We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
NCLMH12-25-[5-6/0.1]
Description
Hardened Collars/Length +-0.10 & +-0.01 mm/Length Configurable
Stock availability:
On request
If you are inspecting MISUMI NCLMH12-25-[5-6/0.1], communicate with FAMAGA, the world's primary vendor of manufacturing equipment. Our company has operated for more than ten years - these are ages of experience, which are expressed in the quality of spare parts and particular attention to each orderer. We value everyone, who joined with us - so, our regular purchasers pick up the most attractive purchase forms and discounts on the factory-made equipment market. Today, there are more than 3500 such clients, and we constantly form new agreements. More than 750 contracts are concluded per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Venezuela, San Marino, United States, Australia, Grenada, Honduras, Israel, Monaco, Benin, Ghana, Albania, South Korea, The Gambia, Belize, Malta, Vietnam, Chile, Singapore, Libya, Poland, Djibouti, Turkmenistan, Netherlands, Angola, Finland, Algeria, Mauritania, China, Cyprus, Tonga, United Arab Emirates, Cape Verde, Botswana, Indonesia, Morocco, Sweden, Iran, Seychelles, Luxembourg, Dominica, Switzerland, Serbia, Kenya, Nepal, North Korea, Georgia, Rwanda. A well-developed logistics bond and a partnership network allow us to send our products anywhere in the earth quickly without undermining product quality.
A special source of dignity for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only experts, who already have experience in the field of manufacturing equipment.
All spare parts from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been delivered, and this bulk is amounting every day. We are proud that purchasers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically advanced industrial equipment so as keep on top of it.
To consult or book, get in touch with us or send a message to the online chat on our official website. You can also send a list of the needful equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | Material | Surface Treatment | Hardness | |||
L Dimension Configurable | Dimension Configurable | |||||
Standard Grade | Precision Grade | Standard Grade | Precision Grade | |||
NCLCH | ASH | FNCLCH | FAS | EN 1.1191 Equiv. | - | 45~50HRC |
NCLBH | ASC | FNCLBH | FASC | Black Oxide | ||
NCLMH | PASC | FNCLMH | FPASC | Electroless Nickel Plating | ||
- | - | FNCSK | FASK | EN 1.2510 Equiv. | - | 55HRC~ |
FNCSKB | FASKB | Black Oxide | ||||
FNCSKM | FASKM | Electroless Nickel Plating | ||||
NCLSSH | SASCH | FNCLSH | FSASCH | EN 1.4031 Equiv. | - | 45~50HRC |
Part Number | - | D | - | L |
NCLCH10 | - | 20 | - | 50.5 |
Part Number | - | V | - | D | - | L |
FNCLCH | - | V10.5 | - | D19.5 | - | L50.5 |
Part Number | D Selection | L 0.1mm Increment | Unit Price | ||||||||||||||||||||||||||||||||||||
Standard Grade | Precision Grade | ||||||||||||||||||||||||||||||||||||||
Type | V | NCLCH | NCLBH | NCLMH | NCLSSH | ASH | ASC | PASC | SASCH | ||||||||||||||||||||||||||||||
Standard Grade NCLCH NCLBH NCLMH NCLSSH Precision Grade ASH ASC PASC SASCH | 2 | 4 | 5 | 6 | 8 | 10 | 10.0~ 16.0 | ||||||||||||||||||||||||||||||||
3 | 5 | 6 | 8 | 10 | 12 | 10.0~ 25.0 | |||||||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
4 | 5 | 6 | (6) | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 10.0~ 25.0 | ||||||||||||||||||||||||||||
(6)Applicable to V4. | 25.1~ 50.0 | ||||||||||||||||||||||||||||||||||||||
20 | 25 | 10.0~ 25.0 | |||||||||||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
8 | 10 | 12 | (10) | (12) | (13) | (14) | 15 | 16 | 10.0~ 25.0 | ||||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||||||||||
(10)Applicable to V8. (12 13 14)Applicable to V8, 10. | 75.1~ 100.0 | ||||||||||||||||||||||||||||||||||||||
8 | 10 | 12 | 15 | 16 | 20 | 10.0~ 25.0 | |||||||||||||||||||||||||||||||||
(20) | 25 | 25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||||||||||
(20)Not applicable to V20. | 75.1~ 100.0 | ||||||||||||||||||||||||||||||||||||||
8 | 10 | 12 | 15 | 16 | 20 | 25 | 30 | 35 | 10.0~ 25.0 | ||||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||||||||||
75.1~ 100.0 | |||||||||||||||||||||||||||||||||||||||
10 | 12 | 15 | 16 | 20 | 25 | 30 | 40 | 50 | 60 | 10.0~ 25.0 | |||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||||||||||
75.1~ 100.0 |
Part Number | V 0.5mm Increment (V3 or More) | D | L 0.1mm Increment | Unit Price | |||||||||||||
Standard Grade | Precision Grade | ||||||||||||||||
FNCLCH | FNCLBH | FNCLMH | FNCSK | FNCSKB | FNCSKM | FNCLSH | FAS | FASC | FPASC | FASK | FASKB | FASKM | FSASCH | ||||
Standard Grade FNCLCH FNCLBH FNCLMH FNCSK FNCSKB FNCSKM FNCLSH Precision Grade FAS FASC FPASC FASK FASKB FASKM FSASCH | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~90.0 | 4.0~10.0 (0.5mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | - | - | - | - | - | - | - | ||||||||||
75.1~ 100.0 | - | - | - | - | - | - | - | - | - | - | |||||||
10.5~20.0 (0.5mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
21~30 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
31~40 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
41~50 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
51~60 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
61~80 (1mm Increment) | 10.0~ 25.0 | - | |||||||||||||||
25.1~ 50.0 | - | ||||||||||||||||
50.1~ 75.0 | - | ||||||||||||||||
75.1~ 100.0 | - | ||||||||||||||||
81~100 (1mm Increment) | 10.0~ 25.0 | - | |||||||||||||||
25.1~ 50.0 | - | ||||||||||||||||
50.1~ 75.0 | - | ||||||||||||||||
75.1~ 100.0 | - | ||||||||||||||||
Machining Limits of Collar Thickness and Overall Length 10.0L50.0 (D-V)/21 50.1L100.0 (D-V)/23 | Machining Limits of Collar Thickness and Overall Length (Material: EN 1.2510 Equiv.) 4D10 VD-2 61D80 VD-8 10.5D30 VD-4 81D100 VD-10 31D60 VD-6 | Machining Limits of V and Overall Length LVx8 |