We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPGDTVS10-P[4-8/0.01]-S[3-7/0.01]-F[0.3-3/0.1]-B[5-25/1]-V[3-7/0.1]-W[1-6.5/0.5]
Description
Slot Pins for Inspection Jigs/Stepped Diamond/Tapered/Configurable
Stock availability:
On request
If you are pursuing MISUMI KJPGDTVS10-P[4-8/0.01]-S[3-7/0.01]-F[0.3-3/0.1]-B[5-25/1]-V[3-7/0.1]-W[1-6.5/0.5], reach FAMAGA, the world's central vendor of streamlined equipment. Our company has lasted for more than ten years - these are years of experience, which are depicted in the quality of outcomes and private attention to each consumer. We praise everyone, who joined with us - therefore, our regular consumers pick up the most attractive purchase conditions and discounts on the industrial equipment market. Now, there are more than 4000 such clients, and we constantly form new agreements. More than 600 proceedings are resolved per day, because FAMAGA operates all over the earth Germany, United Kingdom, Morocco, Bangladesh, Madagascar, Gambia, Burkina Faso, Mozambique, Uganda, Zimbabwe, Laos, Samoa, Belgium, Cuba, Switzerland, Mongolia, Nicaragua, Georgia, Mexico, Ireland, Swaziland, United Arab Emirates, Niger, Japan, Croatia, Paraguay, Netherlands, Peru, Luxembourg, Brunei, Jordan, Burundi, Comoros, Kenya, Syria, Argentina, El Salvador, Chile, Tajikistan, Kiribati, Benin, United States, Cape Verde, East Timor, Djibouti, Serbia, Malaysia, Mauritania, South Korea, Ukraine. A well-developed logistics link and a partnership network help us to deliver our goods anywhere in the planet immediately without disreputing product quality.
A specific source of honor for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the direction of industrial equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been delivered, and this amount is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are eager to make more advanced and technologically advanced industrial equipment so as to stay on the top.
To get some advice or book, call us by phone or write to the online chat on our official website. You can also forward a list of the necessary equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material1 | Hardness | Round Tip | D-Shape Tip | ||
Type | Type | ||||
S 0 -0.02 | Sg6 | S 0 -0.02/F 0 -0.05 | Sg6/F 0 -0.03 | ||
EN 1.1191 Equiv. | - | KJPDTMV | KJPGDTMV | KJPDTV | KJPGDTV |
EN 1.1191 Equiv. | 45HRC~ | KJPDTMVH | KJPGDTMVH | KJPDTVH | KJPGDTVH |
EN 1.4301 Equiv. | - | KJPDTMVS | KJPGDTMVS | KJPDTVS | KJPGDTVS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPDTMVC | KJPGDTMVC | KJPDTVC | KJPGDTVC |
Part Number (TYPE, D) | - | P | - | S | - | F | - | B | - | V | - | W |
KJPDTMV16 | - | P10.20 | - | S6.80 | - | B20 | - | V8.0 | - | W6.0 |
S | g6 |
3.00 | -0.002 -0.008 |
3.01~ 6.00 | -0.004 -0.012 |
6.01~10.00 | -0.005 -0.014 |
10.01~18.00 | -0.006 -0.017 |
18.01~29.00 | -0.007 -0.020 |
Part Number | 0.01mm Increment | 0.1mm Increment | 1mm Increment | 0.1mm Increment | 0.5mm Increment | M | |||||
Round Tip | D-Shape Tip | D | P | S(P-1S) | F(FB | VP>V
VS+1 | W(V>W) | | |||
S0 -0.02 | Sg6 | S0 -0.02/F0 -0.05 | Sg6/F0 -0.03 | ||||||||
(EN 1.1191 Equiv.) KJPDTMV (EN 1.1191 Equiv. Hardened) KJPDTMVH (EN 1.4301 Equiv.) KJPDTMVS (EN 1.4125 Equiv.) KJPDTMVC | (EN 1.1191 Equiv.) KJPGDTMV (EN 1.1191 Equiv. Hardened) KJPGDTMVH (EN 1.4301 Equiv.) KJPGDTMVS (EN 1.4125 Equiv.) KJPGDTMVC | (EN 1.1191 Equiv.) KJPDTV (EN 1.1191 Equiv. Hardened) KJPDTVH (EN 1.4301 Equiv.) KJPDTVS (EN 1.4125 Equiv.) KJPDTVC | (EN 1.1191 Equiv.) KJPGDTV (EN 1.1191 Equiv. Hardened) KJPGDTVH (EN 1.4301 Equiv.) KJPGDTVS (EN 1.4125 Equiv.) KJPGDTVC | 8 | 4.00~6.00 | 3.00~4.00 | 0.3~2.0 | 5~15 | 4.0~5.0 | 1.0~4.5 | M4 |
10 | 4.00~8.00 | 3.00~6.00 | 0.3~3.0 | 5~25 For EN 1.4301 Equiv., BSx5 | 4.0~7.0 | 1.0~6.5 | M5 | ||||
12 | 4.00~10.00 | 3.00~8.00 | 0.3~4.0 | 4.0~9.0 | 1.0~8.5 | ||||||
16 | 8.00~14.00 | 4.00~12.00 | 0.5~6.0 | 4.0~13.0 | 1.0~12.5 | ||||||
20 | 10.00~18.00 | 5.00~16.00 | 1.0~8.0 | 6.0~17.0 | 1.0~16.5 | ||||||
25 | 15.00~23.00 | 8.00~21.00 | 2.0~10.0 | 9.0~22.0 | 1.0~21.5 | ||||||
10L | 10.00~16.00 | 5.00~14.00 | 1.0~7.0 | 6.0~15.0 | 1.0~14.5 | ||||||
12L | 12.00~20.00 | 6.00~18.00 | 2.0~9.0 | 7.0~19.0 | 1.0~18.5 | ||||||
16L | 16.00~25.00 | 8.00~23.00 | 2.0~11.0 | 9.0~24.0 | 1.0~23.5 | ||||||
20L | 20.00~30.00 | 10.00~28.00 | 2.0~14.0 | 11.0~29.0 | 1.0~28.5 |