We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking MISUMI PSFG15-[15-1200/1], reach FAMAGA, the world's principle retailer of streamlined equipment. Our company has worked for more than ten years - these are ages of experience, which are symbolized in the quality of outcomes and special attention to each consumer. We value everyone, who liased with us - so, our regular consumers get the most beneficial purchase conditions and discounts on the factory-made equipment market. At present, there are more than 4000 such clients, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the earth Germany, United Kingdom, Papua New Guinea, Mauritius, Liberia, Italy, Croatia, Senegal, Brunei, Cameroon, Malaysia, Switzerland, Malawi, Netherlands, Indonesia, Burma, Bolivia, The Gambia, Kazakhstan, Iran, Cape Verde, The Bahamas, Ecuador, Vietnam, Zimbabwe, Costa Rica, Botswana, Fiji, Mauritania, El Salvador, United States, Suriname, Georgia, Panama, North Korea, Dominica, Lithuania, Albania, Madagascar, Afghanistan, Macedonia. A well-elaborated logistics link and a partnership network assist us to send our items anywhere in the planet with no delay without discrediting product quality.
A specific source of repute for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All merchandises from FAMAGA are ensured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been provided, and this number is ascending every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To inquire or order, phone us or write to the online chat on our site. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Type | Material | Hardness | Surface Treatment | ||
D Tol. g6 | D Tol. h5 | D Tol. f8 | |||
SFJ | SFU | - | EN 1.3505 Equiv. | Effective Hardened Depth of Induction Hardening >>P.112 EN 1.3505 Equiv. 58HRC~ EN 1.4125 Equiv. 56HRC~ | - |
ZSFJ | - | - | |||
SSFJ | SSFU | - | EN 1.4125 Equiv. | ||
PSFJ | PSFU | - | EN 1.3505 Equiv. | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More | |
PSSFJ | PSSFU | - | EN 1.4125 Equiv. | ||
RSFJ | - | - | EN 1.3505 Equiv. | LTBC Plating | |
- | - | PSFG | EN 1.1191 Equiv. | - | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 10µ or More |
- | - | PSSFG | EN 1.4301 Equiv. |
Part Number | - | L |
SFJ20 | - | 75 |
Part Number | L specified in 1mm Increment | D Tol. | C | |||||
Type | D | g6 | h5 | f8 | ||||
(D Tolerance g6) SFJ SSFJ PSFJ PSSFJ | (D Tolerance h5) SFU SSFU PSFU PSSFU | (D Tolerance f8) PSFG PSSFG | 3 | 10~ 400 | -0.002 -0.008 | 0 -0.004 | - | 0.2 or Less |
4 | 10~ 400 | -0.004 -0.012 | 0 -0.005 | - | 0.2 or Less | |||
5 | 10~ 400 | -0.004 -0.012 | 0 -0.005 | - | 0.2 or Less | |||
6 | 15~ 800 | -0.004 -0.012 | 0 -0.005 | -0.010 -0.028 | 0.5 or Less | |||
8 | 15~ 1000 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 | 0.5 or Less | |||
10 | 15~ 1000 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 | 0.5 or Less | |||
12 | 15~ 1000 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 0.5 or Less | |||
13 | 15~ 1200 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 0.5 or Less | |||
15 | 15~ 1200 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 0.5 or Less | |||
16 | 30~ 1200 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 0.5 or Less | |||
18 | 30~ 1200 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 0.5 or Less | |||
20 | 30~ 1200 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1.0 or Less | |||
25 | 35~ 1200 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1.0 or Less | |||
30 | 35~ 1500 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1.0 or Less | |||
35 | 35~ 1500 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1.0 or Less | |||
40 | 50~ 1500 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1.0 or Less | |||
50 | 65~ 1500 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1.0 or Less |
Part Number | L specified in 1mm Increment | D Tol. g6 | C | |
Type | D | |||
(D Tolerance g6) LTBC Plating RSFJ | 3 | 20~400 | -0.002 -0.008 | 0.2 or Less |
4 | 20~400 | -0.004 -0.012 | 0.2 or Less | |
5 | 20~400 | -0.004 -0.012 | 0.2 or Less | |
6 | 20~500 | -0.004 -0.012 | 0.5 or Less | |
8 | 20~500 | -0.005 -0.014 | 0.5 or Less | |
10 | 20~500 | -0.005 -0.014 | 0.5 or Less | |
12 | 20~500 | -0.006 -0.017 | 0.5 or Less | |
13 | 25~500 | -0.006 -0.017 | 0.5 or Less | |
15 | 25~500 | -0.006 -0.017 | 0.5 or Less | |
16 | 30~500 | -0.006 -0.017 | 0.5 or Less | |
18 | 30~500 | -0.006 -0.017 | 0.5 or Less | |
20 | 30~500 | -0.007 -0.020 | 1.0 or Less | |
25 | 35~500 | -0.007 -0.020 | 1.0 or Less | |
30 | 35~500 | -0.007 -0.020 | 1.0 or Less |
Part Number | L Fixed | D Tol. g6 | C | |
Type | D | |||
ZSFJ | 10 | 100 | -0.005 -0.014 | 0.5 or Less |
12 | 100 | -0.006 -0.017 | 0.5 or Less | |
300 | 0.5 or Less | |||
20 | 200 | -0.007 -0.020 | 1.0 or Less | |
300 | 1.0 or Less |