We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
ASC6-10-[5-6/0.1]
Description
Hardened Collars/Length +-0.10 & +-0.01 mm/Length Configurable
Stock availability:
On request
If you are looking for MISUMI ASC6-10-[5-6/0.1], communicate with FAMAGA, the world's main producer of industrial equipment. Our company has advanced for more than ten years - these are ages of experience, which are expressed in the quality of spare parts and personalseparate attention to each customer. We value everyone, who worked with us - so, our regular customers bring in the most beneficial purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4500 such buyers, and we constantly arrange new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Honduras, Chad, Nepal, Papua New Guinea, Sweden, Azerbaijan, Egypt, El Salvador, Iran, Liberia, Guyana, Belgium, Belarus, Netherlands, Uruguay, Oman, Switzerland, Samoa, Zimbabwe, Burkina Faso, Luxembourg, Serbia, Rwanda, The Bahamas, Hungary, Togo, Philippines, Georgia, Tonga, China, Sierra Leone, Cyprus, Mongolia, Ireland, Mauritania, United States, Kiribati, Mauritius, Laos, Poland, South Korea, Cape Verde, Afghanistan, Indonesia, Greece. A advanced logistics bond and a partnership network allow us to conduct our products anywhere in the world as soon as possible without compromising product quality.
A specific source of pride for FAMAGA is its staff members, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All merchandises from FAMAGA are assured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been provided, and this number is growing every day. We are pleased that users choose FAMAGA again and again, and we are pleased to make more developed and technologically modern industrial equipment so as not to lower the bar.
To get some advice or place an order, contact us or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | Material | Surface Treatment | Hardness | |||
L Dimension Configurable | Dimension Configurable | |||||
Standard Grade | Precision Grade | Standard Grade | Precision Grade | |||
NCLCH | ASH | FNCLCH | FAS | EN 1.1191 Equiv. | - | 45~50HRC |
NCLBH | ASC | FNCLBH | FASC | Black Oxide | ||
NCLMH | PASC | FNCLMH | FPASC | Electroless Nickel Plating | ||
- | - | FNCSK | FASK | EN 1.2510 Equiv. | - | 55HRC~ |
FNCSKB | FASKB | Black Oxide | ||||
FNCSKM | FASKM | Electroless Nickel Plating | ||||
NCLSSH | SASCH | FNCLSH | FSASCH | EN 1.4031 Equiv. | - | 45~50HRC |
Part Number | - | D | - | L |
NCLCH10 | - | 20 | - | 50.5 |
Part Number | - | V | - | D | - | L |
FNCLCH | - | V10.5 | - | D19.5 | - | L50.5 |
Part Number | D Selection | L 0.1mm Increment | Unit Price | ||||||||||||||||||||||||||||||||||||
Standard Grade | Precision Grade | ||||||||||||||||||||||||||||||||||||||
Type | V | NCLCH | NCLBH | NCLMH | NCLSSH | ASH | ASC | PASC | SASCH | ||||||||||||||||||||||||||||||
Standard Grade NCLCH NCLBH NCLMH NCLSSH Precision Grade ASH ASC PASC SASCH | 2 | 4 | 5 | 6 | 8 | 10 | 10.0~ 16.0 | ||||||||||||||||||||||||||||||||
3 | 5 | 6 | 8 | 10 | 12 | 10.0~ 25.0 | |||||||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
4 | 5 | 6 | (6) | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 10.0~ 25.0 | ||||||||||||||||||||||||||||
(6)Applicable to V4. | 25.1~ 50.0 | ||||||||||||||||||||||||||||||||||||||
20 | 25 | 10.0~ 25.0 | |||||||||||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
8 | 10 | 12 | (10) | (12) | (13) | (14) | 15 | 16 | 10.0~ 25.0 | ||||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||||||||||
(10)Applicable to V8. (12 13 14)Applicable to V8, 10. | 75.1~ 100.0 | ||||||||||||||||||||||||||||||||||||||
8 | 10 | 12 | 15 | 16 | 20 | 10.0~ 25.0 | |||||||||||||||||||||||||||||||||
(20) | 25 | 25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||||||||||
(20)Not applicable to V20. | 75.1~ 100.0 | ||||||||||||||||||||||||||||||||||||||
8 | 10 | 12 | 15 | 16 | 20 | 25 | 30 | 35 | 10.0~ 25.0 | ||||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||||||||||
75.1~ 100.0 | |||||||||||||||||||||||||||||||||||||||
10 | 12 | 15 | 16 | 20 | 25 | 30 | 40 | 50 | 60 | 10.0~ 25.0 | |||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||||||||||
75.1~ 100.0 |
Part Number | V 0.5mm Increment (V3 or More) | D | L 0.1mm Increment | Unit Price | |||||||||||||
Standard Grade | Precision Grade | ||||||||||||||||
FNCLCH | FNCLBH | FNCLMH | FNCSK | FNCSKB | FNCSKM | FNCLSH | FAS | FASC | FPASC | FASK | FASKB | FASKM | FSASCH | ||||
Standard Grade FNCLCH FNCLBH FNCLMH FNCSK FNCSKB FNCSKM FNCLSH Precision Grade FAS FASC FPASC FASK FASKB FASKM FSASCH | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~90.0 | 4.0~10.0 (0.5mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | - | - | - | - | - | - | - | ||||||||||
75.1~ 100.0 | - | - | - | - | - | - | - | - | - | - | |||||||
10.5~20.0 (0.5mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
21~30 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
31~40 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
41~50 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
51~60 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
61~80 (1mm Increment) | 10.0~ 25.0 | - | |||||||||||||||
25.1~ 50.0 | - | ||||||||||||||||
50.1~ 75.0 | - | ||||||||||||||||
75.1~ 100.0 | - | ||||||||||||||||
81~100 (1mm Increment) | 10.0~ 25.0 | - | |||||||||||||||
25.1~ 50.0 | - | ||||||||||||||||
50.1~ 75.0 | - | ||||||||||||||||
75.1~ 100.0 | - | ||||||||||||||||
Machining Limits of Collar Thickness and Overall Length 10.0L50.0 (D-V)/21 50.1L100.0 (D-V)/23 | Machining Limits of Collar Thickness and Overall Length (Material: EN 1.2510 Equiv.) 4D10 VD-2 61D80 VD-8 10.5D30 VD-4 81D100 VD-10 31D60 VD-6 | Machining Limits of V and Overall Length LVx8 |