We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PVFPM-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
Description
EN 1.0038 Equiv. Plates (Annealed)/Configurable
Stock availability:
On request
If you are pursuing MISUMI PVFPM-[20-500/0.5]-[20-300/0.5]-[4-50/0.5], reach FAMAGA, the world's central vendor of streamlined equipment. Our company has lasted for more than ten years - these are cycles of experience, which are depicted in the quality of outcomes and special attention to each consumer. We understand everyone, who engaged with us - so, our regular buyers obtain the most acceptable purchase terms and discounts on the factory-made equipment market. Today, there are more than 4000 such purchasers, and we constantly form new agreements. More than 750 purchases are terminated per day, because FAMAGA operates all over the globe Germany, United Kingdom, Sri Lanka, Comoros, Cambodia, Russia, Montenegro, Macedonia, Turkmenistan, Portugal, Eritrea, Swaziland, Haiti, Kazakhstan, The Gambia, Netherlands, New Zealand, Madagascar, Tajikistan, Pakistan, Albania, Kenya, Luxembourg, Jamaica, South Korea, Niger, Burkina Faso, Indonesia, Zimbabwe, United Arab Emirates, Egypt, Central African Republic, Qatar, Mali, Mexico, Nepal, Suriname, Bulgaria, United States, Angola, Peru, Namibia, Djibouti, Senegal, East Timor, Latvia. A well-built logistics system and a partnership network assist us to deliver our products anywhere in the planet quickly without disreputing product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the range of manufacturing equipment.
All products from FAMAGA are assured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been provided, and this number is increasing every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To inquire or order, phone us or send a message to the online chat on our official website. You can also forward a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||
PV | F | Q | M | - | 255 | - | 220 | - | 18 |
6-Surface Finish | ||||||
Part Number | 0.5mm Increment | |||||
Upper-Lower Finish Method | Type | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T |
Selection | Selection | AB | ||||
Milled | PVF | P Q N M | P Q N M | 20~500 | 20~300 | 4~50 |
Rotary Grinding | PVR | 20~500 | 20~300 | 4~50 | ||
Surface Grinding | PVS | 20~500 | 20~300 | 4~50 |
Upper-Lower Finish Method | P | Q | N | M |
Milled | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
Rotary Grinding | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
Surface Grinding | +0.1~+0.2 | 0~+0.1 | 0.05 | -0.1~0 |
A, B Dimension | P | Q | N | M |
250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Item | Upper-Lower Finish Method | |||
Milled | Rotary Grinding | Surface Grinding | ||
Thickness Parallelism (per 100mm) | 0.05 | 0.012 | 0.012 | |
Flatness (per 100mm) | T4~7.5 | 0.1 | 0.05 | 0.05 |
T8~15.5 | 0.07 | 0.03 | 0.03 | |
T16~25.5 | 0.05 | 0.015 | 0.015 | |
T26~50 | 0.05 | 0.012 | 0.012 | |
Perpendicularity of Datum Plane | 0.015 per 100mm | |||
Circumference Chamfering | 6-Surface Finish | C0.2~C0.5 |