We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
NCLSS8-15-[10-100/0.1]
Description
Collars/Length +-0.01mm
Stock availability:
On request
If you are looking for MISUMI NCLSS8-15-[10-100/0.1], communicate with FAMAGA, the world's central company of streamlined equipment. Our company has lasted for more than ten years - these are ages of experience, which are expressed in the quality of outcomes and personalseparate attention to each consumer. We esteem everyone, who engaged with us - so, our regular customers obtain the most attractive purchase terms and discounts on the factory-made equipment market. Today, there are more than 4000 such purchasers, and we constantly arrange new agreements. More than 750 proceedings are resolved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, San Marino, Cambodia, Bulgaria, Mozambique, Slovenia, Lithuania, Samoa, Lebanon, Guatemala, Egypt, Oman, Mongolia, United Arab Emirates, South Korea, Namibia, Monaco, Eritrea, China, Guyana, Chile, Serbia, Angola, Uruguay, Yemen, East Timor, Malaysia, Mexico, Ecuador, Sudan, Azerbaijan, Croatia, Argentina, Ireland, Pakistan, Togo, Haiti, United States, Nepal, Mauritius, Thailand, Albania, Libya, Burkina Faso, Qatar. A well-built logistics series and a partnership network let us to dispatch our elements anywhere in the planet with no delay without discrediting product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All products from FAMAGA are guaranteed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been delivered, and this amount is increasing every day. We are proud that users choose FAMAGA again and again, and we are glad to make more progressive and technologically developed industrial equipment so as stay in control.
To get some advice or make a request, contact us or write a message to the online chat on our site. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Type | Material | Surface Treatment | |
L Dimension Configurable | |||
Standard Grade | Precision Grade | ||
NCLC | ACSC | EN 1.1191 Equiv. | - |
NCLB | ABSC | Black Oxide | |
NCLM | AMSC | Electroless Nickel Plating | |
NCLA | AASC | Aluminum Alloy 2000 series | Clear Anodize |
NCLSS | SASC | EN 1.4301 Equiv. | - |
Part Number | - | D | - | L |
NCLB3 | - | 5 | - | 10.5 |
Part Number | D Selection | L 0.1mm Increment | Unit Price | ||||||||||||||||||||||||||||
Standard Grade | Precision Grade | ||||||||||||||||||||||||||||||
Type | V | NCLC | NCLB | NCLM | NCLA | NCLSS | ACSC | ABSC | AMSC | AASC | SASC | ||||||||||||||||||||
Standard Grade NCLC NCLB NCLM NCLA NCLSS Precision Grade ACSC ABSC AMSC AASC SASC | 2 | 4 | 5 | 6 | 8 | 10 | 10.0~ 16.0 | ||||||||||||||||||||||||
3 | 5 | 6 | 8 | 10 | 12 | 10.0~ 25.0 | |||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||
4 | 5 | 6 | (6) | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 10.0~ 25.0 | ||||||||||||||||||||
(6)Applicable to V4. | 25.1~ 50.0 | ||||||||||||||||||||||||||||||
20 | 25 | 10.0~ 25.0 | |||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||
8 | 10 | 12 | (10) | (12) | (13) | (14) | 15 | 16 | 10.0~ 25.0 | ||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||
(10)Applicable to V8. (12 13 14)Applicable to V8, 10. | 75.1~ 100.0 | ||||||||||||||||||||||||||||||
20 | 25 | 10.0~ 25.0 | |||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||
75.1~ 100.0 | |||||||||||||||||||||||||||||||
30 | 35 | 10.0~ 25.0 | |||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||
75.1~ 100.0 | |||||||||||||||||||||||||||||||
1012 | 40 | 50 | 60 | 10.0~ 25.0 | |||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||
75.1~ 100.0 | |||||||||||||||||||||||||||||||
15 | 16 | 20 | 10.0~ 25.0 | ||||||||||||||||||||||||||||
(20) | 25 | 25.1~ 50.0 | |||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||
(20)Applicable to V15, 16. | 75.1~ 100.0 | ||||||||||||||||||||||||||||||
30 | 35 | 10.0~ 25.0 | |||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||
75.1~ 100.0 | |||||||||||||||||||||||||||||||
40 | 50 | 60 | 10.0~ 25.0 | ||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||
75.1~ 100.0 | |||||||||||||||||||||||||||||||
25 | 30 | 35 | 10.0~ 25.0 | ||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||
75.1~ 100.0 | |||||||||||||||||||||||||||||||
2530 | 40 | 50 | 60 | 10.0~ 25.0 | |||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||
75.1~ 100.0 |