We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
ASC4-15-[5-6/0.1]
Description
Hardened Collars/Length +-0.10 & +-0.01 mm/Length Configurable
Stock availability:
On request
If you are inspecting MISUMI ASC4-15-[5-6/0.1], communicate with FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of spare parts and particular attention to each buyer. We value everyone, who liased with us - so, our regular purchasers get the most attractive purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4000 such customers, and we constantly compose new agreements. More than 750 transactions are made per day, because FAMAGA works all over the globe Germany, United Kingdom, Belize, Costa Rica, Eritrea, Tajikistan, Malta, Comoros, Qatar, Equatorial Guinea, Bahamas, Burundi, Georgia, Singapore, Chad, Afghanistan, Russia, Sierra Leone, Guyana, Serbia, Mauritania, Monaco, Latvia, Benin, United States, Montenegro, Kazakhstan, Albania, Switzerland, United Arab Emirates, Macedonia, Samoa, China, Moldova, Mozambique, Mexico, Poland, Lithuania, The Gambia, Brazil, Indonesia, Madagascar, Pakistan, Nepal, Sweden, Chile. A well-elaborated logistics network and a partnership network cheer us to conduct our units anywhere in the earth promptly without undermining product quality.
A special source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the field of manufacturing equipment.
All merchandises from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been provided, and this bulk is rising every day. We are proud that users choose FAMAGA again and again, and we are pleased to make more progressive and technologically innovative industrial equipment so as to stay on the top.
To inquire or place an order, get in touch with us or write a message to the online chat on our official website. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | Material | Surface Treatment | Hardness | |||
L Dimension Configurable | Dimension Configurable | |||||
Standard Grade | Precision Grade | Standard Grade | Precision Grade | |||
NCLCH | ASH | FNCLCH | FAS | EN 1.1191 Equiv. | - | 45~50HRC |
NCLBH | ASC | FNCLBH | FASC | Black Oxide | ||
NCLMH | PASC | FNCLMH | FPASC | Electroless Nickel Plating | ||
- | - | FNCSK | FASK | EN 1.2510 Equiv. | - | 55HRC~ |
FNCSKB | FASKB | Black Oxide | ||||
FNCSKM | FASKM | Electroless Nickel Plating | ||||
NCLSSH | SASCH | FNCLSH | FSASCH | EN 1.4031 Equiv. | - | 45~50HRC |
Part Number | - | D | - | L |
NCLCH10 | - | 20 | - | 50.5 |
Part Number | - | V | - | D | - | L |
FNCLCH | - | V10.5 | - | D19.5 | - | L50.5 |
Part Number | D Selection | L 0.1mm Increment | Unit Price | ||||||||||||||||||||||||||||||||||||
Standard Grade | Precision Grade | ||||||||||||||||||||||||||||||||||||||
Type | V | NCLCH | NCLBH | NCLMH | NCLSSH | ASH | ASC | PASC | SASCH | ||||||||||||||||||||||||||||||
Standard Grade NCLCH NCLBH NCLMH NCLSSH Precision Grade ASH ASC PASC SASCH | 2 | 4 | 5 | 6 | 8 | 10 | 10.0~ 16.0 | ||||||||||||||||||||||||||||||||
3 | 5 | 6 | 8 | 10 | 12 | 10.0~ 25.0 | |||||||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
4 | 5 | 6 | (6) | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 10.0~ 25.0 | ||||||||||||||||||||||||||||
(6)Applicable to V4. | 25.1~ 50.0 | ||||||||||||||||||||||||||||||||||||||
20 | 25 | 10.0~ 25.0 | |||||||||||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
8 | 10 | 12 | (10) | (12) | (13) | (14) | 15 | 16 | 10.0~ 25.0 | ||||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||||||||||
(10)Applicable to V8. (12 13 14)Applicable to V8, 10. | 75.1~ 100.0 | ||||||||||||||||||||||||||||||||||||||
8 | 10 | 12 | 15 | 16 | 20 | 10.0~ 25.0 | |||||||||||||||||||||||||||||||||
(20) | 25 | 25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||||||||||
(20)Not applicable to V20. | 75.1~ 100.0 | ||||||||||||||||||||||||||||||||||||||
8 | 10 | 12 | 15 | 16 | 20 | 25 | 30 | 35 | 10.0~ 25.0 | ||||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||||||||||
75.1~ 100.0 | |||||||||||||||||||||||||||||||||||||||
10 | 12 | 15 | 16 | 20 | 25 | 30 | 40 | 50 | 60 | 10.0~ 25.0 | |||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||||||||||
75.1~ 100.0 |
Part Number | V 0.5mm Increment (V3 or More) | D | L 0.1mm Increment | Unit Price | |||||||||||||
Standard Grade | Precision Grade | ||||||||||||||||
FNCLCH | FNCLBH | FNCLMH | FNCSK | FNCSKB | FNCSKM | FNCLSH | FAS | FASC | FPASC | FASK | FASKB | FASKM | FSASCH | ||||
Standard Grade FNCLCH FNCLBH FNCLMH FNCSK FNCSKB FNCSKM FNCLSH Precision Grade FAS FASC FPASC FASK FASKB FASKM FSASCH | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~90.0 | 4.0~10.0 (0.5mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | - | - | - | - | - | - | - | ||||||||||
75.1~ 100.0 | - | - | - | - | - | - | - | - | - | - | |||||||
10.5~20.0 (0.5mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
21~30 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
31~40 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
41~50 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
51~60 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
61~80 (1mm Increment) | 10.0~ 25.0 | - | |||||||||||||||
25.1~ 50.0 | - | ||||||||||||||||
50.1~ 75.0 | - | ||||||||||||||||
75.1~ 100.0 | - | ||||||||||||||||
81~100 (1mm Increment) | 10.0~ 25.0 | - | |||||||||||||||
25.1~ 50.0 | - | ||||||||||||||||
50.1~ 75.0 | - | ||||||||||||||||
75.1~ 100.0 | - | ||||||||||||||||
Machining Limits of Collar Thickness and Overall Length 10.0L50.0 (D-V)/21 50.1L100.0 (D-V)/23 | Machining Limits of Collar Thickness and Overall Length (Material: EN 1.2510 Equiv.) 4D10 VD-2 61D80 VD-8 10.5D30 VD-4 81D100 VD-10 31D60 VD-6 | Machining Limits of V and Overall Length LVx8 |