We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPDTMVH25-P[15-23/0.01]-S[8-22/0.01]-B[5-25/1]-V[8-22/0.1]-W[1-21.5/0.5]
Description
Slot Pins for Inspection Jigs/Stepped Diamond/Tapered/Configurable
Stock availability:
On request
If you are looking for MISUMI KJPDTMVH25-P[15-23/0.01]-S[8-22/0.01]-B[5-25/1]-V[8-22/0.1]-W[1-21.5/0.5], communicate with FAMAGA, the world's central vendor of streamlined equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of items and special attention to each consumer. We esteem everyone, who cooperated with us - so, our regular clients pick up the most beneficial purchase terms and discounts on the manufacturing equipment market. At this moment, there are more than 4 thousand such clients, and we constantly arrange new agreements. More than 600 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Eswatini, Djibouti, Philippines, Azerbaijan, Singapore, Netherlands, Slovakia, United States, France, Eritrea, Suriname, Burundi, Estonia, Bhutan, Zimbabwe, Mexico, Syria, Togo, Gambia, Cyprus, Comoros, Belize, South Sudan, Malaysia, Australia, Iran, Serbia, Guyana, Poland, United Arab Emirates, Kuwait, China, Indonesia, Angola, Switzerland, Ukraine, Kazakhstan, Georgia, Andorra, East Timor, Mongolia, Samoa, Jamaica. A well-built logistics bond and a partnership network allow us to dispatch our elements anywhere in the world as soon as possible without discrediting product quality.
A specific source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All merchandises from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is growing every day. We are happy that buyers choose FAMAGA again and again, and we are eager to make more exceptional and technologically innovative industrial equipment so as not to lower the bar.
To request or order, phone us or send a message to the online chat on our official website. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material1 | Hardness | Round Tip | D-Shape Tip | ||
Type | Type | ||||
S 0 -0.02 | Sg6 | S 0 -0.02/F 0 -0.05 | Sg6/F 0 -0.03 | ||
EN 1.1191 Equiv. | - | KJPDTMV | KJPGDTMV | KJPDTV | KJPGDTV |
EN 1.1191 Equiv. | 45HRC~ | KJPDTMVH | KJPGDTMVH | KJPDTVH | KJPGDTVH |
EN 1.4301 Equiv. | - | KJPDTMVS | KJPGDTMVS | KJPDTVS | KJPGDTVS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPDTMVC | KJPGDTMVC | KJPDTVC | KJPGDTVC |
Part Number (TYPE, D) | - | P | - | S | - | F | - | B | - | V | - | W |
KJPDTMV16 | - | P10.20 | - | S6.80 | - | B20 | - | V8.0 | - | W6.0 |
S | g6 |
3.00 | -0.002 -0.008 |
3.01~ 6.00 | -0.004 -0.012 |
6.01~10.00 | -0.005 -0.014 |
10.01~18.00 | -0.006 -0.017 |
18.01~29.00 | -0.007 -0.020 |
Part Number | 0.01mm Increment | 0.1mm Increment | 1mm Increment | 0.1mm Increment | 0.5mm Increment | M | |||||
Round Tip | D-Shape Tip | D | P | S(P-1S) | F(FB | VP>V
VS+1 | W(V>W) | | |||
S0 -0.02 | Sg6 | S0 -0.02/F0 -0.05 | Sg6/F0 -0.03 | ||||||||
(EN 1.1191 Equiv.) KJPDTMV (EN 1.1191 Equiv. Hardened) KJPDTMVH (EN 1.4301 Equiv.) KJPDTMVS (EN 1.4125 Equiv.) KJPDTMVC | (EN 1.1191 Equiv.) KJPGDTMV (EN 1.1191 Equiv. Hardened) KJPGDTMVH (EN 1.4301 Equiv.) KJPGDTMVS (EN 1.4125 Equiv.) KJPGDTMVC | (EN 1.1191 Equiv.) KJPDTV (EN 1.1191 Equiv. Hardened) KJPDTVH (EN 1.4301 Equiv.) KJPDTVS (EN 1.4125 Equiv.) KJPDTVC | (EN 1.1191 Equiv.) KJPGDTV (EN 1.1191 Equiv. Hardened) KJPGDTVH (EN 1.4301 Equiv.) KJPGDTVS (EN 1.4125 Equiv.) KJPGDTVC | 8 | 4.00~6.00 | 3.00~4.00 | 0.3~2.0 | 5~15 | 4.0~5.0 | 1.0~4.5 | M4 |
10 | 4.00~8.00 | 3.00~6.00 | 0.3~3.0 | 5~25 For EN 1.4301 Equiv., BSx5 | 4.0~7.0 | 1.0~6.5 | M5 | ||||
12 | 4.00~10.00 | 3.00~8.00 | 0.3~4.0 | 4.0~9.0 | 1.0~8.5 | ||||||
16 | 8.00~14.00 | 4.00~12.00 | 0.5~6.0 | 4.0~13.0 | 1.0~12.5 | ||||||
20 | 10.00~18.00 | 5.00~16.00 | 1.0~8.0 | 6.0~17.0 | 1.0~16.5 | ||||||
25 | 15.00~23.00 | 8.00~21.00 | 2.0~10.0 | 9.0~22.0 | 1.0~21.5 | ||||||
10L | 10.00~16.00 | 5.00~14.00 | 1.0~7.0 | 6.0~15.0 | 1.0~14.5 | ||||||
12L | 12.00~20.00 | 6.00~18.00 | 2.0~9.0 | 7.0~19.0 | 1.0~18.5 | ||||||
16L | 16.00~25.00 | 8.00~23.00 | 2.0~11.0 | 9.0~24.0 | 1.0~23.5 | ||||||
20L | 20.00~30.00 | 10.00~28.00 | 2.0~14.0 | 11.0~29.0 | 1.0~28.5 |