We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
ASH8-13-[5-6/0.1]
Description
Hardened Collars/Length +-0.10 & +-0.01 mm/Length Configurable
Stock availability:
On request
If you are pursuing MISUMI ASH8-13-[5-6/0.1], call FAMAGA, the world's chief distributor of factory-made equipment. Our company has existed for more than ten years - these are cycles of experience, which are illustrated in the quality of merchandises and special attention to each client. We admire everyone, who conspired with us - hence, our regular buyers receive the most attractive purchase forms and discounts on the manufacturing equipment market. At this time, there are more than 3500 such purchasers, and we constantly arrange new agreements. More than 600 transactions are made per day, because FAMAGA supplies all over the world Germany, United Kingdom, Lithuania, Gambia, Bolivia, Liechtenstein, Mongolia, South Africa, Cambodia, Albania, Monaco, Iran, Iceland, Uganda, North Korea, Sudan, Algeria, Norway, Nicaragua, Tonga, Bulgaria, Slovakia, Madagascar, Tunisia, Zimbabwe, Grenada, United Arab Emirates, South Korea, New Zealand, Andorra, Cape Verde, Macedonia, Nigeria, Bangladesh, Jamaica, Armenia, Brazil, Czech Republic, Rwanda, Zambia, Burundi, Kazakhstan, Mexico, Laos, Brunei, Thailand, Argentina. A advanced logistics link and a partnership network cheer us to dispatch our units anywhere in the planet promptly without disreputing product quality.
A special source of pride for FAMAGA is its staff members, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are assured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is increasing every day. We are pleased that users choose FAMAGA again and again, and we are happy to make more developed and technologically advanced industrial equipment so as keep on top of it.
To get some advice or book, phone us or write a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Part Number | Material | Surface Treatment | Hardness | |||
L Dimension Configurable | Dimension Configurable | |||||
Standard Grade | Precision Grade | Standard Grade | Precision Grade | |||
NCLCH | ASH | FNCLCH | FAS | EN 1.1191 Equiv. | - | 45~50HRC |
NCLBH | ASC | FNCLBH | FASC | Black Oxide | ||
NCLMH | PASC | FNCLMH | FPASC | Electroless Nickel Plating | ||
- | - | FNCSK | FASK | EN 1.2510 Equiv. | - | 55HRC~ |
FNCSKB | FASKB | Black Oxide | ||||
FNCSKM | FASKM | Electroless Nickel Plating | ||||
NCLSSH | SASCH | FNCLSH | FSASCH | EN 1.4031 Equiv. | - | 45~50HRC |
Part Number | - | D | - | L |
NCLCH10 | - | 20 | - | 50.5 |
Part Number | - | V | - | D | - | L |
FNCLCH | - | V10.5 | - | D19.5 | - | L50.5 |
Part Number | D Selection | L 0.1mm Increment | Unit Price | ||||||||||||||||||||||||||||||||||||
Standard Grade | Precision Grade | ||||||||||||||||||||||||||||||||||||||
Type | V | NCLCH | NCLBH | NCLMH | NCLSSH | ASH | ASC | PASC | SASCH | ||||||||||||||||||||||||||||||
Standard Grade NCLCH NCLBH NCLMH NCLSSH Precision Grade ASH ASC PASC SASCH | 2 | 4 | 5 | 6 | 8 | 10 | 10.0~ 16.0 | ||||||||||||||||||||||||||||||||
3 | 5 | 6 | 8 | 10 | 12 | 10.0~ 25.0 | |||||||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
4 | 5 | 6 | (6) | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 10.0~ 25.0 | ||||||||||||||||||||||||||||
(6)Applicable to V4. | 25.1~ 50.0 | ||||||||||||||||||||||||||||||||||||||
20 | 25 | 10.0~ 25.0 | |||||||||||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
8 | 10 | 12 | (10) | (12) | (13) | (14) | 15 | 16 | 10.0~ 25.0 | ||||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||||||||||
(10)Applicable to V8. (12 13 14)Applicable to V8, 10. | 75.1~ 100.0 | ||||||||||||||||||||||||||||||||||||||
8 | 10 | 12 | 15 | 16 | 20 | 10.0~ 25.0 | |||||||||||||||||||||||||||||||||
(20) | 25 | 25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||||||||||
(20)Not applicable to V20. | 75.1~ 100.0 | ||||||||||||||||||||||||||||||||||||||
8 | 10 | 12 | 15 | 16 | 20 | 25 | 30 | 35 | 10.0~ 25.0 | ||||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||||||||||
75.1~ 100.0 | |||||||||||||||||||||||||||||||||||||||
10 | 12 | 15 | 16 | 20 | 25 | 30 | 40 | 50 | 60 | 10.0~ 25.0 | |||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||||||||||
75.1~ 100.0 |
Part Number | V 0.5mm Increment (V3 or More) | D | L 0.1mm Increment | Unit Price | |||||||||||||
Standard Grade | Precision Grade | ||||||||||||||||
FNCLCH | FNCLBH | FNCLMH | FNCSK | FNCSKB | FNCSKM | FNCLSH | FAS | FASC | FPASC | FASK | FASKB | FASKM | FSASCH | ||||
Standard Grade FNCLCH FNCLBH FNCLMH FNCSK FNCSKB FNCSKM FNCLSH Precision Grade FAS FASC FPASC FASK FASKB FASKM FSASCH | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~90.0 | 4.0~10.0 (0.5mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | - | - | - | - | - | - | - | ||||||||||
75.1~ 100.0 | - | - | - | - | - | - | - | - | - | - | |||||||
10.5~20.0 (0.5mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
21~30 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
31~40 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
41~50 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
51~60 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
61~80 (1mm Increment) | 10.0~ 25.0 | - | |||||||||||||||
25.1~ 50.0 | - | ||||||||||||||||
50.1~ 75.0 | - | ||||||||||||||||
75.1~ 100.0 | - | ||||||||||||||||
81~100 (1mm Increment) | 10.0~ 25.0 | - | |||||||||||||||
25.1~ 50.0 | - | ||||||||||||||||
50.1~ 75.0 | - | ||||||||||||||||
75.1~ 100.0 | - | ||||||||||||||||
Machining Limits of Collar Thickness and Overall Length 10.0L50.0 (D-V)/21 50.1L100.0 (D-V)/23 | Machining Limits of Collar Thickness and Overall Length (Material: EN 1.2510 Equiv.) 4D10 VD-2 61D80 VD-8 10.5D30 VD-4 81D100 VD-10 31D60 VD-6 | Machining Limits of V and Overall Length LVx8 |