We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SCFS-[10-500/0.1]-[10-200/0.1]-[5-60/0.1]
Description
Metal Blocks/Configurable A/B and T Dimensions (0.1mm Increment)
Stock availability:
On request
If you are looking for MISUMI SCFS-[10-500/0.1]-[10-200/0.1]-[5-60/0.1], reach FAMAGA, the world's central company of streamlined equipment. Our company has lasted for more than ten years - these are cycles of experience, which are depicted in the quality of goods and personalseparate attention to each consumer. We esteem everyone, who engaged with us - so, our regular customers obtain the most acceptable purchase terms and discounts on the factory-made equipment market. Today, there are more than 4000 such consumers, and we constantly compose new agreements. More than 700 purchases are terminated per day, because FAMAGA operates all over the planet Germany, United Kingdom, Finland, Moldova, Tajikistan, Angola, Togo, Singapore, Jamaica, Bosnia and Herzegovina, Monaco, Turkey, Lithuania, Guinea, Malaysia, Oman, Ecuador, Slovakia, Zambia, Mexico, Panama, Jordan, Bolivia, Albania, India, Benin, Sweden, Luxembourg, Belize, Iraq, Norway, Syria, Switzerland, Seychelles, South Sudan, Serbia, Central African Republic, Zimbabwe, Brunei, Laos, Swaziland, Costa Rica, Morocco, Greece, Comoros, Egypt. A well-elaborated logistics system and a partnership network assist us to conduct our products anywhere in the planet immediately without discrediting product quality.
A particular source of dignity for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the sphere of manufacturing equipment.
All products from FAMAGA are guaranteed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are glad that consumers choose FAMAGA again and again, and we are glad to make more advanced and technologically advanced industrial equipment so as to stay on the top.
To ask a question or book, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | Material | Hardness |
SSFB | EN 1.0038 Equiv. | - |
SCFB | EN 1.1206 Equiv. | - |
SCNFB | EN 1.1206 Equiv. Thermal Refined | 253HRC |
SCFF | EN 1.4305 Equiv. | - |
SCFS | EN 1.4301 Equiv. | - |
Part Number | - | A | - | B | - | T |
SCFB | - | 30.5 | - | 20.6 | - | 17.1 |
Item | EN 1.0038 Equiv. EN 1.1206 Equiv. EN 1.1206 Equiv. Thermal Refined | EN 1.4305 Equiv. EN 1.4301 Equiv. | |
Thickness Parallelism (per 100mm) | 0.02 | 0.05 | |
Flatness (per 100mm) | T1.5~7.9 | 0.04 | 0.1 |
T8~15.9 | 0.07 | ||
T16~ | 0.05 | ||
Perpendicularity (Each Plane) | 0.02 per 100mm | ||
Circumference Chamfering | C0.5 or Less |
0.1mm Increment | T: 0.1mm Increment | |||||
A | T B | 1.5~9.9 | 5.0~9.9 | |||
SSFB | SCFB | SCNFB | SCFF | SCFS | ||
10.0~60.0 | 10.0~60.0 | |||||
60.1~100.0 | ||||||
10.0~60.0 | 60.1~100.0 | - | - | |||
60.1~100.0 | - | - |
0.1mm Increment | T: 0.1mm Increment | |||||||||||||||
A | T B | 10.0~20.0 | 20.1~30.0 | 30.1~40.0 | ||||||||||||
SSFB | SCFB | SCNFB | SCFF | SCFS | SSFB | SCFB | SCNFB | SCFF | SCFS | SSFB | SCFB | SCNFB | SCFF | SCFS | ||
10.0~ 60.0 | 10.0~60.0 | |||||||||||||||
60.1~ 100.0 | ||||||||||||||||
100.1~ 130.0 | ||||||||||||||||
130.1~ 160.0 | ||||||||||||||||
160.1~ 180.0 | ||||||||||||||||
180.1~ 200.0 | ||||||||||||||||
