We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
ASC12-25-[5-6/0.1]
Description
Hardened Collars/Length +-0.10 & +-0.01 mm/Length Configurable
Stock availability:
On request
If you are seeking MISUMI ASC12-25-[5-6/0.1], communicate with FAMAGA, the world's top supplier of industrialized equipment. Our company has functioned for more than ten years - these are cycles of experience, which are expressed in the quality of spare parts and private attention to each purchaser. We value everyone, who cooperated with us - so, our regular consumers procure the most attractive purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 3500 such purchasers, and we constantly compose new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the planet Germany, United Kingdom, Zambia, Monaco, Bolivia, Moldova, Lesotho, Dominican Republic, Egypt, Philippines, Lithuania, Botswana, Burma, Bahamas, Vietnam, Macedonia, Oman, Eritrea, Albania, Estonia, Indonesia, Mauritius, Belize, Georgia, The Bahamas, Suriname, Sweden, Nicaragua, Yemen, Poland, Burkina Faso, Libya, Kuwait, Uzbekistan, Panama, Mexico, Central African Republic, Fiji, Burundi, Tajikistan, Thailand, Pakistan, Uganda, Malaysia, North Korea, Nepal, Kenya, China, Equatorial Guinea. A well-shaped logistics bond and a partnership network help us to ship our items anywhere in the world immediately without discrediting product quality.
A specific source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the sphere of industrial equipment.
All outputs from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this amount is increasing every day. We are pleased that buyers choose FAMAGA again and again, and we strive to make more developed and technologically modern industrial equipment so as keep on top of it.
To ask a question or order, contact us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Part Number | Material | Surface Treatment | Hardness | |||
L Dimension Configurable | Dimension Configurable | |||||
Standard Grade | Precision Grade | Standard Grade | Precision Grade | |||
NCLCH | ASH | FNCLCH | FAS | EN 1.1191 Equiv. | - | 45~50HRC |
NCLBH | ASC | FNCLBH | FASC | Black Oxide | ||
NCLMH | PASC | FNCLMH | FPASC | Electroless Nickel Plating | ||
- | - | FNCSK | FASK | EN 1.2510 Equiv. | - | 55HRC~ |
FNCSKB | FASKB | Black Oxide | ||||
FNCSKM | FASKM | Electroless Nickel Plating | ||||
NCLSSH | SASCH | FNCLSH | FSASCH | EN 1.4031 Equiv. | - | 45~50HRC |
Part Number | - | D | - | L |
NCLCH10 | - | 20 | - | 50.5 |
Part Number | - | V | - | D | - | L |
FNCLCH | - | V10.5 | - | D19.5 | - | L50.5 |
Part Number | D Selection | L 0.1mm Increment | Unit Price | ||||||||||||||||||||||||||||||||||||
Standard Grade | Precision Grade | ||||||||||||||||||||||||||||||||||||||
Type | V | NCLCH | NCLBH | NCLMH | NCLSSH | ASH | ASC | PASC | SASCH | ||||||||||||||||||||||||||||||
Standard Grade NCLCH NCLBH NCLMH NCLSSH Precision Grade ASH ASC PASC SASCH | 2 | 4 | 5 | 6 | 8 | 10 | 10.0~ 16.0 | ||||||||||||||||||||||||||||||||
3 | 5 | 6 | 8 | 10 | 12 | 10.0~ 25.0 | |||||||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
4 | 5 | 6 | (6) | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 10.0~ 25.0 | ||||||||||||||||||||||||||||
(6)Applicable to V4. | 25.1~ 50.0 | ||||||||||||||||||||||||||||||||||||||
20 | 25 | 10.0~ 25.0 | |||||||||||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
8 | 10 | 12 | (10) | (12) | (13) | (14) | 15 | 16 | 10.0~ 25.0 | ||||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||||||||||
(10)Applicable to V8. (12 13 14)Applicable to V8, 10. | 75.1~ 100.0 | ||||||||||||||||||||||||||||||||||||||
8 | 10 | 12 | 15 | 16 | 20 | 10.0~ 25.0 | |||||||||||||||||||||||||||||||||
(20) | 25 | 25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||||||||||
(20)Not applicable to V20. | 75.1~ 100.0 | ||||||||||||||||||||||||||||||||||||||
8 | 10 | 12 | 15 | 16 | 20 | 25 | 30 | 35 | 10.0~ 25.0 | ||||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||||||||||
75.1~ 100.0 | |||||||||||||||||||||||||||||||||||||||
10 | 12 | 15 | 16 | 20 | 25 | 30 | 40 | 50 | 60 | 10.0~ 25.0 | |||||||||||||||||||||||||||||
25.1~ 50.0 | |||||||||||||||||||||||||||||||||||||||
50.1~ 75.0 | |||||||||||||||||||||||||||||||||||||||
75.1~ 100.0 |
Part Number | V 0.5mm Increment (V3 or More) | D | L 0.1mm Increment | Unit Price | |||||||||||||
Standard Grade | Precision Grade | ||||||||||||||||
FNCLCH | FNCLBH | FNCLMH | FNCSK | FNCSKB | FNCSKM | FNCLSH | FAS | FASC | FPASC | FASK | FASKB | FASKM | FSASCH | ||||
Standard Grade FNCLCH FNCLBH FNCLMH FNCSK FNCSKB FNCSKM FNCLSH Precision Grade FAS FASC FPASC FASK FASKB FASKM FSASCH | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~90.0 | 4.0~10.0 (0.5mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | - | - | - | - | - | - | - | ||||||||||
75.1~ 100.0 | - | - | - | - | - | - | - | - | - | - | |||||||
10.5~20.0 (0.5mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
21~30 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
31~40 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
41~50 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
51~60 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||||
25.1~ 50.0 | |||||||||||||||||
50.1~ 75.0 | |||||||||||||||||
75.1~ 100.0 | |||||||||||||||||
61~80 (1mm Increment) | 10.0~ 25.0 | - | |||||||||||||||
25.1~ 50.0 | - | ||||||||||||||||
50.1~ 75.0 | - | ||||||||||||||||
75.1~ 100.0 | - | ||||||||||||||||
81~100 (1mm Increment) | 10.0~ 25.0 | - | |||||||||||||||
25.1~ 50.0 | - | ||||||||||||||||
50.1~ 75.0 | - | ||||||||||||||||
75.1~ 100.0 | - | ||||||||||||||||
Machining Limits of Collar Thickness and Overall Length 10.0L50.0 (D-V)/21 50.1L100.0 (D-V)/23 | Machining Limits of Collar Thickness and Overall Length (Material: EN 1.2510 Equiv.) 4D10 VD-2 61D80 VD-8 10.5D30 VD-4 81D100 VD-10 31D60 VD-6 | Machining Limits of V and Overall Length LVx8 |