We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PPFNP-[25-500/0.5]-[10-300/0.5]-[5-50/0.5]
Description
Duralumin Plates/Configurable A/B and T Dimensions
Stock availability:
On request
If you are inspecting MISUMI PPFNP-[25-500/0.5]-[10-300/0.5]-[5-50/0.5], communicate with FAMAGA, the world's principle producer of machine made equipment. Our company has worked for more than ten years - these are ages of experience, which are expressed in the quality of items and particular attention to each buyer. We value everyone, who liased with us - so, our regular purchasers get the most helpful purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4000 such customers, and we constantly make new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Bolivia, South Korea, Guyana, Uruguay, Italy, Slovakia, Macedonia, Botswana, Turkmenistan, Monaco, Angola, Seychelles, Benin, Vietnam, Philippines, Singapore, Zimbabwe, Australia, Mauritius, North Korea, Mexico, Kiribati, Russia, Kenya, United States, Swaziland, The Gambia, Finland, Indonesia, South Sudan, Switzerland, Laos, Samoa, Estonia, Mozambique, Haiti, Georgia, Sweden, Albania, Mauritania, Iceland. A advanced logistics network and a partnership network cheer us to dispatch our elements anywhere in the planet immediately without undermining product quality.
A specific source of pride for FAMAGA is its team members, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the sphere of factory-made equipment.
All merchandises from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this number is rising every day. We are glad that customers choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To ask a question or make a request, phone us or write a message to the online chat on our official website. You can also send a list of the needful equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||
PP | F | Q | M | - | 255 | - | 220 | - | 18 |
Part Number | 0.5mm Increment | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T | |
Selection | Selection | A≥B | |||||
Standard | PP | F (Milled) S (Surface Grinding) | P Q N M | P Q N M | 25~ 500 | 10~ 300 | 5~ 50 |
Large | L-PP | F (Milled) | 250~ 2400 | 20~ 800 | 3~ 50 |
Upper-Lower Surface Finish | A, B Length | P | Q | N | M |
F (Milled) | 550mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
550.5mm or More | +0.1~+0.4 | 0~+0.3 | 0.15 | -0.3~0 | |
S (Surface Grinding) | +0.1~+0.2 | 0~+0.1 | 0.05 | -0.1~0 |
Upper-Lower Surface Finish | A, B Length | P | Q | N | M |
F (Milled) S (Surface Grinding) | 250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Item | Upper-Lower Surface Finish | ||
F (Milled) | S (Surface Grinding) | ||
Thickness Parallelism (per 100mm) | T3~ 6.5 | 0.05 | 0.025 |
T7~ 12.5 | 0.03 | ||
T13~ 15.5 | 0.05 | ||
T16~ 20.5 | 0.07 | 0.07 | |
T21~ 50 | 0.1 | 0.1 | |
Flatness (per 100mm) | T3~ 8.5 | 0.15 | 0.12 |
T9~ 12.5 | 0.13 | 0.06 | |
T13~ 20.5 | 0.12 | ||
T21~ 50 | 0.1 | ||
Perpendicularity of Datum Plane | 0.015 per 100mm | ||
Circumference Chamfering | Standard | C0.3 or Less | |
Large | C0.1 Fine Chamfering |