We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PPFNM-[25-500/0.5]-[10-300/0.5]-[5-50/0.5]
Description
Duralumin Plates/Configurable A/B and T Dimensions
Stock availability:
On request
If you are questing MISUMI PPFNM-[25-500/0.5]-[10-300/0.5]-[5-50/0.5], reach FAMAGA, the world's dominant retailer of mechanized equipment. Our company has progressed for more than ten years - these are years of experience, which are depicted in the quality of outcomes and individual attention to each user. We esteem everyone, who collaborated with us - so, our regular clients accept the most acceptable purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4000 such buyers, and we constantly arrange new agreements. More than 750 contracts are concluded per day, because FAMAGA operates all over the planet Germany, United Kingdom, Togo, Poland, Nicaragua, Central African Republic, Dominican Republic, Chile, Kiribati, Benin, Liechtenstein, The Bahamas, The Gambia, Comoros, United States, Switzerland, Croatia, Romania, Tajikistan, New Zealand, Costa Rica, Tonga, Afghanistan, India, El Salvador, Ukraine, Ireland, Kuwait, Georgia, Samoa, Brunei, Russia, Bolivia, Zambia, Pakistan, Luxembourg, Seychelles, Zimbabwe, Jamaica, Dominica, Finland, Belarus, Mongolia. A well-developed logistics bond and a partnership network help us to ship our goods anywhere in the planet with no delay without compromising product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the sphere of factory-made equipment.
All items from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been provided, and this quantity is ascending every day. We are glad that purchasers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To get some advice or make a request, phone us or send a message to the online chat on our official website. You can also send a list of the needful equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||
PP | F | Q | M | - | 255 | - | 220 | - | 18 |
Part Number | 0.5mm Increment | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T | |
Selection | Selection | A≥B | |||||
Standard | PP | F (Milled) S (Surface Grinding) | P Q N M | P Q N M | 25~ 500 | 10~ 300 | 5~ 50 |
Large | L-PP | F (Milled) | 250~ 2400 | 20~ 800 | 3~ 50 |
Upper-Lower Surface Finish | A, B Length | P | Q | N | M |
F (Milled) | 550mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
550.5mm or More | +0.1~+0.4 | 0~+0.3 | 0.15 | -0.3~0 | |
S (Surface Grinding) | +0.1~+0.2 | 0~+0.1 | 0.05 | -0.1~0 |
Upper-Lower Surface Finish | A, B Length | P | Q | N | M |
F (Milled) S (Surface Grinding) | 250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Item | Upper-Lower Surface Finish | ||
F (Milled) | S (Surface Grinding) | ||
Thickness Parallelism (per 100mm) | T3~ 6.5 | 0.05 | 0.025 |
T7~ 12.5 | 0.03 | ||
T13~ 15.5 | 0.05 | ||
T16~ 20.5 | 0.07 | 0.07 | |
T21~ 50 | 0.1 | 0.1 | |
Flatness (per 100mm) | T3~ 8.5 | 0.15 | 0.12 |
T9~ 12.5 | 0.13 | 0.06 | |
T13~ 20.5 | 0.12 | ||
T21~ 50 | 0.1 | ||
Perpendicularity of Datum Plane | 0.015 per 100mm | ||
Circumference Chamfering | Standard | C0.3 or Less | |
Large | C0.1 Fine Chamfering |