We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPDTV20-P[10-18/0.01]-S[6-17/0.01]-F[1-8/0.1]-B[5-25/1]-V[6-17/0.1]-W[1-16.5/0.5]
Description
Slot Pins for Inspection Jigs/Stepped Diamond/Tapered/Configurable
Stock availability:
On request
If you are looking for MISUMI KJPDTV20-P[10-18/0.01]-S[6-17/0.01]-F[1-8/0.1]-B[5-25/1]-V[6-17/0.1]-W[1-16.5/0.5], catch up with FAMAGA, the world's dominant retailer of mechanized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are described in the quality of products and special attention to each user. We appreciate everyone, who collaborated with us - hence, our regular clients get the most acceptable purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 4500 such clients, and we constantly arrange new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Bhutan, Georgia, Andorra, Azerbaijan, Eritrea, Gambia, France, Belgium, Samoa, Mongolia, Uganda, Palestine, Montenegro, Monaco, Tanzania, Uruguay, Liechtenstein, Chile, Turkey, Tonga, Jordan, Slovakia, Japan, Bosnia and Herzegovina, Belize, Latvia, Afghanistan, Kenya, Syria, Moldova, Tunisia, Austria, Denmark, Kyrgyzstan, Costa Rica, Malta, Malaysia, Iraq, Burkina Faso, Equatorial Guinea, Angola, Thailand, Bolivia, India, East Timor. A well-built logistics series and a partnership network cheer us to send our elements anywhere in the globe on-time without discrediting product quality.
A specific source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All products from FAMAGA are ensured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this bulk is growing every day. We are glad that buyers choose FAMAGA again and again, and we are eager to make more advanced and technologically advanced industrial equipment so as stay in control.
To request or make a request, get in touch with us or send a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material1 | Hardness | Round Tip | D-Shape Tip | ||
Type | Type | ||||
S 0 -0.02 | Sg6 | S 0 -0.02/F 0 -0.05 | Sg6/F 0 -0.03 | ||
EN 1.1191 Equiv. | - | KJPDTMV | KJPGDTMV | KJPDTV | KJPGDTV |
EN 1.1191 Equiv. | 45HRC~ | KJPDTMVH | KJPGDTMVH | KJPDTVH | KJPGDTVH |
EN 1.4301 Equiv. | - | KJPDTMVS | KJPGDTMVS | KJPDTVS | KJPGDTVS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPDTMVC | KJPGDTMVC | KJPDTVC | KJPGDTVC |
Part Number (TYPE, D) | - | P | - | S | - | F | - | B | - | V | - | W |
KJPDTMV16 | - | P10.20 | - | S6.80 | - | B20 | - | V8.0 | - | W6.0 |
S | g6 |
3.00 | -0.002 -0.008 |
3.01~ 6.00 | -0.004 -0.012 |
6.01~10.00 | -0.005 -0.014 |
10.01~18.00 | -0.006 -0.017 |
18.01~29.00 | -0.007 -0.020 |
Part Number | 0.01mm Increment | 0.1mm Increment | 1mm Increment | 0.1mm Increment | 0.5mm Increment | M | |||||
Round Tip | D-Shape Tip | D | P | S(P-1S) | F(FB | VP>V
VS+1 | W(V>W) | | |||
S0 -0.02 | Sg6 | S0 -0.02/F0 -0.05 | Sg6/F0 -0.03 | ||||||||
(EN 1.1191 Equiv.) KJPDTMV (EN 1.1191 Equiv. Hardened) KJPDTMVH (EN 1.4301 Equiv.) KJPDTMVS (EN 1.4125 Equiv.) KJPDTMVC | (EN 1.1191 Equiv.) KJPGDTMV (EN 1.1191 Equiv. Hardened) KJPGDTMVH (EN 1.4301 Equiv.) KJPGDTMVS (EN 1.4125 Equiv.) KJPGDTMVC | (EN 1.1191 Equiv.) KJPDTV (EN 1.1191 Equiv. Hardened) KJPDTVH (EN 1.4301 Equiv.) KJPDTVS (EN 1.4125 Equiv.) KJPDTVC | (EN 1.1191 Equiv.) KJPGDTV (EN 1.1191 Equiv. Hardened) KJPGDTVH (EN 1.4301 Equiv.) KJPGDTVS (EN 1.4125 Equiv.) KJPGDTVC | 8 | 4.00~6.00 | 3.00~4.00 | 0.3~2.0 | 5~15 | 4.0~5.0 | 1.0~4.5 | M4 |
10 | 4.00~8.00 | 3.00~6.00 | 0.3~3.0 | 5~25 For EN 1.4301 Equiv., BSx5 | 4.0~7.0 | 1.0~6.5 | M5 | ||||
12 | 4.00~10.00 | 3.00~8.00 | 0.3~4.0 | 4.0~9.0 | 1.0~8.5 | ||||||
16 | 8.00~14.00 | 4.00~12.00 | 0.5~6.0 | 4.0~13.0 | 1.0~12.5 | ||||||
20 | 10.00~18.00 | 5.00~16.00 | 1.0~8.0 | 6.0~17.0 | 1.0~16.5 | ||||||
25 | 15.00~23.00 | 8.00~21.00 | 2.0~10.0 | 9.0~22.0 | 1.0~21.5 | ||||||
10L | 10.00~16.00 | 5.00~14.00 | 1.0~7.0 | 6.0~15.0 | 1.0~14.5 | ||||||
12L | 12.00~20.00 | 6.00~18.00 | 2.0~9.0 | 7.0~19.0 | 1.0~18.5 | ||||||
16L | 16.00~25.00 | 8.00~23.00 | 2.0~11.0 | 9.0~24.0 | 1.0~23.5 | ||||||
20L | 20.00~30.00 | 10.00~28.00 | 2.0~14.0 | 11.0~29.0 | 1.0~28.5 |