200.1~ 250.0 | 20.0~60.0 | - | - | - | ||||||||||||
250.1~ 300.0 | - | - | - | |||||||||||||
300.1~ 350.0 | - | - | - | |||||||||||||
350.1~ 400.0 | - | - | - | |||||||||||||
400.1~ 450.0 | - | - | - | |||||||||||||
450.1~ 500.0 | - | - | - | |||||||||||||
10.0~ 60.0 | 60.1~100.0 | |||||||||||||||
60.1~ 100.0 | ||||||||||||||||
100.1~ 130.0 | ||||||||||||||||
130.1~ 160.0 | ||||||||||||||||
160.1~ 180.0 | ||||||||||||||||
180.1~ 200.0 | ||||||||||||||||
200.1~ 250.0 | - | - | - | |||||||||||||
250.1~ 300.0 | - | - | - | |||||||||||||
300.1~ 350.0 | - | - | - | |||||||||||||
350.1~ 400.0 | - | - | - | |||||||||||||
400.1~ 450.0 | - | - | - | |||||||||||||
450.1~ 500.0 | - | - | - | |||||||||||||
10.0~ 60.0 | 100.1~130.0 | |||||||||||||||
60.1~ 100.0 | ||||||||||||||||
100.1~ 130.0 | ||||||||||||||||
130.1~ 160.0 | ||||||||||||||||
160.1~ 180.0 | ||||||||||||||||
180.1~ 200.0 | ||||||||||||||||
200.1~ 250.0 | - | - | - | |||||||||||||
250.1~ 300.0 | - | - | - | |||||||||||||
300.1~ 350.0 | - | - | - | |||||||||||||
350.1~ 400.0 | - | - | - | |||||||||||||
400.1~ 450.0 | - | - | - | |||||||||||||
450.1~ 500.0 | - | - | - | |||||||||||||
10.0~ 60.0 | 130.1~160.0 | |||||||||||||||
60.1~ 100.0 | ||||||||||||||||
100.1~ 130.0 | ||||||||||||||||
130.1~ 160.0 | ||||||||||||||||
160.1~ 180.0 | ||||||||||||||||
180.1~ 200.0 | ||||||||||||||||
200.1~ 250.0 | - | - | - | |||||||||||||
250.1~ 300.0 | - | - | - | |||||||||||||
300.1~ 350.0 | - | - | - | |||||||||||||
350.1~ 400.0 | - | - | - | |||||||||||||
400.1~ 450.0 | - | - | - | |||||||||||||
450.1~ 500.0 | - | - | - | |||||||||||||
10.0~ 60.0 | 160.1~180.0 | |||||||||||||||
60.1~ 100.0 | ||||||||||||||||
100.1~ 130.0 | ||||||||||||||||
130.1~ 160.0 | ||||||||||||||||
160.1~ 180.0 | ||||||||||||||||
180.1~ 200.0 | ||||||||||||||||
200.1~ 250.0 | - | - | - | |||||||||||||
250.1~ 300.0 | - | - | - | |||||||||||||
300.1~ 350.0 | - | - | - | |||||||||||||
350.1~ 400.0 | - | - | - | |||||||||||||
400.1~ 450.0 | - | - | - | |||||||||||||
450.1~ 500.0 | - | - | - | |||||||||||||
10.0~ 60.0 | 180.1~200.0 | |||||||||||||||
60.1~ 100.0 | ||||||||||||||||
100.1~ 130.0 | ||||||||||||||||
130.1~ 160.0 | ||||||||||||||||
160.1~ 180.0 | ||||||||||||||||
180.1~ 200.0 | ||||||||||||||||
200.1~ 250.0 | - | - | - | |||||||||||||
250.1~ 300.0 | - | - | - | |||||||||||||
300.1~ 350.0 | - | - | - | |||||||||||||
350.1~ 400.0 | - | - | - | |||||||||||||
400.1~ 450.0 | - | - | - | |||||||||||||
450.1~ 500.0 | - | - | - |
0.1mm Increment | T: 0.1mm Increment | ||||||||||||||||||
A | T B | 40.1~50.0 | 50.1~60.0 | 60.1~70 | 70.1~80 | 80.1~90 | 90.1~100 | ||||||||||||
SSFB | SCFB | SCNFB | SCFF | SCFS | SSFB | SCFB | SCNFB | SCFF | SCFS | SSFB | SCFB | SSFB | SCFB | SSFB | SCFB | SSFB | SCFB | ||
10.0~ 60.0 | 10.0~60.0 | ||||||||||||||||||
60.1~ 100.0 | |||||||||||||||||||
100.1~ 130.0 | |||||||||||||||||||
130.1~ 160.0 | |||||||||||||||||||
160.1~ 180.0 | |||||||||||||||||||
180.1~ 200.0 | |||||||||||||||||||
200.1~ 250.0 | 20.0~60.0 | - | - | - | - | - | - | - | - | - | - | ||||||||
250.1~ 300.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
300.1~ 350.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
