We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing MISUMI MSTM12-80, connect FAMAGA, the world's chief distributor of factory-made equipment. Our company has worked for more than ten years - these are cycles of experience, which are portrayed in the quality of products and private attention to each purchaser. We understand everyone, who cooperated with us - hence, our regular consumers bring in the most favorable purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such purchasers, and we constantly make new agreements. More than 750 transactions are made per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Slovenia, Seychelles, Dominican Republic, Mauritius, Andorra, Morocco, Djibouti, Colombia, Singapore, Niger, Guinea, Zimbabwe, Malaysia, Romania, Cameroon, Suriname, New Zealand, Georgia, Bosnia and Herzegovina, Monaco, Switzerland, Peru, Dominica, Mauritania, Uruguay, China, Russia, Fiji, Burkina Faso, Jordan, Kuwait, Israel, Ireland, Guatemala, Poland, Senegal, Costa Rica, Tunisia, Finland, United States, Argentina, Serbia, Philippines, Afghanistan, Jamaica, Togo, Eswatini, Nepal, Denmark, Cyprus, Bulgaria. A well-built logistics link and a partnership network let us to send our goods anywhere in the earth immediately without damaging product quality.
A special source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the sphere of industrial equipment.
All goods from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically innovative industrial equipment so as not to lower the bar.
To ask a question or order, get in touch with us or write a message to the online chat on our official website. You can also send a list of the needful equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Type | D Tolerance | Material | Hardness |
MST | p6 | EN 1.3505 Equiv. | 45~50HRC |
MSTM | m6 | ||
MSTMS | EN 1.4125 Equiv. |
Part Number | - | L |
MSTP5 MSTMS6 | - - | 10 20 |
1 | 2 | M x P | Dp6 | Part Number | L | Unit Price | Volume Discount Rate | |||||||||||||
Type | D | 1~299 | 300~500 | |||||||||||||||||
1.5 | 0.5 | 3 x 0.5 | 6 | +0.020 +0.012 | MST (p6 Type) | 5 | 10 | 15 | 20 | 25 | 30 | |||||||||
2.0 | 4 x 0.7 | *8 | 6 | 20 | 30 | |||||||||||||||
10 | 15 | 25 | 35 | 40 | 50 | |||||||||||||||
5 x 0.8 | +0.024 +0.015 | 8 | 30 | |||||||||||||||||
15 | 20 | 25 | 35 | 40 | 45 | 50 | 60 | |||||||||||||
70 | 80 | |||||||||||||||||||
2.5 | 6 x 1.0 | 10 | 10 | 40 | ||||||||||||||||
15 | 20 | 25 | 30 | 35 | 45 | 50 | 60 | 70 | ||||||||||||
80 | ||||||||||||||||||||
1.0 | +0.029 +0.018 | 12 | 20 | 30 | 40 | 50 | 60 | 70 | ||||||||||||
80 | ||||||||||||||||||||
8 x 1.25 | 15 | 13 | 50 | |||||||||||||||||
40 | 60 | 70 | ||||||||||||||||||
80 | ||||||||||||||||||||
3.0 | 16 | 60 | ||||||||||||||||||
40 | 50 | 70 | 80 | |||||||||||||||||
10 x 1.5 | 18 | +0.035 +0.022 | 20 | 50 | 60 | 70 | 80 |
1 | 2 | M x P | Dm6 | Part Number | L | Unit Price | Volume Discount Rate | |||||||||||||
Type | D | 1~299 | 300~500 | |||||||||||||||||
1.5 | 0.3 | 3 x 0.5 | 6 | +0.012 +0.004 | MSTM (m6 Type) | 5 | 10 | 15 | 20 | 25 | 30 | |||||||||
2.0 | 4 x 0.7 | *8 | 6 | 20 | 30 | |||||||||||||||
10 | 15 | 25 | 35 | 40 | 50 | |||||||||||||||
0.5 | 5 x 0.8 | +0.015 +0.006 | 8 | 30 | ||||||||||||||||
15 | 20 | 25 | 35 | 40 | 45 | 50 | 60 | |||||||||||||
70 | 80 | |||||||||||||||||||
2.5 | 6 x 1.0 | 10 | 10 | 40 | ||||||||||||||||
15 | 20 | 25 | 30 | 35 | 45 | 50 | 60 | 70 | ||||||||||||
80 | ||||||||||||||||||||
1.0 | +0.018 +0.007 | 12 | 20 | 30 | 40 | 50 | 60 | 70 | ||||||||||||
80 | ||||||||||||||||||||
8 x 1.25 | 15 | 13 | 50 | |||||||||||||||||
40 | 60 | 70 | ||||||||||||||||||
80 | ||||||||||||||||||||
3.0 | 1.5 | 16 | 60 | |||||||||||||||||
40 | 50 | 70 | 80 | |||||||||||||||||
10 x 1.5 | 18 | +0.021 +0.008 | 20 | 50 | 60 | 70 | 80 |
1 | 2 | MxP | Dm6 | Part Number | L | Unit Price | Volume Discount Rate | |||||||||||||||
Type | D | 1 ~ 19 pc(s). | 20~29 | 30~49 | 50~100 | |||||||||||||||||
1.5 | 0.3 | 3 x 0.5 | 6 | +0.012 +0.004 | MSTMS (m6 Type) | 5 | 10 | 15 | 20 | |||||||||||||
2.0 | 4 x 0.7 | *8 | 6 | 20 | 30 | |||||||||||||||||
10 | 15 | 25 | ||||||||||||||||||||
0.5 | 5x0.8 | +0.015 +0.006 | 8 | 30 | ||||||||||||||||||
15 | 20 | 25 | 35 | 40 | ||||||||||||||||||
6x1.0 | 10 | 20 | 25 | 30 | 35 |