We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are pursuing MISUMI PSFJ12-[15-1200/1], reach FAMAGA, the world's dominant provider of industrial equipment. Our company has progressed for more than ten years - these are ages of experience, which are symbolized in the quality of outcomes and personalseparate attention to each customer. We value everyone, who collaborated with us - so, our regular buyers accept the most flexible purchase conditions and discounts on the industrial equipment market. At present, there are more than 4000 such purchasers, and we constantly compose new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the earth Germany, United Kingdom, Guinea-Bissau, Singapore, Morocco, Guinea, El Salvador, Paraguay, Comoros, Ecuador, Angola, Malaysia, Belgium, Honduras, Seychelles, Qatar, Nicaragua, Rwanda, Ghana, Vietnam, The Bahamas, Haiti, Liberia, Croatia, Dominica, Suriname, Serbia, Costa Rica, Botswana, Zimbabwe, Albania, Brunei, Bosnia and Herzegovina, Jamaica, Burundi, Swaziland, Armenia, China, Mozambique, South Korea, Denmark. A well-developed logistics chains and a partnership network assist us to deliver our items anywhere in the planet with no delay without compromising product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are affirmed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been provided, and this number is rising every day. We are proud that clients choose FAMAGA again and again, and we strive to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To request or order, phone us or write to the online chat on our site. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Type | Material | Hardness | Surface Treatment | ||
D Tol. g6 | D Tol. h5 | D Tol. f8 | |||
SFJ | SFU | - | EN 1.3505 Equiv. | Effective Hardened Depth of Induction Hardening >>P.112 EN 1.3505 Equiv. 58HRC~ EN 1.4125 Equiv. 56HRC~ | - |
ZSFJ | - | - | |||
SSFJ | SSFU | - | EN 1.4125 Equiv. | ||
PSFJ | PSFU | - | EN 1.3505 Equiv. | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More | |
PSSFJ | PSSFU | - | EN 1.4125 Equiv. | ||
RSFJ | - | - | EN 1.3505 Equiv. | LTBC Plating | |
- | - | PSFG | EN 1.1191 Equiv. | - | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 10µ or More |
- | - | PSSFG | EN 1.4301 Equiv. |
Part Number | - | L |
SFJ20 | - | 75 |
Part Number | L specified in 1mm Increment | D Tol. | C | |||||
Type | D | g6 | h5 | f8 | ||||
(D Tolerance g6) SFJ SSFJ PSFJ PSSFJ | (D Tolerance h5) SFU SSFU PSFU PSSFU | (D Tolerance f8) PSFG PSSFG | 3 | 10~ 400 | -0.002 -0.008 | 0 -0.004 | - | 0.2 or Less |
4 | 10~ 400 | -0.004 -0.012 | 0 -0.005 | - | 0.2 or Less | |||
5 | 10~ 400 | -0.004 -0.012 | 0 -0.005 | - | 0.2 or Less | |||
6 | 15~ 800 | -0.004 -0.012 | 0 -0.005 | -0.010 -0.028 | 0.5 or Less | |||
8 | 15~ 1000 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 | 0.5 or Less | |||
10 | 15~ 1000 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 | 0.5 or Less | |||
12 | 15~ 1000 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 0.5 or Less | |||
13 | 15~ 1200 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 0.5 or Less | |||
15 | 15~ 1200 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 0.5 or Less | |||
16 | 30~ 1200 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 0.5 or Less | |||
18 | 30~ 1200 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 0.5 or Less | |||
20 | 30~ 1200 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1.0 or Less | |||
25 | 35~ 1200 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1.0 or Less | |||
30 | 35~ 1500 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1.0 or Less | |||
35 | 35~ 1500 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1.0 or Less | |||
40 | 50~ 1500 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1.0 or Less | |||
50 | 65~ 1500 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1.0 or Less |
Part Number | L specified in 1mm Increment | D Tol. g6 | C | |
Type | D | |||
(D Tolerance g6) LTBC Plating RSFJ | 3 | 20~400 | -0.002 -0.008 | 0.2 or Less |
4 | 20~400 | -0.004 -0.012 | 0.2 or Less | |
5 | 20~400 | -0.004 -0.012 | 0.2 or Less | |
6 | 20~500 | -0.004 -0.012 | 0.5 or Less | |
8 | 20~500 | -0.005 -0.014 | 0.5 or Less | |
10 | 20~500 | -0.005 -0.014 | 0.5 or Less | |
12 | 20~500 | -0.006 -0.017 | 0.5 or Less | |
13 | 25~500 | -0.006 -0.017 | 0.5 or Less | |
15 | 25~500 | -0.006 -0.017 | 0.5 or Less | |
16 | 30~500 | -0.006 -0.017 | 0.5 or Less | |
18 | 30~500 | -0.006 -0.017 | 0.5 or Less | |
20 | 30~500 | -0.007 -0.020 | 1.0 or Less | |
25 | 35~500 | -0.007 -0.020 | 1.0 or Less | |
30 | 35~500 | -0.007 -0.020 | 1.0 or Less |
Part Number | L Fixed | D Tol. g6 | C | |
Type | D | |||
ZSFJ | 10 | 100 | -0.005 -0.014 | 0.5 or Less |
12 | 100 | -0.006 -0.017 | 0.5 or Less | |
300 | 0.5 or Less | |||
20 | 200 | -0.007 -0.020 | 1.0 or Less | |
300 | 1.0 or Less |