350.1~ 400.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
400.1~ 450.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
450.1~ 500.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
10.0~ 60.0 | 60.1~100.0 | ||||||||||||||||||
60.1~ 100.0 | |||||||||||||||||||
100.1~ 130.0 | |||||||||||||||||||
130.1~ 160.0 | |||||||||||||||||||
160.1~ 180.0 | |||||||||||||||||||
180.1~ 200.0 | |||||||||||||||||||
200.1~ 250.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
250.1~ 300.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
300.1~ 350.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
350.1~ 400.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
400.1~ 450.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
450.1~ 500.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
10.0~ 60.0 | 100.1~130.0 | ||||||||||||||||||
60.1~ 100.0 | |||||||||||||||||||
100.1~ 130.0 | |||||||||||||||||||
130.1~ 160.0 | |||||||||||||||||||
160.1~ 180.0 | |||||||||||||||||||
180.1~ 200.0 | |||||||||||||||||||
200.1~ 250.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
250.1~ 300.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
300.1~ 350.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
350.1~ 400.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
400.1~ 450.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
450.1~ 500.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
10.0~ 60.0 | 130.1~160.0 | ||||||||||||||||||
60.1~ 100.0 | |||||||||||||||||||
100.1~ 130.0 | |||||||||||||||||||
130.1~ 160.0 | |||||||||||||||||||
160.1~ 180.0 | |||||||||||||||||||
180.1~ 200.0 | |||||||||||||||||||
200.1~ 250.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
250.1~ 300.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
300.1~ 350.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
350.1~ 400.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
400.1~ 450.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
450.1~ 500.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
10.0~ 60.0 | 160.1~180.0 | ||||||||||||||||||
60.1~ 100.0 | |||||||||||||||||||
100.1~ 130.0 | |||||||||||||||||||
130.1~ 160.0 | |||||||||||||||||||
160.1~ 180.0 | |||||||||||||||||||
180.1~ 200.0 | |||||||||||||||||||
200.1~ 250.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
250.1~ 300.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
300.1~ 350.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
350.1~ 400.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
400.1~ 450.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
450.1~ 500.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
10.0~ 60.0 | 180.1~200.0 | ||||||||||||||||||
60.1~ 100.0 | |||||||||||||||||||
100.1~ 130.0 | |||||||||||||||||||
130.1~ 160.0 | |||||||||||||||||||
160.1~ 180.0 | |||||||||||||||||||
180.1~ 200.0 | |||||||||||||||||||
200.1~ 250.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
250.1~ 300.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
300.1~ 350.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
350.1~ 400.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
400.1~ 450.0 | - | - | - | - | - | - | - | - | - | - | |||||||||
450.1~ 500.0 | - | - | - | - | - | - | - | - | - | - |