the most acceptable purchase conditions and discounts on the industrial equipment market. Now, there are more than 4 thousand such clients, and we constantly compose new agreements. More than 650 agreements are achieved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Venezuela, Belgium, Dominican Republic, Singapore, Slovenia, Mali, Lebanon, Papua New Guinea, Rwanda, Cameroon, Poland, Iceland, Turkmenistan, Honduras, El Salvador, Seychelles, Samoa, Bosnia and Herzegovina, Burkina Faso, South Korea, Sierra Leone, Russia, Jordan, Switzerland, Egypt, Mauritius, Cape Verde, Sweden, Luxembourg, Vietnam, Mauritania, Senegal, Morocco, Indonesia, Botswana, Costa Rica, United Arab Emirates, Cyprus, Kuwait, Malaysia, Georgia, Belarus. A advanced logistics link and a partnership network allow us to conduct our elements anywhere in the world immediately without undermining product quality.
A specific source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All items from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been provided, and this bulk is increasing every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more developed and technologically innovative industrial equipment so as stay in control.
To get some advice or make a request, call us by phone or write to the online chat on our site. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | ||
p6 | m6 | h6 | |||
EN 1.2510 Equiv. | - | 56~60HRC | JBHFPG | JBHFG | JBHG |
Electroless Nickel Plating | 56~60HRC | JBHFMPG | JBHFMG | JBHMG | |
EN 1.4125 Equiv. | - | 50~55HRC | JBHFCPG | JBHFCG | - |
Part Number | - | P | - | W | - | L |
JBAFG8 JBHG20 JBHFYG18 JBFR10 JBPE10 | - - - - - | P4.1 P13.0 P12.00 P6.0 P6.8 | - - | W4.5 W4.8 | - - - - - | L11 L20 L18.0 L10 L15 |
Part Number | P 0.01mm Increment | L 0.1mm Increment | Thickness (N) | R | H | T | Unit Price | |||
Type | D | JBHFPG JBHFG JBHG | JBHFMPG JBHFMG JBHMG | JBHFCPG JBHFCG | ||||||
(p6) JBHFPG JBHFMPG JBHFCPG (m6) JBHFG JBHFMG JBHFCG (h6) JBHG JBHMG | 8 | 4.00~4.50 | 8.0~10.0 | 1.75~2.50 | 1.0 | 12 | 3 | |||
10 | 4.00~6.50 | 8.0~15.0 | 1.75~3.00 | 14 | ||||||
12 | 6.00~8.50 | 2.0 | 16 | 4 | ||||||
15 | 8.00~10.50 | 10.0~35.0 | 2.25~3.50 | 19 | ||||||
18 | 10.00~12.50 | 2.75~4.00 | 22 | |||||||
20 | 12.00~13.50 | 3.25~4.00 | 26 | 5 | ||||||
22 | 12.00~13.50 | 4.25~5.00 | ||||||||
25 | 13.00~15.50 | 4.75~6.00 | 30 | |||||||
26 | 15.00~16.50 | 4.75~5.50 | ||||||||
30 | 16.00~20.50 | 12.0~50.0 | 4.75~7.00 | 3.0 | 35 | 6 | ||||
35 | 20.00~25.00 | 5.00~7.50 | 40 | |||||||
L+TPx3.0 |