We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPGDTMV20L-P[20-30/0.01]-S[10-29/0.01]-B[5-25/1]-V[10-29/0.1]-W[1-28.5/0.5]
Description
Slot Pins for Inspection Jigs/Stepped Diamond/Tapered/Configurable
Stock availability:
On request
If you are seeking MISUMI KJPGDTMV20L-P[20-30/0.01]-S[10-29/0.01]-B[5-25/1]-V[10-29/0.1]-W[1-28.5/0.5], reach FAMAGA, the world's top distributor of industrialized equipment. Our company has functioned for more than ten years - these are ages of experience, which are depicted in the quality of outcomes and particular attention to each purchaser. We appreciate everyone, who collaborated with us - so, our regular buyers receive the most attractive purchase conditions and discounts on the manufacturing equipment market. At this time, there are more than 4 thousand such buyers, and we constantly form new agreements. More than 600 contracts are concluded per day, because FAMAGA delivers all over the world Germany, United Kingdom, Gabon, Bhutan, Monaco, Papua New Guinea, Tajikistan, Italy, Thailand, Morocco, Denmark, Croatia, Seychelles, Turkey, United States, Singapore, East Timor, Nicaragua, Poland, Equatorial Guinea, Cape Verde, Egypt, Japan, China, Eritrea, Swaziland, Brunei, Namibia, Mali, South Sudan, Libya, Bolivia, Uganda, Pakistan, Iraq, Peru, Kazakhstan, Dominica, Syria, Madagascar, Nigeria, Afghanistan, Yemen, Mauritania, Haiti, The Gambia, Paraguay. A advanced logistics connection and a partnership network assist us to conduct our goods anywhere in the world with no delay without damaging product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All outcomes from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is ascending every day. We are happy that users choose FAMAGA again and again, and we are glad to make more exceptional and technologically innovative industrial equipment so as not to lower the bar.
To consult or order, phone us or write to the online chat on our official website. You can also forward a list of the required equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material1 | Hardness | Round Tip | D-Shape Tip | ||
Type | Type | ||||
S 0 -0.02 | Sg6 | S 0 -0.02/F 0 -0.05 | Sg6/F 0 -0.03 | ||
EN 1.1191 Equiv. | - | KJPDTMV | KJPGDTMV | KJPDTV | KJPGDTV |
EN 1.1191 Equiv. | 45HRC~ | KJPDTMVH | KJPGDTMVH | KJPDTVH | KJPGDTVH |
EN 1.4301 Equiv. | - | KJPDTMVS | KJPGDTMVS | KJPDTVS | KJPGDTVS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPDTMVC | KJPGDTMVC | KJPDTVC | KJPGDTVC |
Part Number (TYPE, D) | - | P | - | S | - | F | - | B | - | V | - | W |
KJPDTMV16 | - | P10.20 | - | S6.80 | - | B20 | - | V8.0 | - | W6.0 |
S | g6 |
3.00 | -0.002 -0.008 |
3.01~ 6.00 | -0.004 -0.012 |
6.01~10.00 | -0.005 -0.014 |
10.01~18.00 | -0.006 -0.017 |
18.01~29.00 | -0.007 -0.020 |
Part Number | 0.01mm Increment | 0.1mm Increment | 1mm Increment | 0.1mm Increment | 0.5mm Increment | M | |||||
Round Tip | D-Shape Tip | D | P | S(P-1S) | F(FB | VP>V
VS+1 | W(V>W) | | |||
S0 -0.02 | Sg6 | S0 -0.02/F0 -0.05 | Sg6/F0 -0.03 | ||||||||
(EN 1.1191 Equiv.) KJPDTMV (EN 1.1191 Equiv. Hardened) KJPDTMVH (EN 1.4301 Equiv.) KJPDTMVS (EN 1.4125 Equiv.) KJPDTMVC | (EN 1.1191 Equiv.) KJPGDTMV (EN 1.1191 Equiv. Hardened) KJPGDTMVH (EN 1.4301 Equiv.) KJPGDTMVS (EN 1.4125 Equiv.) KJPGDTMVC | (EN 1.1191 Equiv.) KJPDTV (EN 1.1191 Equiv. Hardened) KJPDTVH (EN 1.4301 Equiv.) KJPDTVS (EN 1.4125 Equiv.) KJPDTVC | (EN 1.1191 Equiv.) KJPGDTV (EN 1.1191 Equiv. Hardened) KJPGDTVH (EN 1.4301 Equiv.) KJPGDTVS (EN 1.4125 Equiv.) KJPGDTVC | 8 | 4.00~6.00 | 3.00~4.00 | 0.3~2.0 | 5~15 | 4.0~5.0 | 1.0~4.5 | M4 |
10 | 4.00~8.00 | 3.00~6.00 | 0.3~3.0 | 5~25 For EN 1.4301 Equiv., BSx5 | 4.0~7.0 | 1.0~6.5 | M5 | ||||
12 | 4.00~10.00 | 3.00~8.00 | 0.3~4.0 | 4.0~9.0 | 1.0~8.5 | ||||||
16 | 8.00~14.00 | 4.00~12.00 | 0.5~6.0 | 4.0~13.0 | 1.0~12.5 | ||||||
20 | 10.00~18.00 | 5.00~16.00 | 1.0~8.0 | 6.0~17.0 | 1.0~16.5 | ||||||
25 | 15.00~23.00 | 8.00~21.00 | 2.0~10.0 | 9.0~22.0 | 1.0~21.5 | ||||||
10L | 10.00~16.00 | 5.00~14.00 | 1.0~7.0 | 6.0~15.0 | 1.0~14.5 | ||||||
12L | 12.00~20.00 | 6.00~18.00 | 2.0~9.0 | 7.0~19.0 | 1.0~18.5 | ||||||
16L | 16.00~25.00 | 8.00~23.00 | 2.0~11.0 | 9.0~24.0 | 1.0~23.5 | ||||||
20L | 20.00~30.00 | 10.00~28.00 | 2.0~14.0 | 11.0~29.0 | 1.0~28.5 |