We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PPFPM-[25-500/0.5]-[10-300/0.5]-[5-50/0.5]
Description
Duralumin Plates/Configurable A/B and T Dimensions
Stock availability:
On request
If you are seeking MISUMI PPFPM-[25-500/0.5]-[10-300/0.5]-[5-50/0.5], reach FAMAGA, the world's main company of industrial equipment. Our company has advanced for more than ten years - these are cycles of experience, which are depicted in the quality of outcomes and private attention to each customer. We esteem everyone, who worked with us - so, our regular consumers bring in the most acceptable purchase terms and discounts on the factory-made equipment market. Today, there are more than 4000 such clients, and we constantly sign new agreements. More than 750 purchases are terminated per day, because FAMAGA operates all over the planet Germany, United Kingdom, Switzerland, Burkina Faso, The Bahamas, New Zealand, Sri Lanka, Niger, Ukraine, Pakistan, Uzbekistan, Japan, El Salvador, Mozambique, Botswana, United Arab Emirates, Jamaica, Oman, Haiti, Iran, East Timor, Malta, Comoros, Macedonia, South Sudan, Norway, Benin, Yemen, Angola, Albania, Madagascar, Fiji, Vietnam, Mongolia, Finland, Cape Verde, Poland, Costa Rica, The Gambia, Suriname, Peru, Egypt, Nigeria. A well-shaped logistics connection and a partnership network assist us to send our products anywhere in the planet quickly without damaging product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only experts, who already have experience in the sphere of factory-made equipment.
All goods from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been provided, and this quantity is ascending every day. We are proud that consumers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To consult or make a request, phone us or write to the online chat on our official website. You can also send a list of the needful equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||
PP | F | Q | M | - | 255 | - | 220 | - | 18 |
Part Number | 0.5mm Increment | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T | |
Selection | Selection | A≥B | |||||
Standard | PP | F (Milled) S (Surface Grinding) | P Q N M | P Q N M | 25~ 500 | 10~ 300 | 5~ 50 |
Large | L-PP | F (Milled) | 250~ 2400 | 20~ 800 | 3~ 50 |
Upper-Lower Surface Finish | A, B Length | P | Q | N | M |
F (Milled) | 550mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
550.5mm or More | +0.1~+0.4 | 0~+0.3 | 0.15 | -0.3~0 | |
S (Surface Grinding) | +0.1~+0.2 | 0~+0.1 | 0.05 | -0.1~0 |
Upper-Lower Surface Finish | A, B Length | P | Q | N | M |
F (Milled) S (Surface Grinding) | 250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Item | Upper-Lower Surface Finish | ||
F (Milled) | S (Surface Grinding) | ||
Thickness Parallelism (per 100mm) | T3~ 6.5 | 0.05 | 0.025 |
T7~ 12.5 | 0.03 | ||
T13~ 15.5 | 0.05 | ||
T16~ 20.5 | 0.07 | 0.07 | |
T21~ 50 | 0.1 | 0.1 | |
Flatness (per 100mm) | T3~ 8.5 | 0.15 | 0.12 |
T9~ 12.5 | 0.13 | 0.06 | |
T13~ 20.5 | 0.12 | ||
T21~ 50 | 0.1 | ||
Perpendicularity of Datum Plane | 0.015 per 100mm | ||
Circumference Chamfering | Standard | C0.3 or Less | |
Large | C0.1 Fine Chamfering |