We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPGDTVC8-P[4-6/0.01]-S[3-5/0.01]-F[0.3-2/0.1]-B[5-15/1]-V[3-5/0.1]-W[1-4.5/0.5]
Description
Slot Pins for Inspection Jigs/Stepped Diamond/Tapered/Configurable
Stock availability:
On request
If you are questing MISUMI KJPGDTVC8-P[4-6/0.01]-S[3-5/0.01]-F[0.3-2/0.1]-B[5-15/1]-V[3-5/0.1]-W[1-4.5/0.5], catch up with FAMAGA, the world's principle producer of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are described in the quality of products and personalseparate attention to each buyer. We praise everyone, who worked with us - thus, our regular customers bring in the most acceptable purchase forms and discounts on the machine made streamlined equipment market. At present, there are more than 3500 such consumers, and we constantly arrange new agreements. More than 750 affairs are settled per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Sudan, Tajikistan, Iran, Russia, Paraguay, Ghana, Zimbabwe, Myanmar, Benin, Brazil, Romania, Burma, Armenia, Botswana, Andorra, Senegal, Israel, Central African Republic, Kiribati, Poland, Azerbaijan, Tanzania, Brunei, Liechtenstein, Namibia, Greece, New Zealand, Malaysia, Croatia, Bulgaria, Estonia, Sierra Leone, Belarus, Malta, Seychelles, Jordan, Peru, Chile, Hungary, Zambia, Bosnia and Herzegovina, Mongolia, Mali, Norway, Czech Republic, Austria, Luxembourg. A well-shaped logistics bond and a partnership network assist us to ship our products anywhere in the earth with no delay without compromising product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We call into our team only experts, who already have experience in the sphere of factory-made equipment.
All goods from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been provided, and this quantity is amounting every day. We are proud that consumers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically innovative industrial equipment so as keep on top of it.
To consult or place an order, contact us or write a message to the online chat on our official website. You can also send a list of the needful equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material1 | Hardness | Round Tip | D-Shape Tip | ||
Type | Type | ||||
S 0 -0.02 | Sg6 | S 0 -0.02/F 0 -0.05 | Sg6/F 0 -0.03 | ||
EN 1.1191 Equiv. | - | KJPDTMV | KJPGDTMV | KJPDTV | KJPGDTV |
EN 1.1191 Equiv. | 45HRC~ | KJPDTMVH | KJPGDTMVH | KJPDTVH | KJPGDTVH |
EN 1.4301 Equiv. | - | KJPDTMVS | KJPGDTMVS | KJPDTVS | KJPGDTVS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPDTMVC | KJPGDTMVC | KJPDTVC | KJPGDTVC |
Part Number (TYPE, D) | - | P | - | S | - | F | - | B | - | V | - | W |
KJPDTMV16 | - | P10.20 | - | S6.80 | - | B20 | - | V8.0 | - | W6.0 |
S | g6 |
3.00 | -0.002 -0.008 |
3.01~ 6.00 | -0.004 -0.012 |
6.01~10.00 | -0.005 -0.014 |
10.01~18.00 | -0.006 -0.017 |
18.01~29.00 | -0.007 -0.020 |
Part Number | 0.01mm Increment | 0.1mm Increment | 1mm Increment | 0.1mm Increment | 0.5mm Increment | M | |||||
Round Tip | D-Shape Tip | D | P | S(P-1S) | F(FB | VP>V
VS+1 | W(V>W) | | |||
S0 -0.02 | Sg6 | S0 -0.02/F0 -0.05 | Sg6/F0 -0.03 | ||||||||
(EN 1.1191 Equiv.) KJPDTMV (EN 1.1191 Equiv. Hardened) KJPDTMVH (EN 1.4301 Equiv.) KJPDTMVS (EN 1.4125 Equiv.) KJPDTMVC | (EN 1.1191 Equiv.) KJPGDTMV (EN 1.1191 Equiv. Hardened) KJPGDTMVH (EN 1.4301 Equiv.) KJPGDTMVS (EN 1.4125 Equiv.) KJPGDTMVC | (EN 1.1191 Equiv.) KJPDTV (EN 1.1191 Equiv. Hardened) KJPDTVH (EN 1.4301 Equiv.) KJPDTVS (EN 1.4125 Equiv.) KJPDTVC | (EN 1.1191 Equiv.) KJPGDTV (EN 1.1191 Equiv. Hardened) KJPGDTVH (EN 1.4301 Equiv.) KJPGDTVS (EN 1.4125 Equiv.) KJPGDTVC | 8 | 4.00~6.00 | 3.00~4.00 | 0.3~2.0 | 5~15 | 4.0~5.0 | 1.0~4.5 | M4 |
10 | 4.00~8.00 | 3.00~6.00 | 0.3~3.0 | 5~25 For EN 1.4301 Equiv., BSx5 | 4.0~7.0 | 1.0~6.5 | M5 | ||||
12 | 4.00~10.00 | 3.00~8.00 | 0.3~4.0 | 4.0~9.0 | 1.0~8.5 | ||||||
16 | 8.00~14.00 | 4.00~12.00 | 0.5~6.0 | 4.0~13.0 | 1.0~12.5 | ||||||
20 | 10.00~18.00 | 5.00~16.00 | 1.0~8.0 | 6.0~17.0 | 1.0~16.5 | ||||||
25 | 15.00~23.00 | 8.00~21.00 | 2.0~10.0 | 9.0~22.0 | 1.0~21.5 | ||||||
10L | 10.00~16.00 | 5.00~14.00 | 1.0~7.0 | 6.0~15.0 | 1.0~14.5 | ||||||
12L | 12.00~20.00 | 6.00~18.00 | 2.0~9.0 | 7.0~19.0 | 1.0~18.5 | ||||||
16L | 16.00~25.00 | 8.00~23.00 | 2.0~11.0 | 9.0~24.0 | 1.0~23.5 | ||||||
20L | 20.00~30.00 | 10.00~28.00 | 2.0~14.0 | 11.0~29.0 | 1.0~28.5 |