We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
P79FPP-[25-500/0.5]-[20-300/0.5]-[7-50/0.5]
Description
Aluminium Alloy Plates 7000 Series/Configurable A/B and T Dimensions
Stock availability:
On request
If you are looking for MISUMI P79FPP-[25-500/0.5]-[20-300/0.5]-[7-50/0.5], communicate with FAMAGA, the world's central vendor of streamlined equipment. Our company has lasted for more than ten years - these are ages of experience, which are expressed in the quality of items and personalseparate attention to each consumer. We admire everyone, who engaged with us - so, our regular customers obtain the most helpful purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4000 such consumers, and we constantly compose new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Pakistan, Swaziland, Malaysia, Dominican Republic, Montenegro, Namibia, Seychelles, Tonga, Philippines, Switzerland, Morocco, Comoros, Finland, China, El Salvador, Singapore, Russia, Eritrea, Fiji, Armenia, Sweden, Argentina, United Arab Emirates, Greece, Mexico, Zimbabwe, Bolivia, South Korea, Mauritius, Panama, Samoa, Hungary, Poland, Guatemala, Nepal, Cyprus, Togo, Jamaica, Burkina Faso, Indonesia, Slovakia. A well-elaborated logistics system and a partnership network cheer us to conduct our elements anywhere in the planet immediately without discrediting product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the sphere of factory-made equipment.
All outcomes from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that customers choose FAMAGA again and again, and we are happy to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To request or make a request, phone us or write a message to the online chat on our official website. You can also send a list of the needful equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||
P79 | F | Q | M | - | 255 | - | 220 | - | 18 |
Part Number | 0.5mm Increment | |||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T |
AB | ||||||
P79 | F (Milled) | P Q N M | P Q N M | 25~500 | 20~300 | 7~50 |
T | P | Q | N | M |
Tolerance | +0.1~+0.3 | 0~0.2 | 0.1 | -0.2~0 |
A, B Length | P | Q | N | M |
250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5~500mm | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Item | Upper-Lower Surface Finish | |
F (Milled) | ||
Thickness Parallelism (per 100mm) | T7~12.5 | 0.05 |
T13~15.5 | ||
T16~20.5 | 0.07 | |
T21~50 | 0.1 | |
Flatness (per 100mm) | T7~8.5 | 0.15 |
T9~12.5 | 0.13 | |
T13~20.5 | 0.12 | |
T21~50 | 0.1 | |
Perpendicularity of Datum Plane | 0.03 per 100mm | |
Circumference Chamfering | C0.3 or Less |
Part Number | A | T B | 7~10 | 10.5~15 | 15.5~20 | 20.5~25 | 25.5~30 | 30.5~35 | 35.5~40 | 40.5~45 | 45.5~50 |
P79F | 25 ~ 50 | 20~50 | |||||||||
50.5~ 75 | |||||||||||
75.5~ 100 | |||||||||||
100.5~ 250 | |||||||||||
50.5~ 75 | 50.5~75 | ||||||||||
75.5~ 100 | |||||||||||
100.5~ 200 | |||||||||||
200.5~ 500 | |||||||||||
75.5~ 100 | 75.5~100 | ||||||||||
100.5~ 200 | |||||||||||
200.5~ 300 | |||||||||||
300.5~ 500 | |||||||||||
100.5~ 250 | 100.5~125 | ||||||||||
250.5~ 500 | |||||||||||
125.5~ 300 | 125.5~150 | ||||||||||
300.5~ 500 | |||||||||||
150.5~ 300 | 150.5~160 | ||||||||||
300.5~ 500 | |||||||||||
160.5~ 500 | 160.5~200 | ||||||||||
200.5~ 500 | 200.5~250 | ||||||||||
250.5~ 500 | 250.5~300 |